How To Make A Catapult/Slingshot From Birch Plywood With Flatbands
Вставка
- Опубліковано 25 сер 2024
- This is how I make my catapults from plywood. Subscribe for more videos coming in 2019!
My eBay page where I sell a variety of catapults made from all sorts of materials, ready to shoot!
www.m.ebay.co....
follow me here to see more woodworking/catapults;
bespokecatapults
beswickrobbie
![[UA] Team Vitality проти NAVI | IEM Cologne 2024](http://i.ytimg.com/vi/wttO1zVRTC0/mqdefault.jpg)
Nice work
Nice sling shot
😊😊😊😊😊
So beautiful
Wjhsiggegeyeyshjhheykgehgehy
Nice slingshot👌👌👍👍
Very nice and hard job!
thankyou
Nice job!
руки оторвать за такую работу
Nice
Very good
🎩chapeau 👍😉
Nice
What size router bit a cove bit
Nice job! What brand of scroll saw you got there? It seemed to do a good job. Nice shooting as well. Something I recently found out if you sprinkle a little baking soda on super glue it accelerates the cure time real fast.
ForkshooterTB it’s a record power scroll saw, thanks and thanks for the tip!
You show us 6 minutes of sanding and 0 seconds of how you attach the rubber band and what you use?
I never thought to show that part because it’s the same for any catapult. This video shows how I make my catapult frames
Check out Gamekeeper john, catapult carnage or simple shots. Their channels have loads of imfo on band types and attachment methods. Hope that's helpful .
Dolko71 because its not the point of the video
what rubber you use where you can buy
Beautiful sling shot what size cove bit do you use
For the round over its 1/8 inch but I now use 1/4 inch and for the band grooves it’s 4mm
নাইস
Pregunto si esta tira chinas, ó cauchera, es una invención Palestina? Han dejado de usar las hondas?
Can i use hand tools to like a file and rasp?
Yes
@@RobbieBeswick thanks
What are the names of all the sanding tools you used?
i used a sanding drum on the drill press and at the end i used a dremel
Are you not selling anything on your ebay page anymore?
👍👍👍👍👍👍👏👏👏👏👏👏
Hey do you have the template for this type of frame?
ink_noob_504 no unfortunately I don’t have the template anymore because it’s a really old design
Vsiiii
What tool do you cut the template out with
Rookie boiii the template is printed from my computer and the wood is cut on a scroll saw
What number of sandpaper
180 grit
@@RobbieBeswick thanks
What is that wood?
birch plywood
Robbie Beswick poplar
मुजे भी गीलोल एेसी मगवानी हे किया रेट तक मिलेगी
Gỗ gì vậy
Birch plywood
Helo
How to create pfs ?
fakhri hidayat it would be the same process with a different template
@@RobbieBeswick what size for pfs in centimeters?
Why would you even want a pfs? They ain't really slingshots lol
All I have is a knife... How am I supposed to do that??
Lupul Alb try to make it using a knife, that would make an interesting video
You are going to have to borrow at least a coping saw, but a scroll saw is a lot easier even if a little expensive.
Jigsaw does the same job just takes a bit longer and a dremel basically only 2 power tools you should need
маструбация
helo
Got your fingers very close to that router bit, so close it made me cringe.
Ray Tillman I’ve been doing this 5 years and never got injured
Slingshot competition ua-cam.com/video/3IQ2jQiPzBI/v-deo.html
Good job of making a simple sling shot and spending all day making it look good, nothing new except wasting time to make it,why don't you do a video of you wiping your a!*°"ss next time
You are not obliged to ‘waste’ your time watching this video