I really need you guys to assist me. Since I bought mine. When I plug it it dose not communicate instead it will just ask me to wail aimlessly and after a while it will still not come up. Just still butting
following the manual to a T and I get the updater downloaded, extracted and installed but it will not launch the actual program where it actually registers the machine.
does the boot version at 4:11 change after the update? cause mine freezes when I scan my nissan, when i choose nissan on the original firmware it goes to another menu showing " automatic" and manual select. on the updated firmware when i choose nissan it freezes nothin g happens.
No matter what I do.. once you go to the site download.. it will not open for any reason..why must people make things so damn difficult.. any suggestion
I downloaded the files. It was for and I get an error message on my notebook with Windows 10 "No Device Found". I never got to open up the program to even begin the process of registering or upgrading to the card. Any ideas?
This scanner VII +2 is a nightmare! It took forever to finally load the silly thing after using three different laptops for the down load. The OEM site is Chinese and is extremely difficult to register! As an example, they ask for dealer code? Well guess what! No dealer code, no register, no download! I got the scanner on e-bay and the seller told me it was not necessary to register! It took quite a while before I was finally able to use it. I found out after the fact that it will not correct nor remove soft codes on some Fords after it was fixed! Just thought you should know!
i had the same problem I found out how go here launchtechusa.com/ support/download CRHD update after download it will be named LaunchDIY_Update_Setup_v1.05.000
Supposed there are fakes and from what I can tell, the x431 are the international one that doesn't get supported in the US. I got the crp129 standard unit that's targeted for US markets
@@Mtech_Performance I went to website and did update, it took me like 30 min to figure it out. But video made it easy . It was awhile ago so I dont remember exactly, but I know once I found it on website it was easy.. finding the correct model and download is the hardest ..
The password can be found in Help > Tool Information > Register Code. The password is the numbers and letters to the right of where it says Register Code.
I can't even get the exe update to open their program at all, it just installs click finish and nothin doesn't open at all zero idea what to do now this tools useless without the update.
@@timvest8141 my wife ended up figuring it out on her tablet not sure what she did long time ago and it works just fine now it updated properly actually pretty good unit it works very well
i just updated my Creader Vii+ tonight. It was not easy and had to go to another website for the update tool download. But once the correct software is downloaded (Windows only), the rest of the process is smooth.
@@fsoliz3296 I am not sure if YT will let me post this link but you ultimately want to end up here: eninfo.x431.com/products.aspx?TypeId=68&fid=t3:68:3 On the bottom left you will see 'Tool Updating Download' This is what you want. Follow the steps and you should be OK.
@@DIZEMANPHOTO Click on link. On bottom of page you will see pages one through six. Go to page 2. On page 2 you will see the machine Creader V11+. Click on that. Once that page down loads, you will see 'Tool Updating Download' right in the middle of the page. Try to follow the directions from there.
Where is your car? Why are you using this with your computer? Does it detect problems with a computer? Where is the actual instructions manual? I don't like putting Chinese anything in my computer and I don't like downloading anything. Especially Chinese stuff. I don't have a Chinese car. Diagnostics should come from the car manufacturer directly.
Thank you so much for this video. Definitely came in the clutch!
Thanks, this video saved me from throwing this device against the wall
Thank you so much for the help! This helped me with the Creader VIII registering and updating.
Glad it helped :)
Dude can u tell me how can download this page
I really need you guys to assist me. Since I bought mine. When I plug it it dose not communicate instead it will just ask me to wail aimlessly and after a while it will still not come up. Just still butting
i just got a launch Creader vii+ following the manual to the t but not getting on that web site its taking me to a different site
Launch creader vii+ can not scan toyota indonesia and daihatsu,,,,what can i do??????
sir this update procedure you show in your video is creadear vii+ is the same to update creadear viii thanks
could you post the register link i must be typing something wrong
tried updating software close upon hitting the download button to get updates
i cant find this page
I can update with windows 10
My friend gave me his that he had in his closet forever and he forgot the login information can I still use it
following the manual to a T and I get the updater downloaded, extracted and installed but it will not launch the actual program where it actually registers the machine.
Are you using a mac or pc ?
does the boot version at 4:11 change after the update? cause mine freezes when I scan my nissan, when i choose nissan on the original firmware it goes to another menu showing " automatic" and manual select. on the updated firmware when i choose nissan it freezes nothin g happens.
yes, the boot version will change.
No matter what I do.. once you go to the site download.. it will not open for any reason..why must people make things so damn difficult.. any suggestion
same with me. i dont know what to do
I can get it to update on the scanner it self , what am I doing Wrong??????
Thank you very much
I downloaded the files. It was for and I get an error message on my notebook with Windows 10 "No Device Found". I never got to open up the program to even begin the process of registering or upgrading to the card. Any ideas?
Bought a Launch Creader VII tried downloading as per video on my Laptop it never downloaded. Any suggestions.
having a similar issue
I smashed mine with a sledgehammer.
@@pirihern9329 I'm about too this things a pos can't open the update file at all their software won't run
This scanner VII +2 is a nightmare! It took forever to finally load the silly thing after using three different laptops for the down load. The OEM site is Chinese and is extremely difficult to register! As an example, they ask for dealer code? Well guess what! No dealer code, no register, no download! I got the scanner on e-bay and the seller told me it was not necessary to register! It took quite a while before I was finally able to use it. I found out after the fact that it will not correct nor remove soft codes on some Fords after it was fixed! Just thought you should know!
A nightmare
I bought an x431 creaderV11×, wouldn't download, sending this crap back, Thursday. I'm going back to innova.
i had the same problem I found out how go here launchtechusa.com/ support/download CRHD update after download it will be named LaunchDIY_Update_Setup_v1.05.000
Supposed there are fakes and from what I can tell, the x431 are the international one that doesn't get supported in the US. I got the crp129 standard unit that's targeted for US markets
Autel way to go
I have tried this on my windows 10 professional pc, my windows 7 laptop, my adroid tablet. It doesn't work. I'm gonna return it.
Am agree with u dude
When u find proper method plz tell me
You can contact the seller to give remote service.
I'm having the same problem. just got my return authorization, an it's leaving here Thursday. would do it Wednesday but keeping an eye on hurricane.
Thank you for your help.
Is there a Mac update software please?
does it have dodge
Yes. Dodge is covered. Which year is your car?
Livia Tan it's an 03 Ram 1500
Chrysler all that mine has
Thanks alot for video.. u made it alot easier than that Chinese guy video.. only haters would dislike this video..
hi how did you get yours to work?
@@Mtech_Performance I went to website and did update, it took me like 30 min to figure it out. But video made it easy . It was awhile ago so I dont remember exactly, but I know once I found it on website it was easy.. finding the correct model and download is the hardest ..
Can v talk on call
Mine asked for a password?
I don't know what it is
did you get tru my devices is also asking for password
The password can be found in Help > Tool Information > Register Code.
The password is the numbers and letters to the right of where it says Register Code.
Thanks Daniel....
I did update mine but I can’t use it in my bmw 525i E60 2007 what I do????
I can't even get the exe update to open their program at all, it just installs click finish and nothin doesn't open at all zero idea what to do now this tools useless without the update.
That's what mine does. Tried to open and windows says it stopped harmful content.
@@timvest8141 my wife ended up figuring it out on her tablet not sure what she did long time ago and it works just fine now it updated properly actually pretty good unit it works very well
@@Jordan-ql6tm I just kept at it and it finally accepted my info and got it all downloaded and updated.
i just updated my Creader Vii+ tonight. It was not easy and had to go to another website for the update tool download. But once the correct software is downloaded (Windows only), the rest of the process is smooth.
hi GNW, can you share the website you used, im having trouble using the url listed in the manual
@@fsoliz3296 I am not sure if YT will let me post this link but you ultimately want to end up here:
eninfo.x431.com/products.aspx?TypeId=68&fid=t3:68:3
On the bottom left you will see 'Tool Updating Download' This is what you want. Follow the steps and you should be OK.
GNW Performance thank you I will try it!
@@gnwperformance5293 I get SITE CANNOT BE REACHED on update tool download button. I find this piss poor service obscene.
@@DIZEMANPHOTO Click on link. On bottom of page you will see pages one through six. Go to page 2. On page 2 you will see the machine Creader V11+. Click on that. Once that page down loads, you will see 'Tool Updating Download' right in the middle of the page. Try to follow the directions from there.
My asking for a pw too?????
You just use the init pW on the Tool information page Carlos
yea me to also i think we went to the wrong link to download
Ok
Helo sir
You do realize there is no support? a 4000-666-66 phone call that states unable to connect!!!
Where is your car? Why are you using this with your computer? Does it detect problems with a computer? Where is the actual instructions manual? I don't like putting Chinese anything in my computer and I don't like downloading anything. Especially Chinese stuff. I don't have a Chinese car. Diagnostics should come from the car manufacturer directly.