Thanks for the feedback. You can't make a stone board,but you can make designs based on the stone board that you have just as seen in the video. I hope this helps
Thank you very much for this tutorial, God bless you Please ma, is there a easier way to open and close the machine. It's giving me shoulder pain Thank you for your response
Thanks so much for the feedback. I would like to suggest that you should ensure that the machine be placed on a table that's not too low for you so as to reduce the shoulder ache you mentioned. Hope it was helpful?
Thanks so much for the feedback. I would like to suggest that you should ensure that the machine be placed on a table that's not too low for you so as to reduce the shoulder ache you mentioned. Hope it was helpful?
Congratulations! Pls ensure you check the setting properly so as to ensure that its functioning well. If it still doesn't produce enough heat as it should be,pls contact your seller or supplier. I hope this helps? Thanks for the feedback.
Chiffon is a very tender and delicate fabric. You can use between 80-110 for the temperature and less than 30 seconds for the timing. Pls be careful with it so as not to ruin your fabric. I hope this helps. Thanks for the feedback.
Thanks for the feedback. Steam press machine is an advanced method of ironing, it requires you putting water in its tank for the steam. It's basically for ironing,but It's been used for stoning in this part of the world of which it can also be used for. While Heat transfer machine can be used for a lot of things,it's more like an industrial machine.it doesn't require water before it generates its heat. Its heat is higher than the other. Hope this helps.
Really can't tell because I don't use Generator to power it. But hopefully, a very big generator that has a high capacity should be able to power it. Thanks for the feedback, hope this helps?
Thanks for the feedback. Abayas are mostly of light fabrics, You can use between 120-150 as the temperature and 60 secs as the timing. I hope this helps? Pls help share and like our videos. Thanks for watching.
Thanks for the feedback. You can use between 100-150 temperature. I set my timer for 60secs,you can also set yours as 60 secs or increase it. I hope this helps? Pls don't forget to subscribe and help share our videos. Thanks
Thanks for the feedback. Can't tell its current price cause of daily increase of general prices of goods,but should be between 150k-200k. I hope this helps?
Thanks for the feedback Can't really tell of its current price cause of the current inflation,I got mine for 125k last year,shouldn't be more than 150k now. Hope this helps?
This is super helpful
Thanks for sharing
Hello, thank you for the totorial, does the machine comes with the patterns?
Thanks for the feedback.
No,it doesn't come with patterns.
Please ma what’s the difference between heat transfer and stoning machine?
❤ thank you so much for sharing. Pls how can I make a stone board
Thanks for the feedback.
You can't make a stone board,but you can make designs based on the stone board that you have just as seen in the video.
I hope this helps
Thank you very much for this tutorial, God bless you
Please ma, is there a easier way to open and close the machine. It's giving me shoulder pain
Thank you for your response
Thanks so much for the feedback.
I would like to suggest that you should ensure that the machine be placed on a table that's not too low for you so as to reduce the shoulder ache you mentioned.
Hope it was helpful?
Thanks so much for the feedback.
I would like to suggest that you should ensure that the machine be placed on a table that's not too low for you so as to reduce the shoulder ache you mentioned.
Hope it was helpful?
Thanks u for sharing ur experience with us ,,, but pls ma my machine i on it and it not hot
Congratulations!
Pls ensure you check the setting properly so as to ensure that its functioning well.
If it still doesn't produce enough heat as it should be,pls contact your seller or supplier.
I hope this helps?
Thanks for the feedback.
Caus i just buy it new ,, , but it not hot at alll ,,,, or ais there any i will do with it
Please ma, can I use to attached ordinary stones to my ankara fabric?
Thanks for the feedback.
Yes, you can use it to attach stones to your fabrics.
Pls help subscribe, like and share .
God bless you.
Please what temperature and time can I use for a chiffon material 😊
Chiffon is a very tender and delicate fabric. You can use between 80-110 for the temperature and less than 30 seconds for the timing.
Pls be careful with it so as not to ruin your fabric.
I hope this helps.
Thanks for the feedback.
Ma please what brand of heat press is this and how much inches
Thanks for the feedback.
It's two lion, 35*35 inches.
Hope this helps?
Pls don't forget to subscribe, like and help our videos.
Thanks.
Very nice please where will i get the stoning machine to buy
Thanks for the feedback.
Can be gotten from any store that sells sewing machines and the likes.
Pls what was the temperature you used, I usual find it difficult to use my heat press machine because the manual is written in Spanish.
Thanks so much for your feedback.
It all depends on the nature of fabric involved,I use between 180-220 for the temperature.
Hope it was helpful?
Thanks
Weldone madam, please where did you buy that design from. The design you transferred to your fabric? Thanks
Thanks for the feedback.
Got the design from Dubai.
How can we get them
Thanks for the tutorial. Am interested , please furnish me with cost and where to obtain it in nigeria
Its price can't be ascertained because of changes in prices of goods on daily basis.
Budget between 150k-200k
Good afternoon madam, like how much can I get this machine, where and how can I get it. THANKS
Thanks for the feedback.
I actually got mine for 125k in 2021.
Can't tell the current price now.
Just budget between 125k-135k.
Hope this helps?
Hello ma please how much does it cost to get this beautiful machine thank you
Thanks for the feedback.
Can't really tell rhe current price.
Should be between #150k-200k.
Hope this helps.
Pls ma how many stone can I use for a dress with stone in the chest, the sleeve and the down part of the gown
Thanks for the feedback.
It all depends on the design on your dress.
You can use as much as you can to achieve the required design.
I hope this helps.
@PurpleFashionInn Thanks ❤️
Pls what is the brand name of your heat press machine and the size, thanks for your reply ma
Thanks for your feedback.
Mine is two lion,size 35(if I'm right with the size)
Job well done ma.
But ma pls what's the difference between the heat and steam press stone machines. Thanks in anticipation ma
Thanks for the feedback.
Steam press machine is an advanced method of ironing, it requires you putting water in its tank for the steam.
It's basically for ironing,but It's been used for stoning in this part of the world of which it can also be used for.
While Heat transfer machine can be used for a lot of things,it's more like an industrial machine.it doesn't require water before it generates its heat.
Its heat is higher than the other.
Hope this helps.
@@PurpleFashionInn Yes it does ma.... Thanks and God bless you.
Can I use generator to operate the heat press stone machine in d absence of NEPA?
Really can't tell because I don't use Generator to power it. But hopefully, a very big generator that has a high capacity should be able to power it.
Thanks for the feedback, hope this helps?
Hope this machine doesn’t burn fabrics
What if it’s a chiffon material ...how can it be switch to silk
Can you tell me mam in Abayas which temperature is suitable and timing
Thanks for the feedback.
Abayas are mostly of light fabrics,
You can use between 120-150 as the temperature and 60 secs as the timing.
I hope this helps?
Pls help share and like our videos.
Thanks for watching.
Done 💖
Please what temperature n time can i use on an ankara fabric?
Thanks for the feedback.
You can use between 100-150 temperature. I set my timer for 60secs,you can also set yours as 60 secs or increase it.
I hope this helps?
Pls don't forget to subscribe and help share our videos.
Thanks
I need the machine how can i get one
Visit a nearby market where tailoring machineries are sold.
I hope this helps.
What is machine price
Thanks for the feedback.
Can't really ascertain the current price ,it should be between 150k-180k Nigeria money.
Hope it was helpful?
Indian money please
@zibranmohammed2974 .
I'm sorry,i can't ascertain it in Indian money,I'm only familiar with the Nigeria currency.
Thanks
Ma i dont get how to set the temperature
Beautiful
If its on a long dress, how do we put long dress on the machine to transfer the stones
Pls how much. can I get the Mach
Thanks for the feedback.
Can't tell its current price cause of daily increase of general prices of goods,but should be between 150k-200k.
I hope this helps?
How much is the machine
Thanks for the feedback.
Can't Really ascertain the current price.
Between 140k-160k
Please i am de french woman
Can you give me de price in dollars? and where are your shop
Thanks
Please ma'am, what is the size of the machine
Thanks for the feedback.
I'm not sure,but seems it "35 by 35".
I hope this helps?
Pls ma can one the ordinary stone or must it be a sticker stone
Thanks for your feedback.
It has to be stones has glue.
Hope this helps?
Nice how will I get some l mean the mahcing
Thanks for the feedback.
I currently do not have it for sale,but you can get it at any market/store where sewing items are sold.
Hope this helps 🙏
How much please
Thanks for the feedback
Can't really tell of its current price cause of the current inflation,I got mine for 125k last year,shouldn't be more than 150k now.
Hope this helps?
Location
@@hasanausmanzuwairiya2046 Nigeria
Ma please can one use it to iron cloth
Thanks for your feedback back.
One can,but it's very risky cause it generates a high level of heat.
Hello i want buy it where are you
Thanks for your feedback.
Pls,What do you intend buying?
@@rahamamuhammad3355 ,
@@PurpleFashionInn good morning ma
Tank u ma
Thanks for the feedback.
Hope this helps?
Pls don't forget to subscribe, share, and like our videos.
God bless 🙌.
How much cost it is
Thanks for the feedback.
Sir,It's not for sale,it's just for tutorial.
Hope you find the tutorial helpful?
Please ma how much is the machine
Hello,I got mine here in Nigeria for #125,000
Only for stone or you use it for other things
I will love to have one it's quite expensive
Can i put my padded blouse with breast cup in it for stonning?
Thanks for the feedback.
You can but it might have an effect of the padded part of the blouse.
M m m new.
Caus i just buy it new ,, , but it not hot at alll ,,,, or ais there any i will do with it
Thanks for the feedback.
If you bought it brand new,pls contact your seller,something could be wrong with it.
Beautiful
Caus i just buy it new ,, , but it not hot at alll ,,,, or ais there any i will do with it