Soudal Fix All Turbo 20 minute test

Поділитися
Вставка
  • Опубліковано 18 жов 2024
  • Just how fast is Turbo? We put the adhesive to the test, using it to adhere three pieces of wood and allowing it 20 minutes to bond. Taken in one take, with a timer - to show you what Turbo means.

КОМЕНТАРІ • 8

  • @olvsec
    @olvsec 2 місяці тому

    maar wat ik me nu afvraag waarom doen ze zoveel fix al aan het houten blockje kan het niet wat minder

  • @GIORGI02051986
    @GIORGI02051986 4 роки тому

    I know that TK power boost tech hybrid sealant clear is yours. This was realy great sealant, with good adhesive properties and elasticity, just it needs more time to cure and it is not so strong like fixall clear 320 kg/10sqcm. I used before TK and SELSIL hybrid clear sealants for glass many times and was ok. But fix all clear 320kg/sqcm is lowest quality sealant compare to others. Here is the problems: on CLEAN glass some areas of sealant start to dry very quickly, but some areas not. Sealant makes lots of bubbles everywhere, but after approx when 1/3 of sealant was out from the tube bubble formation start to decrease. After i cut cured sealant with knife and i check strength of the rubber: some rubber breaks very easily, but some rubber was realy strong, after rubbing with hand on some areas rubber fall out like a sand. it was same after 3 or 4 days later. Sealant was new, unopened, exp date: january. After failing of course i buy different sealant MOMENT ONE FOR ALL and i finished my job with no problem.

  • @kuzgun_TR
    @kuzgun_TR 3 роки тому

    Can it bond carbon or glass fiber composite materials?

  • @torl8924
    @torl8924 5 років тому +2

    Is this a shoe commercial?

    • @pfetechnologies
      @pfetechnologies  5 років тому +1

      Hah! No, as you can see, it's a video of an experiment. It would not have been appropriate to do this experiment barefoot!

  • @maurod2433
    @maurod2433 6 років тому

    ottima colla ma non mi risulta dalle mie prove che indurisce in 20 minuti e neppure dopo tre ore. dopo 24 ore e veramente tenace

    • @pfetechnologies
      @pfetechnologies  6 років тому

      Sorry, we relied on Google Translate to understand your comment. Do note that hardening (curing) time is different from bonding time. Also, the adhesive strength depends on factors such as temperature/humidity and the materials used. But you can see in our experiment that it was able to hold 60+kg after 20 minutes, with a small bonding surface area of only 9 sqcm. The video was shot in one take and never edited so you can see genuine results.

  • @laradresden5914
    @laradresden5914 5 років тому +1

    stupid demo