How to Easily Sharpen Drill Bits
Вставка
- Опубліковано 1 жов 2024
- This is a quick and easy way to properly sharpen a drill bit. In this video a simple drill bit sharpening jig is made which makes drill bit sharpening procedure simple and easy. Quick and accurate drill bits sharpening can be done with this simple jig.
![6 Practical Drill bit Sharpening Hacks !!! [Subtitle]](http://i.ytimg.com/vi/dpPmYYexQJ8/mqdefault.jpg)
He is leaving it on the grinder for to long and he never quenches the bit from all I have heard that is a big no no
Plus you should not use the side of the grinding wheel
Really, although you are one very creative, toughtful mecanicien and woodworker, I wish to remind you that grinding on the side of the wheel might be very dangerous and results in its explosion. You could very well use the same principal on the outside rotary surface. This is said out of respect... just suscribed after seing your video about your sharpening guide. Kudos
Exactly. You will also get better quality.
Эрундой занимаешься мужик
Good idea, poor execution...
You most likely ruined the temper.
ALWAYS, ALWAYS, ALWAYS ((🥾🥾stomps foot, lights match🔥🔥)) only contact with the grinding wheel 2-3s then dip in water for a second or two, ten repeat. It will help keep the drill cool. If you heat It passed a certain point you could run the temper (make the steel soft). Soft MIGHT drill thru wood a few times. Good luck!
I Preciate your creativity, but for me alot easier just buy online spend $2 for a drill bits sharpener adapter..
Never grid on the side of the wheel . Very dangerous
!
Why don't you drill first and then cut the 8 degree peice as per the requirement
do you really have to grind iit that long?
Excellent jig, dude! Fantastic work! 😃
Stay safe there with your family! 🖖😊
Terima kasih videonya bermanfaat dan bisa ditiru (Indonesian).
Excelente amigo
Dudo mucho esa formula
Thank you very much for posting a video with tools available with common man
Idétlen megoldások tömkelegét látom furóköszörlés címén.
Bravo. Molto bene.
Very good work.
Might be fine to you, but if you took that bit to a machinist, he’d laugh at you. Just about everything you did want pass when put underneath the implements of measurement. The bit has to be raised as you push in and never twist, turn it. Buy a factory measurement tool to see if you got the right degree and both sides are equal. Try that and you’ll find out just how for off you are, night and day as many of us found out.
Muy buen proyecto