AMAZING IDEA WITH ENGLISH KEY DIY LIFEHACKS
Вставка
- Опубліковано 11 сер 2019
- BRIGHT IDEA WITH ENGLISH KEY DIY LIFEHACKS
With a broken adjustable spanner or spanner you can recover it by doing this incredible trick and use it for different sizes of bolts and / or nuts.
SUBSCRIBE AND LIKE - Навчання та стиль
Genius. I never would have thought of making a crap shifter out of a good one???
All you need is the correct wrench!
If you have a lot of rasom
If you'd kept your crescent wrench in good repair it would have worked just as well.
What if he found it somewhere? Maybe at the scrap yard, and then he fixed it. something that was useless into a very useful tool. Then your snooty remark makes you more of an a hole, instead of a assuming hindsighted advice giver...
Сломал разводной ключ, что бы сделать разводной ключ! Гений!!!
При этом, сварка в этих местах не выдержит нагрузок на слом.
Из шпильки и гайки он сделал болт. Да парень просто гений.
Excelente más tarde iré a comprar todo lo que se ocupa, comprare:
- llave inglesa o perica.
- dos tuercas.
- una rondana o arandela.
- un tornillo o perno roscado.
- un perfil redondo liso.
Y comenzaré por desmadrar la llave inglésa o perica para combertirla en una llave inglesa casera jajajajajajja
Ah me menso
Eso es para el caso q tengas una francesa rota e irrecuperable.
Buena idea, tengo una llave tirada y ya no tiene la parte ajustable, la voy a arreglar. Buena idea.
why not save the shop time and just use the reguler cresent wrench ???
Wow you just made a crescent wrench out of a crescent wrench brilliant
สุดยอดเลยค่ะ
Herramientas + Electricidad + Perno + Tuercas + Arandela + Soldadura + Tiempo = Ir a la ferreteria y comprar una llave nueva por la mitad de toda esa basura anterior
But there will not hardness
Felicitaciones quien no tiene en su casa una llave que haya perdido el gusano. Buenísima idea congratulaciones.
Tanga mag crack lang Yung welding Nyan kapag maghihigpit kana Ng nut o di Kaya mag luwag Ng nut na kalawangin at na stuck na...nag imbento para sa views..sa susunod Yung may sense Naman..
Same idea 👍
Eso es para los que ven el video, el lo hace por visitas xD
Just buy a shifting spanner, lot easier then pulling one apart to make one,
Mereces tu like hermano .👍
Ещё один гений сломал хороший инструмент чтобы сделать его жалкое подобие....
Для того чтобы сделать хуйню,нужно сломать хорошую вещь!!!!
muantullll bangettt...hanks tutorialnnya...semoga berkah barokah tutorialnya...
Excelente idea, tengo una llave igual que se dañó, gracias..!
Excelente idea amigo. Bendiciones
Папа его наверно делал таким же путем как он сделал этот ключ
Uma chave inglesa que foi transformada em chave inglesa, excelente ideia, parabéns, vc é muito, muito criativo e extraordinário!kkk
Con sólo verlo me lo aprendí y no lo sabía
Сделаем разводной ключ из разводного ключа! Зачем????????? До этого, по моему, даже Полулях не дошел. Срочно на приём к доктору Дью!!!
А так хотел написать: сделать разводной ключ из разводного! Причем проще , надёжнее и дешевле купить нужную "головку" под классический вороток
Terimakasih tutorial nya salam dari malang
New crescent wrench $12 at harbor freight. No Welding, grinding, looking for junk parts to use. If you were gonna do all that just put a grinder to the largest open end you had there and make it fit hahah. Just messin around, I do crazy inventions all the time. Keep it up!!!
So, you turned an adjustable wrench into an adjustable wrench. Good job.
Thank you very much
Que buena idea. Excelente.
Felicitaciones.
Bro good idea new friend c,,, u.
Świetny jest to naprawdę pomysł pozdrawiam twórcę tego filmiku i tego kanału na UA-cam mile i serdecznie 👍👍👍👍
Its easier just to buy another wrench
Brillante idea
Brilliant! Now you have a wrench that will get into 1/10th as many spots as a regular crescent wrench! Just what everyone wants in there tool box
The adjustable wrench would have loosen the nut without modification waste of time
Já cheguei chegando no like sucesso
Súper genial
壊れたモンキーとナット2つ、ワッシャー、四分の寸切、溶接機
俺なら新しいモンキー買いに行くわ
間違いない(笑)
使い勝手も悪そう
モノを大切に使い続ける精神は素晴らしいと思う
でも俺なら即モノタロウポチーだわ…
@@user-se9tf2wt5q 完成までの材料、手間を考えたら新しいの買うよねw
Aaa te entendi perfecto 👍
First why make a bolt? Then why not just get a new Cresent wrench?
krenn bosss..👍👍
Muy bueno 👍
Waooo...amasing 😁👍👍👍
Que gran idea guaoooooo los extraterrestre se lo pueden llevar
Exelente👍
Muito bom vídeo
Ótima ideia
Чем глупее тема, тем больше просмотров.
\
Muito bom 👏👏👏👏
ynose(
Muito bom ? Oque? O cara fez uma gambiarra parecendo uma chave inglesa , tnc
Wow making an adjustable out of an adjustable. just bloody amazing
Mui buena la idea
How about just using a complete adjustable wrench ???
This is only practical in communist countries when you break the only crescent wrench in the village and can't get a new one, for some reason.
For real
Tenho uma dessas quebrada aqui. Só me falta a maq. De solda
A chave inglesa que virou uma chave inglesa, porém menor. Quanta criatividade.
para eso usa la herramienta en su originalidad cual es la diferencia ?????
mmm la diferencia es q si tienes una llave ROTA como la del video, en vez de tirarla, la puedes volver a usar.
Simplemente es una idea
Se venden completas también!
Muito bom valeu gostei muito obrigado!
Essa foi boa aproveito qualquer dia Fasso uma
Boa ideia gostei.
En máxima tensión. Creo que dañaría la cabeza de las tuercas y las soldaduras del implementó, se fracturarian.
Super bro
Boa idéia! Daria para deixar uma abertura maior, fixando o conjunto um pouco mais na extremidade da chave inglesa. Parabéns! Um abraço! 👍👍👏👏🇧🇷
A solution to a problem that doesn't exist
Good idea
Ok 👌 me gusta tu idea
Exelente En cuanto sale y para que se puede usar.una pregunta podrá haser una orma para cslzado ..
Nice video
Eso quedó calida
Just use the right size spanner rather than try 3 wrong ones.
Gostei muito
I finally get it! Even if it's clearly a waste of time, the responses, even if they're negative, still sell ad time.
Me gustó eso
What is the opposite of an amazing idea? This. This is.
Y como cuanto costará la máquina de soldar
Gênio tranquilamente um gênio transformando uma chave e chave
Hola, desearía saber de cuanto es el diámetro de cada cosa que utilizaste, tuerca, perno, anillo y el espacio donde mides con el metro para poner un pequeño fierro y de cuanto es el fierro donde va en el pequeño espacio donde me diste con el metro
Bon courrage
hola amigo una pregunta el maneral del estilson es de acero forjado por que si es de fierro colado desculpa pero la soldadura no entra en el fierro colado esta herramienta la elabore ase como 3 años
Melhor que a própria chave
Wow!
Nice
Não dá para comparar 3 chaves de bitola errada ao parafuso com esta ferramenta adaptada ( que claro: é sim eficiente se suportar a pressão ao apertar ou folgar o parafuso )...
Pelo menos reaproveitou uma ferramenta danificada.( E por isso: parabéns pelo fato de não ter jogado ela no lixo)
Aunque fuera para recuperar una llave inglesa, el poner una tuerca quita demasiado espacio a la apertura. Es mejor solo soldar una roldana gruesa solo para evitar que el tornillo salga
А я знаю, как переделать вилку для поедания супа!!! Это, вообще, гениальное откровение для тех, кому нравятся подобные каналы..🤣
Ok, triệu like
So, instead of going out and buying a 17 or 18 mmmm wrench that I need I'm to go out and buy an arc welder, yeah okay
Not only that, but lets take the bottom jaw off the crescent wrench only to make a shittier fabricated jaw from tools and materials most people probably don't have. Brilliant👍
Thanks boro
Mi hermano la idea esta bien lo único malo que quedo un poco chica debiste aser la mas grande
Amazing
i have a full set of wrenches so thanks anyway..lol
Golden Rule I've learnt many times: I you don't have the right tool don't even start with McGuyver shit.
Makasih tutorialnya
Pues es solo para una emergencia ya que no tiene la resistencia que una perica tendrias que estar soldando constante mente, para mi no es una genial pero es buena
Seria uma ideia genial se a chave inglesa não servisse justamente pra isso kkkkk
Tooop viu, curti demais
Buena Imaginación del autor.👍
Good idea axle but was already loose
Mantap bang Salam sukses
Fvnhb n hoki bxm, C
Não aumenta em nada essa idéia dispersa atoa
Essas ideias assim pratica para facilitar o nosso dia a dia parabéns
All that when u couldn if just used that same rench that u welded that on to ,wow
Must've spent more time looking for the parts rather than just using the adjustable wrench.
Con esa llave que hicistes que apriete le podrás dar a una tuerca o tornillo?????
Hay đấy 👍👍
Muy buena idea tengo una llave con ese problema mañana lo pongo en practica grasias
Trabajaba en un almacén de arrendamiento para FCA, duro 2 años por que los mugres técnicos nunca utilizan las herramientas que son para los modelos de carros correctos..... Ojala y en mexico existiera mas obligación por parte de las agencias en dar el servicio técnico con la herramienta adecuada
Or you could go to Harbor Freight and get a 12" Pittsburgh open end wrench for $4.99 with this month's add.
Yep. A lot of time wasted and still a wrong tool.
Me imagino que el título del vídeo es: como recuperar la funcionalidad de la llave inglesa cuando el regulador se daña( que Claro! pasa en muchas ocasiones ☺️)