This turned out awesome. It's beautiful & your idea is very cool. That said, Please wear a respirator when working with resins even the UV quickly drying resins. Quick drying resins put out fumes very quickly. People are getting permanent lung damage and asthma working with all resins. As a content creator you want people to do the things you show in the safest way possible! Your lungs matter too. Please set a good example for everyone. I mean this in the kindest way possible. 😊💕
OMG… What a brilliant idea that was Michelle!! I’m off to my craft room to make myself some silicone inlays… especially for the lights! I believe this really is a game changer… well it certainly is for me!! Thank you so very much for sharing your ideas with us! 🤗 Can’t wait to see how the next one works, with the dome light! Much love from Nat. ♥️♥️🇦🇺
I know I can’t wait to try the dome one. I just got my new silicone in today so I’m going to try to make another one with the new silicone to see the difference.
Hi Michelle, this is my 1st time seeing your channel. Making that mold was a great idea. I’m glad it worked & the frog came out so cute. I also wanted to let you know that I did subscribe..
Thauts a great frog😊 i love your idea with the cord power bar what a great idea im going too try somethig similar and too hide the wires a little bit try adding in a bit of fantasy film maybe in little strips around the wire with leaves added on I think that might be a very nice look also
I have an idea for you about the dragon eye that got covered in mica ( 5:20 ). You should be able to scratch off (with an x-acto blade or something similar) the resin that’s on top of the obscured glass eye. Because it’s glass, it should be safe. Once you’ve scratched off the mica/resin that’s covering the eye (so you can see it again), you can dome it with clear UV resin.
Next time, try wrapping the LED lights around a thin pencil or pen, so it forms one long tight coil. Should be easier to lay it in without the wires being bulked up and creating a "hot spot" in the center where a bunch of lights land together with the folding technique. I'd like to see if that helps you at all.
i dabble in resin crafts too , I don't make videos though . I make jewelry pendants . I don't sell them , its just something to do when I'm bored. suggestion for unmolding , canned air, the kind they sell in the electronic section . Helps loosen the silicon from the resin .
I hope you’re gonna pan that plug before someone steals in on you. People are rotten. That’s a wonderful idea. I’m kind of jealous. I wish I thought of it. Good luck with it. I’ll buy one. I don’t like those plugs hanging around. Good luck.
For that one I used nicpro but I just made one today from let’s resin and it’s a much softer one. I’ll try that out on Sunday to see how it works out. I’ll let everyone know what one works better if there is even a difference.
No it didn’t. I usually measure my molds with water before hand unless I’m going to use it that day. That way I make sure there is no water left in it.
@@Easeldoesitstudio Thank you make much sense 💜💜💜 this from came out truly beautiful thank you for the tips even the fairy light battery pack holder 🤌🏽✍🏽 brilliant
So nice to hear how supportive your followers are. ❤
This frog is absolutely beautiful!! Thank you so much for sharing!! God bless!!🤗
Thank you
This turned out awesome. It's beautiful & your idea is very cool. That said, Please wear a respirator when working with resins even the UV quickly drying resins. Quick drying resins put out fumes very quickly. People are getting permanent lung damage and asthma working with all resins. As a content creator you want people to do the things you show in the safest way possible! Your lungs matter too. Please set a good example for everyone. I mean this in the kindest way possible. 😊💕
OMG I absolutely 💕😘💕 the colors and the flowers you choose. What amazing work you do. Keep the videos coming.
Thank you so much
OMG… What a brilliant idea that was Michelle!! I’m off to my craft room to make myself some silicone inlays… especially for the lights! I believe this really is a game changer… well it certainly is for me!!
Thank you so very much for sharing your ideas with us! 🤗
Can’t wait to see how the next one works, with the dome light!
Much love from Nat. ♥️♥️🇦🇺
I know I can’t wait to try the dome one. I just got my new silicone in today so I’m going to try to make another one with the new silicone to see the difference.
Wow. Great idea. I love it when a plan comes together! I also give you props for checking the lights in it first.
Thank you
Absolutely gorgeous x so glad im not the only one who lost their antlers and had to buy another one lol x
lol
That is an awesome prototype. I love it.
Thank you
I like this technique. Thanks for sharing!
Hi Michelle, this is my 1st time seeing your channel. Making that mold was a great idea. I’m glad it worked & the frog came out so cute. I also wanted to let you know that I did subscribe..
Thank you so much. Welcome to my channel
Great Job 😊 She is Gorgeous ❤
How cute is that frog, he's gorgeous with his flowers & lights
That is BEAUTIFUL!!!!
Thank you
He is sooo cute! Great idea for the plug!
Thank you
The frog is beautiful! 😍 And I love the idea for the plug! 🤩
Love this idea Michelle 🤩😍
Turned out great! Reminds me of the transparent frogs that you can see their organs inside!
They are adorable 🎉
That frog is so adorable. Love all the extras. Just my 1 cent
Great job!!
Thauts a great frog😊 i love your idea with the cord power bar what a great idea im going too try somethig similar and too hide the wires a little bit try adding in a bit of fantasy film maybe in little strips around the wire with leaves added on I think that might be a very nice look also
That sounds awesome. Let me know how it comes out
Really cute little elk. The frog is beautiful 😍
I have an idea for you about the dragon eye that got covered in mica ( 5:20 ). You should be able to scratch off (with an x-acto blade or something similar) the resin that’s on top of the obscured glass eye. Because it’s glass, it should be safe. Once you’ve scratched off the mica/resin that’s covering the eye (so you can see it again), you can dome it with clear UV resin.
Congratulations, that is great 👍, it is a game changer. 🎉
I actually like the wires, kind of reminds me of neurographic art, or zen doodling.
Really awesome work! Ive always hated the hanging battery pack/switch...
The frog is adorable.
What size were those eyes, and where can I get them? Beautiful work.
The frog is so cute!❤
Next time, try wrapping the LED lights around a thin pencil or pen, so it forms one long tight coil. Should be easier to lay it in without the wires being bulked up and creating a "hot spot" in the center where a bunch of lights land together with the folding technique. I'd like to see if that helps you at all.
i dabble in resin crafts too , I don't make videos though . I make jewelry pendants . I don't sell them , its just something to do when I'm bored. suggestion for unmolding , canned air, the kind they sell in the electronic section . Helps loosen the silicon from the resin .
It’s a good past time.
Hi Michelle, excellent project. how you made the mold for the battery holder. Greetings from Mexico.
I had the same issue with an eye on a turtle mold 🤦🏼♀️ But the prof is gorgeous!!❤
Thank you
I love your frog it's beautiful you know frogs stand for faithfully rely on God
It's a glass frog. They are real. 🐸
The plug is such a wonderful idea! How did you make it? Would love to know!!
I just used silicone
@@Easeldoesitstudio thank you!
Omg that’s amazing I love the colour ❤❤❤❤
Thank you
I hope you’re gonna pan that plug before someone steals in on you. People are rotten. That’s a wonderful idea. I’m kind of jealous. I wish I thought of it. Good luck with it. I’ll buy one. I don’t like those plugs hanging around. Good luck.
I don’t like those cords and switches hanging out either that’s why I racked my brain to fix that problem.
That came out so adorable. I love it.
How did you make the plug?
Hi beautiful frog 🐸, love it 😍 new sub thanks for sharing ❤ xx
Welcome to my channel. Thank you
FYI, those are antlers, not ears! 😂 Fantastic idea with the frog, can’t wait to see a tealight critter! 💕
I know sometimes words are hard. lol 😂
@@Easeldoesitstudio Lol!
❤❤❤❤❤ Love It!
I would love to buy that silicone plug!
Where did you find that deer coaster mold please!
I got it on Temu. Here is the link.
share.temu.com/RDtpgGyM2rA
@@Easeldoesitstudio thank you much!!! Cheaper than amazon!!! Yayy!!
Love the frog! Will you sell the plug plug? Lol. I have a puppy that i would love to do without the plug hanging out. Thanks
The plugs are now on my website.
www.easeldoesitstudio.com
Beautiful, how did you make the plug? Omg❤
Gee it's a wonder you can do anything with those gloves on
I use alcohol ink in resin and like anything else that you add to resin it’s a ratio thing, if you use too much it won’t set .😅✌️
The little hippos are super hated to de- mold too lol. Super cute but crazy difficult.
They are super hard to demold but are super cute.
Did the package of your mole or on your mold? Say how many ounces is supposed to be added? I’ve never seen that on any of my molds that’s helpful
Beautiful!
Thanks
Hey, get some silicone mold removal spray. From Michael's. It works 😊
Super cute, are those just plain white fariy lights? 🙂
Yes they are.
Confused. What is the plug for, and what is it made of?
It’s so I can glue the fairy lights battery pack in the frog so it’s not hanging out. It is made of silicon so it peels right out of the resin
Game changer is an understatement 🎉
Are you protecting your eyes and skin from that UV light?
Yes I am.
What and how did you make the plug..
I used silicon and made a template out of cardboard
What's the link b for the lights please,, ty
a.co/d/ioU0PzJ
Adorable! What kind of silicone did you use?
For that one I used nicpro but I just made one today from let’s resin and it’s a much softer one. I’ll try that out on Sunday to see how it works out. I’ll let everyone know what one works better if there is even a difference.
@@Easeldoesitstudio Thanks! I'll be watching!
Put soapy water in the molds so the project will come out no alcohol, alcohol will make the resin dull and also sticky
Than you I did not know that
Adorei ❤❤❤❤
Cute
Not acceptable that you say "oh my god" , seriously not acceptable
calm down!
Did the package of your mole or on your mold? Say how many ounces is supposed to be added? I’ve never seen that on any of my molds that’s helpful
No it didn’t. I usually measure my molds with water before hand unless I’m going to use it that day. That way I make sure there is no water left in it.
@@Easeldoesitstudio Thank you make much sense 💜💜💜 this from came out truly beautiful thank you for the tips even the fairy light battery pack holder 🤌🏽✍🏽 brilliant