Це відео не доступне.
Перепрошуємо.
How to Change the Spark Plugs and Wires in a Corvette
- Додати в
- Мій плейлист
- Переглянути пізніше
- Поділитися
Поділитися
Вставка
Розмір відео:
- Опубліковано 18 сер 2024
КОМЕНТАРІ • 290
Наступне
Автоматичне відтворення
Spark Plug Replacement DIY (the ULTIMATE Guide)ChrisFix
Переглядів 5 млн
How To Replace Spark Plugs And Wires 1992-1994 C4 CorvetteHomeowner Repair
Переглядів 13 тис.
C4 Corvette: ALL The QUIRKS!Retro Cars Forever
Переглядів 164 тис.
НАСТУП ЗСУ НА БЄЛГОРОД. Залужного підставили! Новий план Сирського. Евакуація з Курщини! КорчинськийДмитро Корчинський
Переглядів 390 тис.
МАФИЯ в РЕАЛЬНОЙ ЖИЗНИ: Масленников, Матвиенко, Булкин, Сабина, Бустер, Дилара, Гурам, Леон, ЯнчикДима Масленников
Переглядів 7 млн
ВСУ наступают под Курском. Путин требует действий. Эвакуация в Белгородской области. НОВОСТИРадио Свобода. Новости
Переглядів 1,9 млн
СТАСЯ МАКЄЄВА: СЕРДЮЧКА на гендер паті. Тато ЗРАДЖУВАВ, коли мама хворіла на РАК. Коли українською?Okay Eva
Переглядів 482 тис.
The Most Underrated Car in the World - C4 CorvetteWorthless Whips
Переглядів 755 тис.
What actually happens when you overfill your motor oil? (w/ transparent oil pan)Garage 54
Переглядів 4,3 млн
Diagnose Engine Misfire Issues by Reading Your Spark PlugsRatchets And Wrenches
Переглядів 333 тис.
Part 5. Back to Basics. DIY Tune Up. Spark Plugs and Wires.Etwas Bauen
Переглядів 9 тис.
7 Cheap MUST HAVE Mods That Are GUARANTEED TO Make Your C4 Corvette FASTER!Mr Random Reviews
Переглядів 157 тис.
C4 Corvette Suspension Setups, All The Differences Explained 1984-1996Mirrock Corvette
Переглядів 43 тис.
C4 CORVETTE: Top 5 Problem Areas (And How To Fix Them)Retro Cars Forever
Переглядів 396 тис.
How Much Weight can you REMOVE from your Car? (Weight Reduction)ChrisFix
Переглядів 10 млн
Don’t Fear The Fourth Generation CorvettesHemmings
Переглядів 6 тис.
Битва умов. ❤️ПІДПИШИСЬ! Андрій Попик. чат рулетка.Андрій Попик чат рулетка
Переглядів 470 тис.
7 Days Stranded In A CaveMrBeast
Переглядів 56 млн
Survive 100 Days In Nuclear Bunker, Win $500,000MrBeast
Переглядів 157 млн
Державний Прапор України підняли на КУРЩИНІ в рф😍🇺🇦💪🏻 #курськ #прапорукраїни #рф #війна #наступТелеканал Конкурент TV - новини Луцька та Волині
Переглядів 432 тис.
How I Did The SELF BENDING Spoon 😱🥄 #shortsWian
Переглядів 35 млн
«Це край, де я родилася й живу! І нікуди я звідси не поїду» #shortvideoСуспільне Запоріжжя
Переглядів 534 тис.
SCHOOLBOY RUNAWAY В РЕАЛЬНОЙ ЖИЗНИ 📚🔔 #schoolboy #runaway #schoolboyrunaway #shorts YOUNGYOUNG
Переглядів 2,3 млн
КУРСЬК, СПИШ? | Упс, а що трапилось #75Aleksey Durnev
Переглядів 775 тис.
It’s absolutely insane that you made this video when I was 8 years old and now it’s helping me with my corvette. Thanks a million for getting me into cars and for all your great videos that have helped me.
This is hands down the best video on YT explaining how to replace wires and plugs on a C4. I really liked how you anticipated questions and showed the "hard parts" without wasting time showing everything. Yes, this video is 10 years old and you have likely moved on. Oh, and at the end showing the graphic was another great bonus.
I'm glad the video is still helpful all these years later! Thanks!
Yes! And one other thing. Do you have a video series only on the C4? If so, can you link me to them? Thanks.
@@moodberryfr @crisfix could you make a playlist wit all ur old c4 videos? Theyre so helpful!
Sweet! That was the whole idea of the video! To allow fellow Vette owners to see what they need to do to get the job done!
I owe you a beer. Thanks. All your Corvette videos are priceless.
hahaha, thanks man! Put them to good use! That's why I made them, to help others!!! Glad it worked for ya!
Update, I figured a simple hack to get all the Driver's Side boots on the Optispark. Just unbolt the Tensioner Pulley and remove it, (16 mm bolt) this gives you much more room and leverage to get the boots on #1, #7, #3 and #5. I found that a 16 mm box wrench works best to get the Tensioner bolt off, as I didn't have enough clearance between the frame member and the bolt to get a ratchet on it.
Also, another hack for installing the #8 plug: Slip the plug into a magnetic 5/8" socket, face forward, lean over the right front tire and with your left hand, reach back with the socket and plug with your wrist turned outwards. This worked the first time I tried it after numerous failed attempts. (and choice swear words.)
That #8 plug was like wrestling a bear,, Thanks for all the C4 videos.
+Vetteboy- 53 Haha, yea it is tight in there. No problem!
Really helpful, thanks for these vids. Just got my 92 on Saturday after 15 years with a C3. Awesome car. UK Vette owner!
Really
Hoe much did u pay for yours
Thanks man! Exactly, it's so rewarding fixing your own car!
Thanks so much. 10 years later still a great video. Couldn't find anything this detailed on this engine, and just picked up a '95 z28 camaro. thank you once again.
Glad to help man! That is why I make these how to videos!!! It is such an easy job, but also such a frustrating one!
I just did this job myself. Removing the belt tensioner pulley itself was a huge help as it gave much more room to get your hand at the optispark on the driver's side.
I change the spark plugs in my grandpa’s 1941 Studebaker once. I’ve learned a lot about fixing cars from you keep it up Chris.
I took my time today. I finished the passenger side. Tomorrow I’ll tackle the driver side. Thanks a bunch for great suggestions that do work.
What helped me was to remove the tensioner and a pulley. Both in fact needed to be replaced. With them out of the way I could easily see the driver side Optispark plug wire connections. Thanks again for your encouragement.
I successfully changed the spark plugs in my '94 this weekend. This video was invaluable help!
AWESOME!!!! I am glad the video was helpful and you change your plugs!!!
I'm in the middle of doing this job at the moment. Just finished the passenger side. The plugs I took out were burned down to the electrodes; I guess the PO didn't relish tackling this job. Tough but doable. Can't wait to drive my car with fresh plugs! (My other car is a 1980 MGB. Changing the plugs on that is a joy.)
You improved the quality drastically! I watch every seconds you share.
I am training a snake to help me to reach those tight place
lol
cool to see chris reply to comments on his 6 year old vid
I'd almost say it'd be faster to pull the fucking motor
Will you rent him out 🙏 plz
Dude...Your the man! Thanks so much. I have a 96 Vette and was having the hardest time with the wires on the driver's side.
Probably the best video on UA-cam about this topic. Maybe why the guy has almost 9 million subscribers😯
A lot of the other videos are a joke compared to this!👍
I loved doing plugs on my 96 LT1. I purchased a 3/8s , 90 degree ratchet from Mid America made to help with changing the plugs. It sits in my tool box and I haven't used it since 2006.
My 91 ZR1 is easier to change the wires and super easy to do just plugs. Being that the LT5 is a hemi the plugs sit right on top of each cylinder. It's not that hard to pull the plenum to change out coils and wires.
Can't imagine a header swap on an LT1 Vette because it's so damn tight! I've owned a lot of performance vehicles in my 50 year span on this planet and my 95' Vette tops it...
Corvette Coupe Yea, it is a little tight. Not too bad, but not as open and easy as it should be! The C4 is a great car!
I was 7 when this video came out now it’s helping me with my vette😂
No prob! Glad to help!
No prob! Glad they are helpful! I make more as I fix things lol.
Nice video. A little helpful idea is to use a fine point Sharpie to mark the boots or wire with the correct number as well. If you want to get fancy, there are marking bands, rings, and labels available from MSD, Accel, and many other sources.
Chris Fix.....best how to car vids out there. I have a 94 C4 and your Corvette segments have been a great help. Can you do a video on replacing weatherstripping on the doors? The inner door panel needs good weatherstrip to seat right.
It's not too bad. Especially since it wears out only once every 15yrs. Worth the coolness of hide-a-ways!
Wow, what a mission, well done Chris, thanks for the excellent video.
Thanks Chris. Good content and the diagram at the end is very useful. Firing order is a bit important.
tackled this today... Thanks for the video ChrisFIx!.. Not sure if mentiond yet but if you go ahead and remove the tensioner 1( 14 mm bolt) makes things nearly as easy as passenger side;)
+Ohman Bret bmods Awesome! Glad the video was helpful and thanks for the tip!
You're awesome man. Third time you've saved my butt with a C4 guide.
Great video, I never would have guessed that panel pops out on the driver side wheel well.
Thx replaced all this yesterday and now my engine is running new. Just a word of advice. My 92 LT1 looks a little different in the ASR area. When I removed it I broke a small vacuumed line under it so might wanna warn them of that. It was a real easy fix though.
Well done. Thanks. The fun in the hobby is all about finding creative solutions. Not once are you affraid of the next challenge. Keep it up.
No problem! Hope it helped out!
Just a little tip for number 8 spark plug I used a vacuum hose at the tip of the spark plug lined it up in the hole and I started twisting the vacuum hose to get it started or till it Bottomed out then I use the ratchet to tighten it down it can save a whole lot of time you're welcome just give me a thumbs up
This was before you had a good tool collection. You’ve come along way.
I realize this was one of your first videos but when applying anything on spark plugs, you don't need to gunk it on. A few small dabs of whatever product you want to use, then roll your finger or Qtip around the threads. To much of that anti seize globbed on can make it's way to the plug electrode and ground out the plug. To much of that silicone globs up the connections, causes mis fires.
Well the Corvette team from Chevy did an awesome job. LOL
a v12 would be so much fun :o
Great! Glad the video helped!
Where do the two wires go that have straight ends? The six others have angled boots for the spark plugs. Thanks for great videos
Chris i have been watching your videos for years now enjoying all of them 📹 that opti spark location bad design by GM 💧 water pump right over it
Thanks and no problem... This was the hardest video I ever made... so hard to explain what to do and to get into the tight spaces with the camera!
Chris why do you sound like it's a burden in these old videos in the new ones you sound extremely enthusiastic
$$$
Please Chris! make a video on how to change the Optispark on the LT1. They eventually all go bad on every LT1. I have a 1994 Camaro Z/28 and I’m thinking of changing it in case one day it just ceases to work.
JDPINTERNATIONAL That would be a mistake, if your optispark is working don’t change it, you could install a new one and have it go bad, chances are new could go bad sooner than the one you have now that’s working ,very common. As far as an opti goes if it ain’t broke don’t fix it
@@huskybrushape Before thinking the optispark is the issue with your car problem, check the Ignition Control Module (ICM) and the Ignition Coil located on the upper right front of the motor. I went through this nightmare of being told by 3 different professional dealers that the optispark needed replacing on my '95? GM dealers did not want to do the job because no GM part was available anymore and the record of after-market optisparks had very high failure rates. There was nothing wrong with my optispark, the ICM was the issue. If replacing the ICM, make sure to find a GM part, as I went through two after-market parts from O'Reilys that failed. NOW, if replacing an optispark, go to Petris Enterprises, Scottsboro, Alabama. They make a great optispark that I installed thru all of this nonsense of not checking the ICM first. If you have to replace the optispark, call Petris...
Helped me alot on my 96, thanks.
was just bouta run this for my LT4 96, so its still all tha same?
@getoffmydick777 Yeah, pretty sure
Thanks for the quick reply, it is only the main display (speedo, fuel into etc) nothing else is affected. I am hoping it is something simple like earthing or poor connection, tapping the screen as I say sometimes clears it, as does hitting a bump in the road, will have a go on the forum as you suggest.
Outstanding vid sir..
Chris you are awesome, I need to pull out spark plug 1 to get to TDC to put the harmonic dampner back on, you turn a nightmare into a a scary thought. I had to replace the new distributor i put in 8 months ago and put the old one back in, which only needed a cap n roptopr rep[lace
very helpful, I have a 94 also that i will be doing come spring, your tips will make the job go alot smoother for sure
Chris you are the man hop all the best for you
great video.. very clear. Haven't started yet but doing my Power Steering pump and water pump at the same time so I should have even more room. Still haven't actually seen my Opti yet...must be under there somewhere. Bad place to put it for such routine maintenance.
Ty Tojo Juggling Thanks man! The opti is hiding under and below the water pump.
woooow good job man the best .its the first time i see how to do the driver side
Getting ready to go in, god help me...🙄
Yea, it is the first time you do it. The second time it isnt as bad!
This is tricky. Does anything else go crazy (Climate control, information center above the climate control, radio, etc)? Might want to ask the people on the corvetteforum. They are helpful for specific stuff like this.
Not really. They sell the larger diameter ones, but they wont fit very easily. Plus, the resistance of the wire is different, and since the Vette has a fiberglass firewall, you could get interference with your radio. Stock wires are the way to go. Corvette did an awesome job designing this car so...
Helped a bunch, thanks for sharing Chris.....
Great! Glad the video was helpful!
Such a big help mate. Thank you
ChrisFix, your C4 is the only other one online I can find that only has 3 cables going to the ASR box instead of 4 that have a Transmission Throttle Cable as well. Why do ours only have 3 and how do I adjust the slider on the throttle cable to the ASR box to it's proper position as in calibrate it.
Where did you order the plugs from? I’m interested because you mentioned they are individually numbered. Thank you
On my 92 there was a second metal pipe leading from somewheres. It was preventing me from pulling the wires across the pulleys like you did. However, completely removing the belt tensioner was the answer. Once it was out of the way you had a clear shot of the optispark and could pull the wires straight through. Also the heat protection looks very pathetic, thin plastic that tightly wraps around the cord. I will be replacing that with something more effective.
Interesting, thanks for sharing!
That plastic on the wires isn't really a heat protection, more likely to prevent chafing. I'm surprised Chris didn't mention that to you.
Awesome video need to more of the corvette!😃
Nice thing about using a spark plug socket. Not only does the rubber protect the ceramic, it also aids in gripping the spark plug for easy removal.
to be correct i meant to say "aides" in gripping the spark plug.
Dano C. II
Merci du français ! Thanks for this vidéo thatt helps me alot. Mickael from France
I am glad the video was helpful!
Thanks for this video, Chris. You are always clear and precise. You might freshen up on the correct names of some of the tools you are using so you don't end up calling a socket a ratchet, etc... but great video !
This is an old video (one of my first) so things are a little different with the new ones ;)
Excellent job. :-) Thank you for taking the time & trouble to video this.
What is the correct opinion on cleaning spark plugs that were running on rich mixture? should it be done or would it ruin anything?
Taking off the belt tensioner gives plenty of access to the opti wires on drivers side !
I paused the video and noticed that 6&8 are the ones that use the straight plug wire.
Very helpful, thanks
Nice, maybe it just got vibrated off the connection to the dash and you just need to push the connection back in...
Hey man! Great video. Truly helpful. It was able to concur the driver side with ease by accessing the option spark from underneath the car. After all, I’m experiencing some issues. The engine stalls & stops after starting & going into gear. Trying to diagnose it myself before handing it over to pros. I came across a 9th spark plug wire below the throttle body. I was curious why there were ten wires but only eight plugs. But now I see there is a 9th to replace but not a 10th. Do you have an idea or is that in fact an “extra?”
Thanks a lot! I believe the 2 extra wires are connected to the coil terminal and electrical harness, but it might be different depending on the exact configuration!
Hey. So I replaced the 9th wire which connected to the 9th port on the optispark looked around but can’t find where the 10th wire would go. Can you recall for sure that it in fact takes 10 wires? My car was stalling immediately after going into gear but now that I’ve changed that 9th wire, it hasn’t stalled or given me any issues since. Lol I’d really like to be done with this task
Hey Chris I wanted to know if you can post something (vid or just text) on how to test or rule out a problem with the optispark on a C4 LT1. Thanks!
What are your symptoms? Misfiring is the most common issue.
Chris you and I have similar tastes in cars as I have a 94 vette and a 2002 Tbird and Mustang. Do you know anywhere to get new parts for the vette? I’m losing capabilities in mine such as ABS, antislip, cruise control, ac controls, and tire pressure sensors due to lack of parts. My mechanic, the most knowledgeable in my area won’t put used parts on my car.
Thanks. I need help with the frame rail
Ground strap attaching point. It is supposed to go somewhere on the engine. Mine appears to be held on with a self tapping screw attached to the catalytic converter bracket.
Where is the correct attaching point ?
Great job, Thank you!
Chris, I wish you lived next door to me, my 95 Vette and I would have a sense of inner peace knowing you were there to help. Ever think about moving to San Diego? Ol buddy ol pal? 😁
Chris, Great video. I have a '94 Corvette and I am getting all the parts together to do the wires and plugs along with the Optispark and the waterpump, coil and ICM. My question is as an update to this older video.... What are your thoughts on using anti-sieze on spark plug threads now that they are applying special platings to the threads. I know most plug manufacturers are now saying DO NOT use anti-sieze on the plated plugs. I plan on using NGK TR55-IX plugs in my Vette. NGK has a tech bulletin out advising NOT to use anti-sieze. Thanks again. Great videos on the Vette and all your others. BTW, do you still own that Red '96 Vette that was in your waterpump replace video ?
Good video but, it is a pia job. I've broken a few plugs taking them out (by using the universal attachment )
Personally I’d just disconnect the battery to keep it from dying
And shorting
There is the easy side (passenger) and the hard as F side (driver). And don't try to put 8mm plug wires in those looms made for 7mm, will never work, need to change the looms.
Good video, but I cringe when I see dialectric grease placed on connections. It should be used on the boots...not on the metal terminals. It is non-conductive, just like the boot, and prevents arcing.
TheToppingGroup Thanks for the tip!
Incorrect. Dielectric grease has little to no impact on conductivity. Dielectric grease is used to minimize micro-corrosion of the electrical contact surfaces.
You should clean the contact surfaces (could be as simple as cleaning with a pencil eraser) and then apply a dab of dielectric grease to inhibit corrosion of the contact surfaces you just cleaned.
Whats the difference in the Corvette LT1 and the Camaro LT1? I have a 96 Camaro Z28.
Unfortunately for me, I got Pacesetter shorty headers and access to the driver side plugs is a royal bitch because of how they decided to make the bends in the primaries. Mostly #5.
Just had my spark plug wire go bad on #6, causing a misfire.
Love it
Hey Chris, I had my clutch replaced and my 92 base model vette now keeps throwing ASR & ABS messages. In first gear at start up, it pulls back with humming behind me. Can you give any advice? Thanks!
Hey Chris, what size wires did you use on your Vette? My car has 7mm. I was thinking about getting 8mm. But they might not fit on the wire holder.
Looks like a pain in the ass! Nice video though. I'm sure you'll help a lot of Vette owners!
Chris: Great video, very helpful But....how did you get the Driver's Side plug boots on the Optispark? I managed to get #1, #7 and #3 on without too much cursing, but #5 (Top receptacle) is a bear. I cant figure out how to get it on. Any advice?
great vid thanks
How much would it cost at the dealer for oil change, wires, and plugs? Labor and parts.
Gotta do it on my Camaro
“Yaaay”
Chrisfix
I did all the plugs and the passenger wires. But for the life of me I can't get the wires to come out of the opti spark from the driver side. Do you know of a way to get them unstuck?
Thanks
Great video helped me a lot.
It's a 1996 corvette
tomas puigjane If you can get a thin crow bar or something similar to pry the plugs off, that might help.
Hi Chris I have a 96 and it's all original parts. I want to do a full service on it. Any other recommendations other then plugs and filter's Or anyone else out there can help me out?
To install the plug wires on the drivers side would it make sense to remove the idler pulley to gain easier access to the Opti? thanks
I didnt do that, but it might help. If it helps you get your hand in there, then go for it. Its easy enough!
Which brand of plug wires did you use?
AC Delco for plugs and wires. They have a certain resistance (which the Vette is tuned to) so it doesnt cause interference with the electronics because the Vette has a fiberglass firewall.
love the DriftStang more