I have the same lights but I’m not getting as much ground as yours. I mounted the same spots you got. But maybe it’s 2022 seat on the Grom sitting a lil flatter than the 2018. Blue lights on yellow Grom.
I have questions... I have three wires 1 for the negative 1 for the position and 1 for the brake light. Do you now the location on where to attach the brake light wire...I need help 😢 and thx
For the underglow you wont need any relay my friend, Just mount the pods and run the wires to a two pole switch and run it over to the battery.. The rock leds pull such low current a relay isnt needed. just do a good job insulating your connectors and you are good to go bro - Joey
Awesome video! Got me thinking about something similar! I did have a question as far as lighting, I have a 6 inch led bar I’m trying to wire in. What’s the best option to wire that in, what would you tap into for that? I have a handlebar switch I am wanting to use, is that something I could run directly to the battery? Any feedback would be appreciated! I’ll probably do this rock light mod too!! Awesome!
Hey bro. the 6 inch LED bar im not sure what kind of light it will throw. The Rock pods fit anywhere and i use dual lock tape with no drilling holes. easy to reverse if i decide to sell the bike.. I run the light directly to battery with a 2 way switch spliced into the power line. Mount the switch where ever you like .. I just added Magenta Purple to my Suzuki Burgman Scooter and BAM! that is a blast to ride at night Out on the Las Vegas Strip! - Thanks for watching ( Joey)
Hey Joey, what to do mean you tapped into the tail light? I understand when the light comes on the switch gets power. When the toggle is off does the taillight now not turn on? If you understand what I mean.
Ok what i did was my rear lights are tapped into the back lights. easy to access the wires, the plastic panel under the lights pull right off;. they come on anytime the bike is running.. my front lights are on a toggle switch with wires going straight to the battery.. I only use them at night
If you wired it up without a switch then it will stay on and never go off thus killing your battery.. All you need to do is buy a toggle switch with 2 poles and run it either on the positive or neg wire to the battery.. Lights will only get power if you flip the switch... but you have to remember to flip the switch back off but thats easy because when you get off your bike at night you can see the lights glowing.. my video shows where the switch was mounted.. it was pretty easy.. like 15-20 min to do
Great idea! I’m going to try these on my custom stretch Ruckus. What size wire did you use? I don’t see this listed on the lights available. Don’t worry, I won’t hold you accountable.
I did this on my MSX here in Bangkok....talk about a big difference in visibility to other motorists on the road!
did you use ROCK LIGHTS? - Im from Thailand man! - Sweeeet! Bangkok in the house!
@@VegasDtech yes I did.......
Just ordered these lights for my Grom as well can’t wait to install. I know it’s simple but I always over think wiring i don’t know why.
Nice mod, Joey. Now all you need is a dual tone air horn for those who don’t see you in the daytime! Keep Riding!
haha have you heard those air horns that sound like freight trains? that would be nuts! Lol
I took your advice and put some rock lights on my Grom, man I love them. Thanks 🙏🏾 bro.
The Rock Lights are Dope man! I got em on all my bikes Now! "Cheap, easy to install and BRIGHT!
THIS IS LEGIT
DEFINITELY BUYING NOW
Looks great man! Mine are coming in the mail. Just subscribed, love your videos.
Hey thanks brother! I appreciate you subscribing.. more videos to come - Joey
Thanks for the video I JUST added some of these lights into my Amazon cart🛒
Oh yeah? Rock Lights brother! The only way i go..
Thank you
I have the same lights but I’m not getting as much ground as yours. I mounted the same spots you got. But maybe it’s 2022 seat on the Grom sitting a lil flatter than the 2018. Blue lights on yellow Grom.
Do you have a link for the lights and mounting velcro tape you used? LED's look awesome!:)
for the lights ebay is your friend!
@@irongoatrocky2343 Was hoping for the exact link he used, my experience is not all LED's are made equal.
I have questions... I have three wires 1 for the negative 1 for the position and 1 for the brake light. Do you now the location on where to attach the brake light wire...I need help 😢 and thx
Joe awesome setup I love thank you
Your welcome brother.. The rock lights are "Cheap and bright as Hell!"
That's awesome work. I want this same setup. I have the OG 1st generation Grom; will I need a relay or something since I don't have the LED headlight?
For the underglow you wont need any relay my friend, Just mount the pods and run the wires to a two pole switch and run it over to the battery.. The rock leds pull such low current a relay isnt needed. just do a good job insulating your connectors and you are good to go bro - Joey
Awesome video! Got me thinking about something similar! I did have a question as far as lighting, I have a 6 inch led bar I’m trying to wire in. What’s the best option to wire that in, what would you tap into for that? I have a handlebar switch I am wanting to use, is that something I could run directly to the battery? Any feedback would be appreciated! I’ll probably do this rock light mod too!! Awesome!
Hey bro. the 6 inch LED bar im not sure what kind of light it will throw. The Rock pods fit anywhere and i use dual lock tape with no drilling holes. easy to reverse if i decide to sell the bike.. I run the light directly to battery with a 2 way switch spliced into the power line. Mount the switch where ever you like .. I just added Magenta Purple to my Suzuki Burgman Scooter and BAM! that is a blast to ride at night Out on the Las Vegas Strip! - Thanks for watching ( Joey)
Oh hey Corey you are my 600 Sucbscriber!!! THANK YOU SO MUCH!
Awesome thanks for the quick response!! No problem, keep up the quality and informative videos man!!
How did splice into tail lamp power ?
nice & clean 😎👍🏾
Hy do you havé thé lins for all staf ?
I’m trying to add these rock lights to my electric moped . Do I need to use the converter ?
Hey Joey, what to do mean you tapped into the tail light? I understand when the light comes on the switch gets power.
When the toggle is off does the taillight now not turn on? If you understand what I mean.
Ok what i did was my rear lights are tapped into the back lights. easy to access the wires, the plastic panel under the lights pull right off;. they come on anytime the bike is running.. my front lights are on a toggle switch with wires going straight to the battery.. I only use them at night
did you have to drill a hole to get the toggle switch through
What color was a wire you tapped into to get it to the tail light
Sick
I added rock lights without a switch and it drained my battery. Can u provide a wiring map and the switch u used so I can do the set up u did?
If you wired it up without a switch then it will stay on and never go off thus killing your battery.. All you need to do is buy a toggle switch with 2 poles and run it either on the positive or neg wire to the battery.. Lights will only get power if you flip the switch... but you have to remember to flip the switch back off but thats easy because when you get off your bike at night you can see the lights glowing.. my video shows where the switch was mounted.. it was pretty easy.. like 15-20 min to do
Not sure if anyone asked this, but what type, and where did you get the toggle switch?
O'reilly or Autozone - Plastic $5 switch is fine for this LED mod..
Where can you buy these at
Very cool.. Now if someone does not see you riding at night they should not even have their License..
maybe i should wear a lime green clown suit!
@@VegasDtech That would Be funny..
Where can I get those pods?
ebay has tons $20 .. just type LED ROCK lights
is it just one color??
Yeah no remote control no ipone app .. you pick a color and thats that but many colors available
Vegas Dtech ok thanks
What color are they ?
magenta.. hot pink?
I ordered the blue ones match the color of my 2022 Grom!
Great idea! I’m going to try these on my custom stretch Ruckus. What size wire did you use? I don’t see this listed on the lights available. Don’t worry, I won’t hold you accountable.