Replacing the water valve on a Kenmore washing machine.

*Replacing a Washing Machine Water Inlet Valve*
1. *Gather necessary tools and materials:* Adjustable wrench, pliers, new water inlet valve, bucket or towels, and a flashlight (optional).
2. *Turn off water supply:* Locate the water supply valves behind the washing machine and turn them clockwise to close.
3. *Disconnect hoses:* Use an adjustable wrench or pliers to loosen the nuts connecting the water hoses to the inlet valve. Have a bucket or towels ready to catch any water that may leak out.
4. *Remove the old valve:* Using a wrench or pliers, unscrew the mounting nuts holding the old water inlet valve in place. Gently pull the valve out.
5. *Install the new valve:* Insert the new water inlet valve into its designated spot. Secure it with the mounting nuts, tightening them securely. Reconnect the water hoses by hand-tightening the nuts.
6. *Turn on water supply:* Slowly turn the water supply valves counterclockwise to open. Check for any leaks around the new valve or connections. If any leaks occur, tighten the nuts further.
7. *Run a test cycle:* Start a short wash cycle to ensure the new water inlet valve is functioning properly. Observe for any leaks or unusual noises.
*Tips:*
* If you're having trouble locating the water supply valves, refer to your washing machine's user manual.
* Use a flashlight to better illuminate the work area behind the washing machine.
* If the new water inlet valve still leaks after tightening the nuts, you may need to replace the O-rings or washers.