Very nice tool and giveaway!! I would use this for my job if I(Shawn) won!! Please put us in the drawing!! We are a family channel who enjoys mostly the outdoors, but also DIY projects, tool videos, mechanic videos, etc and we post outdoors type of videos have thought about doing DIY videos and tool videos on the channel, but haveent yet, anyways we gave you a sub!! Thanks for the opportunity!! Goodluck to all!! ~The Murphy Family~ (Shawn and Jessie Murphy)
I struggled as well with 26#, was able to make a makeshift compressor using an old clamp and a piece of pvc pipe i cut slits in. It worked at that point but definitely rather use the right compressor.
Great video! Awesome tool! Awesome give! This would come in real handy for small engine builders. If we are picked give to another contestant. Thank You as always!
Thanks for sharing this video with us!! Edit: by the way thanks for the opportunity to enter. I get in a hurry to post a comment after the video and don't finish typing everything.🤣
Thanks for showing that nice tool! I could have used it today but instead I fought with the old school style doing a Kohler Command series..... hopefully NO MORE!!
I'm actually grateful to you for showing this tool and how to use it. I've been wanting to upgrade my engine with a better Cam but I haven't done it cause they all require 37 LB Springs or higher and I know once I pop off the 26 LB Springs I have on there now I'll never be able to get the bigger springs on. My thumbs could barely get the 22 LB Springs on lol. This tool would make the upgrade possibilities endless for me. Thanks for the info ! :)
They say that you had to stop hitch hiking for safety but really it was the tool company that wanted to weakin your thumbs from pressing in them valve spring 🤣
Thanks Robert. This channel is more of a hobby than anything else, I'm retired so it's not about making a living. If guys buy anything thru the links in the descriptions of my videos, I give that percentage from the affiliate link back to the Subscribers in the form of a tool that can be used for engine building. (once there's enough to actually buy a tool that is. I think I had to come out of pocket just a few bucks for this one.)
im getting a acdelco digital torque wrench to take my gov out my ducar the push rod was off its rocker lol i just poped it back in its running fine again thank god
@@KentuckyFriedFixes yes just looking for a 5/8 x 11 axle bolt really hard to find i have to return 2 they both are too short one from bmi karts and the other from ebay
I've noticed a lot of axles now are actually metric sizes. You may have to measure the ID on your bearings to know what you have. Surplus Center has long 5/8 keyed axle shaft. You'll have to cut those to length though and either thread the end or use a lock collar from Tractor Supply.
Welcome Tony! I'll do the random comment select program to determine the winning comment early Saturday morning in case there's any last minute entries and post the video of the winner then. It's much easier/fairer when the computer does the picking instead of the human. Good Luck and Thanks!
Hell yeah! I been subscribed my brother!! P.s. If you happen to have any extra WildCat piston kits laying around, I'd be ecstatic to buy it from you? Thanks for the videos and a chance to win a tool, that's very generous of you!!
EC usually has them. I've bought some from Turk Brothers too. I haven't ordered any this month so I don't know who has stock and who doesn't. I know it's frustrating trying to get parts in this day and age! Seems like their favorite words are "On Backorder".
@@KentuckyFriedFixes i know i have to take off my pimp wheels and get some more aggressive ones when im done this will be a 20k dollar motovox lmao here take some more tires here want this seat too lol i got so much stufff for this bike its sickening lmao
Do you know of anyone who works on atv,. A buddy of mine went through a nasty divorce and is giving me a Yamaha grizzly 660 and I know it gonna need a battery and tires and I'm sure gas and oil and plugs
Hi David! There's a couple of ATV repair shops in Munfordville KY but I don't know the owners. They've been in business several years though so they must be doing something right. Hope This helps.
Thank you Sir! Sorry its been awhile. I would've had Part 2 up 3 weeks ago but I had to order new rod bolts twice! This time of year seems like it always gets busy trying to get all the home repair junk done before cold weather sets in. I appreciate you my friend!
Kentucky Fried Fixes.. Awesome giveaway!! Thanks for the opportunity.
You're welcome my friend. Good luck!
Looks like a neat tool would definitely come in handy one I start or build these engines a little more! Thanks for sharing!
Thanks for watching!
That's a nice valve spring compressor Chris. Thanks for the video 🔧👍
I appreciate you! Thanks for watching!
Wow, that is a great spring compressor !!! Amazing giveaway, count me in !!! Cheers
Welcome!
Very nice tool and giveaway!! I would use this for my job if I(Shawn) won!! Please put us in the drawing!! We are a family channel who enjoys mostly the outdoors, but also DIY projects, tool videos, mechanic videos, etc and we post outdoors type of videos have thought about doing DIY videos and tool videos on the channel, but haveent yet, anyways we gave you a sub!! Thanks for the opportunity!! Goodluck to all!!
~The Murphy Family~
(Shawn and Jessie Murphy)
Luck of the draw! Thanks!
@@KentuckyFriedFixes Thank you so much!! You're welcome and thank you for subscribing to our channel!! Means alot!!
I struggled as well with 26#, was able to make a makeshift compressor using an old clamp and a piece of pvc pipe i cut slits in. It worked at that point but definitely rather use the right compressor.
Those 26 # springs are tough on the thumbs! Thanks Greg!
Very nice tool and giveaway. I appreciate the chance to get entered in!!
Thanks OGG!
Very simple, but very effective , nice tool nice presentation, thanks
Thanks Bill! Good luck!
Great video! Awesome tool! Awesome give! This would come in real handy for small engine builders. If we are picked give to another contestant. Thank You as always!
Thanks Frank will do my friend!
Very nice tool. I wouldn't mind being entered into your giveaway. Thank you.
Yes Sir! Welcome!
that's a handy gadget, I can't say I ever saw one of those. I've had a couple of the C shape clamps for car valve springs though.
Kind of a weird design tool but they work good! Thanks!
Thanks for sharing this video with us!!
Edit: by the way thanks for the opportunity to enter. I get in a hurry to post a comment after the video and don't finish typing everything.🤣
Welcome! Good luck!
Great video Sir! I look forward to seeing yet another one from you. Keep up the awesome work Brother!
Thanks LMD! I appreciate you! Good luck!
Thanks for doing the giveaway, great channel. 👊🏼
You're welcome Oggie! Good luck!
Thanks for showing that nice tool! I could have used it today but instead I fought with the old school style doing a Kohler Command series..... hopefully NO MORE!!
Thanks Don!
I'm actually grateful to you for showing this tool and how to use it. I've been wanting to upgrade my engine with a better Cam but I haven't done it cause they all require 37 LB Springs or higher and I know once I pop off the 26 LB Springs I have on there now I'll never be able to get the bigger springs on. My thumbs could barely get the 22 LB Springs on lol. This tool would make the upgrade possibilities endless for me. Thanks for the info ! :)
A VS compressor sure makes life easier! Thanks JNC!
nice tool.. put me in the draw, thanks for the great vids
Thanks Shawn!
Mine came in a blue box, they work great! Even the 18 lbs springs are doable but this thing makes it easy aside from fumbling with the keepers.
I think they're the same tool just different color boxes. I love Red! Thanks Frosty!
Those are really nice compressors. I have one just like it.
They're kinda odd looking and different than the others but they get the job done! Thanks Ed!
Love the channel!! Especially the Ducar 212 stuff!
Thanks Jay Dee! I appreciate you!
Dang, I thought you disappeared. Glad to see you're back!
Thanks Ryan! Had a little down time but back at it again! I appreciate you my friend.
They say that you had to stop hitch hiking for safety but really it was the tool company that wanted to weakin your thumbs from pressing in them valve spring 🤣
LOL HP! Big RPM springs require BIG thumbs! No more!
@@KentuckyFriedFixes lmao
Very nice of you to do that!
😇🙏👍
Thanks Robert. This channel is more of a hobby than anything else, I'm retired so it's not about making a living. If guys buy anything thru the links in the descriptions of my videos, I give that percentage from the affiliate link back to the Subscribers in the form of a tool that can be used for engine building. (once there's enough to actually buy a tool that is. I think I had to come out of pocket just a few bucks for this one.)
Thanks bud. Great vids . appreciate ya channel
I appreciate you HR!
Another awesome video as always. Thanks
Thanks Brian! Good luck my friend!
Nice tool ,,,,,,,,
Thanks Greg!
im getting a acdelco digital torque wrench to take my gov out my ducar the push rod was off its rocker lol i just poped it back in its running fine again thank god
Good deal! It's always great when it turns out to be something simple!
@@KentuckyFriedFixes yes just looking for a 5/8 x 11 axle bolt really hard to find i have to return 2 they both are too short one from bmi karts and the other from ebay
I've noticed a lot of axles now are actually metric sizes. You may have to measure the ID on your bearings to know what you have. Surplus Center has long 5/8 keyed axle shaft. You'll have to cut those to length though and either thread the end or use a lock collar from Tractor Supply.
@@KentuckyFriedFixes yea i just ordered a chrome dipped one from bolts r us and a galvanised steel dipped one ooooh hot metal
My son would and could use this. So here is my comment and maybe I can be lucky and win it for him. Nice video
Thanks! Good luck!
that's a lot more sophisticated than what I use on my K series Kohlers, mine looks like bbq thongs, haha
Hi D C! Looks weird but works good on the OHV stuff. Thanks!
New subscriber, nice video. If I was to win this I would probably give it to my son in law. I know he would put it to good use and could use it.
Welcome Tony! I'll do the random comment select program to determine the winning comment early Saturday morning in case there's any last minute entries and post the video of the winner then. It's much easier/fairer when the computer does the picking instead of the human. Good Luck and Thanks!
@@KentuckyFriedFixes Thank you, that sounds good. I wish everyone luck, may the one who the computer wants to win come out with the win lol
@@KentuckyFriedFixes and you're welcome and thank you
Hell yeah! I been subscribed my brother!! P.s. If you happen to have any extra WildCat piston kits laying around, I'd be ecstatic to buy it from you? Thanks for the videos and a chance to win a tool, that's very generous of you!!
Thanks J! I'm running short on WC pistons! Every time I order one an engine build shows up!
@@KentuckyFriedFixes I can't find them? Nothing really comes up when I search on Google other than EC Carbs?
EC usually has them. I've bought some from Turk Brothers too. I haven't ordered any this month so I don't know who has stock and who doesn't. I know it's frustrating trying to get parts in this day and age! Seems like their favorite words are "On Backorder".
@@KentuckyFriedFixes Thank you sir, can't wait for your next upload!
i just did mine with two popcicle sticks and some ductape
LOL! Hang in there Cruizer! More giveaways coming! This Winter is gonna be fun!
@@KentuckyFriedFixes i know i have to take off my pimp wheels and get some more aggressive ones when im done this will be a 20k dollar motovox lmao here take some more tires here want this seat too lol i got so much stufff for this bike its sickening lmao
i like that i work on a lot of them
Good luck Greg!
Cool tool
Thanks Steve!
👍
Thanks Rawb! I appreciate you!
My thumbs aren’t able to keep up with my desire for RPMs!
LOL Thomas! I know what you mean!
did hurricane ian blow you in to a new shop
Hi Kevin! It's the same shop just a crappier work table on the opposite end of where I normally record videos. I appreciate you!
@@KentuckyFriedFixes is it as crappier as the😄 motor start up table i was hoping it blow away
@@Deans64 LOL Kevin! The first start up table was a definite wobbly disaster!
Watch the video... Check! Subscribe....... Check! Leave a comment...... Check!! Alright maybe I'll win.
First rate job! Thanks Khris!
Do you know of anyone who works on atv,. A buddy of mine went through a nasty divorce and is giving me a Yamaha grizzly 660 and I know it gonna need a battery and tires and I'm sure gas and oil and plugs
Hi David! There's a couple of ATV repair shops in Munfordville KY but I don't know the owners. They've been in business several years though so they must be doing something right. Hope This helps.
I was getting worried about you. Haven't made a video in a month, ain't heard hide nor hair. You been chasing Bigfoot?
Thank you Sir! Sorry its been awhile. I would've had Part 2 up 3 weeks ago but I had to order new rod bolts twice! This time of year seems like it always gets busy trying to get all the home repair junk done before cold weather sets in. I appreciate you my friend!
@@KentuckyFriedFixes ❤️❤️❤️❤️