Making A Cleaver From A Saw Blade
Вставка
- Опубліковано 9 бер 2024
- Welcome to my channel. In this video, I made a meat cleaver. To be honest, I didn't succeed the first time. It turned out to be very difficult for me, but I did it anyway. If you liked the video, please like it and don't forget to share it with your friends. See you later!)
Hello Sir,
Thank you for filming your build. A true craftsman you are and I'm sure you've inspired many people in different walks of life's to succeed.
A super super film with a beautiful end product, thank you.
Thank you, your comments are inspiring)))
This is beautifully done!!!
Your craftsmanship is excellent. Keep it up
Amazing talent. Thank you for sharing.
Seu trabalho foi simplesmente perfeito. parabéns.
Adorei o procedimento técnico e o produto enfim uma obra maravilhosa Parabéns .
always good to watch and learn . TY
Thanks 🙏
Você é um ótimo artesão muito linda essa faca meus parabéns .
Great job. 🎉Congratulations!
beautiful..... great job, fantastic result!!!
Thanks ☺️
Parabéns ficou show
Excellent work ❤
Nice video, the guy doesn't have bandages on his hands or fingers, carefully executed.
Super jest to wykonany ten toporek Pozdrawiam serdecznie twórca tego filmu. 👍👍👍👍👍
Thanks ☺️
Wow, very nice sharp knife
Really appreciated. Very nice job done.
Thanks ☺️
Excelente trabalho, parabéns.
Deus te abençoe pelo seu talento!
Очень чётко и красиво.
Parabéns pelo trabalho
Parabéns meu chapa top demais
Excelente trabalho, parabéns
madeira do cabo bonita tambem....
щсс😅
Perfect good job
Number 1 mate👏👏👏
Craftsmanship was excellent the blade would be very sharp. The blade is everlasting and hard but brittle too since it was hardened saw blade it was again hardened. So while using it on large bones extream care need to take or else it will break.
Trabalho perfeito.
Very good making👌
Ficou linda peça parabéns
Có gửi về Việt Nam kg
Muito bom !
Great job
Very good Congratulations
🙂🙂🙂
Very nice piece..❗🤔👍🏻
May i ask why you don"t do your grinding when Steel is in an Annealed state & rather after hardening & quenching in Oil, 3 times..⁉️🤔
Hello. Since the steel is thin, I would not recommend making descents before quenching, as the steel can twist 🙂
@@edwardknives8692
Thank you..❗ That answers why in 80's when buying Blade Steel on thikness annealed then ginding and sending in for hardening and tempering often came back warped..⁉️🤔 The only problem i found working on a deceased Knifemakers Blank which i finished off with Handles in Stone Carved 3 Dimensionaly myself "Buffalo" was that the Edge had a "Burn" blemish on edge which a couldn't Polish away after endless attempts i Pearled/ Jeweled the entire Blade similair to the Bolts on Rifles, it was done for a Collector, which i did a Yellowood Stump Case with Knife inlet, lined with Felt & a Glass Lid & handmade Stainless Steel hinges, the front of the Case (Stump/log) was retained with it's Aging & weathered marks whilst all other sides were cut & plained true' etc..(1991)
Was a fun project which i did for my Old Boss, retired Senior Partner of an Arch' Practice..❗🙇♂️
Shalowm ❗🙏🏻
1 вопрос эта сталь подвергается корозии если я не ошибаюсь,чем протравливаете.
Nice job
Top kerja yg bagus 👍
Молодец
very nice
И снова, просто прекрасно!!!
😊
ОГОНЬ!!! А какая толщина у таких дисков?
Спасибо)
2.6-2.7
wao krem❤
Very smart
Nice ✌👍
wow ❤❤❤
Отлично молодец
😊👍
❤️👍👍👍
Có bán sang việt nam không bạn tôi đặt hàng con dao này ở đâu
Nice
молодец! по латуни можно было бы еще набить простым бойком как бы чешую и чуть дать патины..., - очень красиво смотрится!
Nice..
🇮🇩👌Good Joob.. 👍👍👍
Bonito trabajo, nomás el filo no me convence, cuando se presume una cuchilla bien afilada debe rasurar, un papel lo corta cualquier filo de media calidad.
good job🙏🙏
😊
Top
Where to buy such Cleaver?
verry good
Nice job I one please
😳👌👌👍👍
Do u sell them? I would like to buy one. ☝️
Wow nice
🙂🙂🙂
Lam dao hay quá mình đang ky video của bạn xong rồi lại đang ky video mình nhé 👍♥️
❤👌🙄👍👍👍👍
Cómo cuánto saldrá una pieza de esa muy bonita por sierto
Зачем было отжигать :потом калить и " отпускать. Сталь там замечательная - лучше не сделать а просверлить можно победитом. ; а у ручки болгаркой можно выбрать хоть зачисным хоть лепестковым. Мутетень по русски.
Что за метал какая твердость после закалки зачем обух закаливать будет хрупкое изделия тем более топорик не выдерживает рубки!!!!!
😃🥰😍🤩
😊👍
Magkano
Send it to the Philippines!!!
Show de bola.
এই অস্ত্র আমি ১পিচ চাই।
Perfect 👏👏👏👏🇧🇷🇧🇷🇧🇷
Hi
Tangan yang trampil
Give me sel
Ni dari orang yg dipasang belengguh dike pala dia minta ditarok balek kpd orng yg menarok dia dengan ilmu dia sebagai BB siapa mereka pembe rontak penjajah peng hianat agaa Islam yg.mlkkn per buatan yg tidak diriza kn oleh Allah dengan ilmu gayib
Trotz Kanalsperre dieser Spam 😡😡😡😡😡😡😡 ständig! Kein Interesse 🤮🤮🤮🤮🤮🤮🤮🤮
کار بیبار فوق العاده ای هست ممنون میشم به کاناا ما هم سر بزنید
How MUCh
A knife made from a saw blade may last a long time after sharpening, but may be brittle after quenching. And it’s too laborious to sharpen. It is not as strong and easy to sharpen as the knife using Forge welding.
Dope AF results, @edwardknives8692! Any food service professional would be proud to own this knife!
Thanks you 😊
Great job