The Tippy Marble Clock - How To Assemble

You can purchase the files here:
engineezy.com/...
A clock that runs by balancing marbles on a teeter totter! Once every ten minutes, the top seesaw tips, dropping a ball onto the the 10 minutes track. Every hour, the 10 minutes track tips, dropping a ball onto the Hour track, and every 12 hours, all the tracks tip, and the clock starts from 1.
I have included the step file to help you with assembly! Feel free to make mods at your pleasure, however note the files are for personal use only.
The STL File:
Prints on all standard 3d printers, requires the following additional parts:
11 3x10x4 bearings: geni.us/ytgU1tC
M3 Screw Kit geni.us/CnX30
32 0.5in ball bearings: geni.us/uLEbw
Nema 17 Motor geni.us/IbL6D0
1 GT2 Pulley geni.us/l3MG
You will also need a way to drive the Stepper Motor:
I recommend this board: geni.us/2sH7WYY
Real Time Module (Optional): geni.us/rtKYLJT
(Here is a really good tutorial for driving clocks with a stepper motor: • Improved Clock Driver ... )
Recommended print settings:
Layer Height: 0.2mm
Nozzle: 0.4mm
Infill: 15-18%
Can print on any standard sized printer.
**All the files have been pre-oriented to save you some set up time! All you need to do is drop the parts into your slicer and hit print!

[@realgoose]

@Engineezier Thank you for this project. I am considering purchasing your plans and getting the rest of the parts in your BOM. For print quality, have you tried variable height settings in BambuStudio or OrcaSlicer? I want to think that some of the rough areas here could get smoothed out with that setting turned on.
Also, would I be able to print the tracks in TPU to quiet the marbles rolling around? Wondering if the flexibility/difference in friction may cause issues with the whole system functioning as designed.

[@christianbureau6732]

Thanks for sharing this project. Not really important but you seam to use the same White, any brand you recommend?

[@BrutusCarrol]

Great analysis, thank you! Could you help me with something unrelated: My OKX wallet holds some USDT, and I have the seed phrase. (alarm fetch churn bridge exercise tape speak race clerk couch crater letter). Could you explain how to move them to Binance?