Anycubic Photon Mono Review: 1 Major Design Flaw
Вставка
- Опубліковано 13 січ 2021
- I really like this printer, but I want to love it.
Amazon affiliate links below:
Anycubic Photon Mono: amzn.to/2KgPSUT
Anycubic Gray Resin: amzn.to/3oLJW5c
Sovol Resin Vat: amzn.to/38MacXI
Silicone Slap Mat: amzn.to/3oRGjLe
Pickle Container (for washing prints): amzn.to/3ig6Y1r
UV Curing Light and Rotating Platform: amzn.to/3yDlue4
Foil Tape: amzn.to/3su0nVS
Instagram: / thomaslightle
Facebook: / redbarnwoodworking
Twitter: / tnlightle - Навчання та стиль
What is the reason the plastic tray is bad? I am brand new to this so sorry if it is a silly question. What is the FEP??
The FEP is the clear plastic film that is at the bottom of the resin tray. The image is projected onto the FEP and the resin cures to both the build plate and the film. The cured resin then peels away from the FEP when the build plate lifts between each layer. In order to work properly, the FEP needs to be under a certain amount of tension, like the surface of a drum. The thinking here is that a plastic tray won’t last as long or is possibly not as strong as an aluminum one. For me it is just a sign that the company is cutting corners for profit. Especially when there are better all-metal printers out there that cost less. Look up my review of the Voxelab Proxima and you will see how a printer can be well-built with quality materials and also be the most affordable in its class. Thanks for the question and happy printing!
@@SouthpawWorkshop Hi, i am also a new to 3d printer, and am considering to buy one, is this issues cause a problem to print? or it is more about long term use?
Thank you.
Don’t get me wrong, the Photon Mono is a great printer, especially for beginners. My gripe is around design decisions like the plastic construction and the proprietary FEP replacements. I usually suggest the Voxelab Proxima for beginners because of its superior build quality, low price and high print success rate.
@@SouthpawWorkshop would yiu say it’s better than this printer for beginners?
Probably better in the way that the Proxima came with a spare FEP and higher quality tools like the scraper and spatula. The fact that is cheaper helps also.
I've been looking to finally invest in a resin printer now that my stim check has arrived and I'm so relieved I found this and you mentioned the vat! Saving this for later so I can get that, thank you for this.
Thanks mate, truly. Hard to find reviews that aren't suspiciously...incentivised.
I really hope you can tell the difference between a review and a product sent ad lmao, they literally tell you in review videos if they were given by the company lol
@@Aeaaoooaaa Not always. It's common on youtube to review an item that a company gave you. Hence why some channels are more legit than others, Project Farm, to name one of the best ones. They buy the products themselves and review them.
I really like how easy to understand this video was. You used as little jargon as possible and the content was relevant to my basic knowledge of the subject. Thanks for investing the time in this.
Thanks for watching and your nice comment!
Just got this yesterday as my first 3D printer. My first few prints failed because I hadn't adjusted the level correctly, but once I got that issue resolved my next print came out amazing! I am glad I watched this video though, because I wasn't aware of the FEP issue. Might have to do the same thing you did when the time comes.
It’s a great printer. Have fun!
Quality review. I appreciate the way you approached it
Thanks for watching!
Thank you so much for your review and tips! I’m new to 3D printing and trying to educate myself to the hobby. This is helping a lot in making an informed decision about purchasing the Anycubic. Thank you so much, not all heroes wear a cape, unless it’s 3D printed in this hobby lol.
Glad my video was helpful. Cheers!
Same.
Got one of these for Christmas and this video was so helpful. Thank you. Merry Christmas.
I'm interested on buying the Photon Mono to start on the 3D printing world, I had watch some reviews and so far yours was awesome, you clarified doubts and encourage me to move on purchasing this model, thank you! I hope you answer future questions that I may have when I start with this project. Salutes from Honduras.
Saludos amigo!
Just got mine for my birthday as a gift from my husband. Waiting on the test print to finish now. Will definitely get the replacement vat so I have something on hand, but for now the plastic one will do.
Thank you for showing what comes in the Tool set! This is what I've been searching for!
Glad I could help!
This is a great video. Thank you so much for the time you took to make it. Will definitely be using your affiliate link, and look forward to seeing more of your videos.
Thanks!
I've been looking into starting 3D printing and this model keeps popping up. Thanks to your review I believe this is the best choice for me. Thank you for helping me decide
Thanks for watching!
Hey thanks for this great information. If been pondering on getting this exact same 3d printer for small miniatures and accessories for dioramas and such. You are the first one out of all of the videos I've watched in my research that mentioned the issue about the plastic vat and the fact that their is a third party replacement for it. When im ready to buy this 3d pinter ill make sure I use your links to support you 👍.
Thanks! I really appreciate it.
Thank you! This is exactly the type of honest review I was looking for.
Thanks for watching!
Thanks for your review, I'm doing my first print of the test cube right now on my new Mono, looks like its printing fine, I got the Wash and Cure station by Anycubic as well as I'm needing all the help I can get with keeping the kitchen clean! Started off with Anycubic Translucent Green and peeping through the gap between the vat and the bad its looking gerat
Exciting stuff. Performance-wise, my photon mono has been rock solid.
I've just bought 1 and I'm happy to see that is a good machine. For 180€ I can't ask for more of a printer. Great review
Just got mine today. Did you put a protection the polarized screen or just used stock?
I use stock with no issues. Just keep an eye on your FEP. I have heard of others using screen protectors to protect from spills.
Ordered mine today. Along wiht that Resin Vat. Thanks.
Great review, However people keep mistaking exposure time for layer time which is incorrect... Exposure might be 1.5s, but there are extra seconds for Z axis movement. I think the Mono is actually advertised at 30mm per hour which at a default layer height of 0.05mm is 6 seconds per layer, which in my tests is pretty acurate. I have not had to replace my FEP yet and the unit is now 6 months old. I might look into the replacement Metal Vat when I need to replace the FEP. For me, although the base is plastic, it doesn't feel cheap, and helps reduce the weight, which also help with shipping costs, but it doesn't seem to have made the product less sturdy. Overall I really like this printer and have just recently upgraded to the Mono X 4K with the Wash and Cure Plus.
Is it worth to get this or should I go epax ?
How do you get 30mm/hour as it took me almost 6 hours at 2.0 sec exposure?
Nice UV box idea..been totally busy lately..
Love the reviews..i will for sure contact you this weekend..
I got at least 80 prints out of that plastic vat + FEP, then it got a nasty bump after it stuck to the build plate and I was afraid to push it further. Switched to the 3rd party metal vat now.
@Ioan Croitor Fine, but changing the FEP is a hassle. Was able to buy more Anycubic FEPs that are already on the frame and they have been working ideally.
Fantastic honest review - thank you 😊
Thanks for watching!
I like this type of content as I'm currently looking for a 3d printer to print miniatures for D&D at home.
As mine is still in the mail, I’m super excited to finally be able to print out my dnd armies!
Awesome! Happy printing!
Thanks for the review, been looking at getting a 3D printer for a while now and this is the one I've been looking at.
You might want to wait for my next review. I found one better than the Anycubic Photon Mono. The new video should drop in the next couple days
@@SouthpawWorkshop Sweet as I got that notification bell on.
thanks for the video, its instrumental in my bying decision and you answered most questions i had
Glad to help!
Thanks for this review. Very informative. As my Anycubic Photon failed -- and I am too lazy to repair it -- the Photon Mono is looking good. Note that my current Photon was bought on eBay. Nothing more needs to be said. The Mono will be brand new.
It is a great printer with a great community behind it. Cheers!
Thanks, I was contemplating getting one
came here to check out the review of the printer, left happy there is a boston terrier in the video :D
as requested, i have hit the like button. aside from that one flaw, which you've introduced a solution to ('preciate that), sounds like this will be the 3D printer for me.
again, thanks for the info.👍
Thank you for the info this was a great vid
Thank you so much. This was really helpful.
Thanks for watching!
Dude, this thing looks cool! You might be sending me down a new rabbit hole😂😂
I need to send you some pics of the awesome stuff I have been printing with this thing. Only problem is that I don't have the time or motivation to paint these models lol
@@SouthpawWorkshop dude, I hear you on motivation
I got one of thease do you know if it works with orca slicer
Thanks for your review. I am considering buying a NOS Anycubic Mono still in the box.
It’s a good printer. Hope it works out for you. Cheers!
Im looking forward to buy one of these, i want to print my own models on my channel.
Looking at this puppy strictly for D&D figures. I'm a beginner so seems like a good starter set. How often does the FEP need to be replaced? Noob question from a noob. (and great video....well spoken and concise).
FEP can be pretty temperamental. If we’ll taken care of, it can last a long time. However, some things are just out of your control, like failed prints. Most of the time a failed print won’t negatively affect the FEP, but sometimes it does. If you buy this printer, my suggestion is to have a spare FEP handy. That way if you have a pinhole or tear, you can get back to printing right away. Having said all of that, I’m still on the original FEP that came with my Photon Mono and I have printed a lot with it. Hope that helps!
Great video. Thanks for covering this printer. New subscriber.
Thanks, and welcome!
I like the idea of a prepared FEP because but lets first establish a few points why:
* I haven't changed one before, will do it for the first time next week, looks scary xD
* price is okay where I live. I even get two for a better price than normal FEP at many other web stores but... buying regular FEP sheets from Anycubic is an even better deal.
* Free, fast shipping from Anycubic where I live
I see your point though and is a bit surprised that Anycubic hasn't solved this by simply making regular FEP frames for experiened users that want to change it all on their own or use third party FEP. Best of both worlds :)
Good point. Since this is the only printer they make that is like this, my guess is they were testing the market to see if people were willing to buy the pre-assembled frame. It is a good idea, but at the time of the review, replacements weren’t even available to buy, so many people were just buying replacement vats that took normal FEP film.
I tried changing the fep today on mine, having no idea the frame for the fep was glued together, I broke it. I wish I’d seen your video yesterday.
Luckily there are replacement options out there!
Just picked this up last night. Kind of bummed about the FEP but i'll just get the aluminum one you mentioned and problem solved.
Where did you get the upgraded part???????
Check the description for a link to the replacement resin vat.
Great video... Thx...
new to 3d printing and have yet to buy one but am i understanding it correct that
1. i need to regularly buy a new clear film for the resin vat, the fep i think?
2 i am adviced to buy the aluminium vat because it damages less quickly
3 does the lcd screen need changing aswell?
FEP film will need to be replaced eventually, but that depends on how well you take care of your film.
The Sovol vat is recommended not only because it is made of metal and higher quality than the Anycubic vat, but also because FEP replacement on it is easier and less expensive than the Anycubic method.
Your screen will also wear our eventually, but it should last hundreds to thousands of hours before needing replacement.
I just bought this printer and it's on the way to me now. I saw your suggestion of a replacement vat and I like that vat much more than what comes with it. My question however is how does it attach to the printer? The original has wings on the side of it that hold it down with the screws. When you showed putting the new vat on I saw that there were hold downs over the top of the vat, was that another accessory, was that footage from a different printer or do those hold downs come with the new vat?
The new vat I suggested works with the hold-down system of the Photon Mono. The thumbscrews stay attached to the printer and the vat usually has small indents for the ends of the screws to seat into.
how about the fumes? is there a vent on this unit? as of now, that is my main concern for this unit. Thanks!
I prefer mine without the vent. As long as the lid is on, no fumes will escape. When post processing, I wear an organic vapor mask to deal not only with the resin vapor, but also the alcohol vapors. Once the lid is back on or the resin is back in the bottle, the smell goes away rather quickly. I think the vents are a bit of a gimmick, in my opinion.
how do I go about designing my own parts, I used a 3d printer in my job 14 years ago and I used solid works to design parts, what do you use to design your own parts on this printer ??? , thanks phil
I use both sketchup and Fusion360. I’m actually transitioning from sketchup to Fision360 because I find fusion360 to be much more powerful
Any 3d printer recommendations at a slightly higher price? The Anycubic 6k looks like a really solid option, Voxelab still only sells up to a 4k screen resin printer that's actually slightly more expensive.
The 6k is definitely a great option with a larger build area!
Hi. Thanks for the video. I have two questions.
1.Can we use it for Jewellery models? Very tinny details needed...
2. Can we use 3rd party resins.
Thanks in advance!
Yes and yes
How are the fumes? Do these printers need any kind of ventilation? I've never used a Resin printer before. It looks like you're just printing in a regular room, do you just wait till it's done and then open a window or something?
The resin fumes can be a controversial topic. The only time they are a problem for me is when I am actively working with the resin such as pouring it or cleaning a print. I don’t smell it during printing or any time the lid is on the printer. Ideally, you would want to make sure the room is adequately ventilated. You definitely don’t want to keep the printer in your bedroom or another regularly-occupied area of your house.
How bad is the smell of the resin? I have family that are pretty sensitive to smell (can't walk in the garden poison/chemical section of a big box store without getting a headache).
Definitely noticeable when you are actively working with the resin, i.e. pouring it in, cleaning prints, etc. But the smell isn’t noticeable when the lid is on the printer.
Awesome video. Quick question, have you ever needed to change any default print settings such as rising speed, UV Power, etc?
Nope. Most of these printers are optimized for standard resin right out of the box. If you were using something a little more exotic like casting resin or flexible resin, you would likely need to tweak settings, but all my printers have worked perfectly out of the box with standard resin
@@SouthpawWorkshop Gotcha thanks for the response!
Hey Thomas, thanks for the video! I unboxed my printer today and tried printing the test file, but after a while, I went to check on it and noticed the cube had snapped off from the base circle and the whole thing was a waste. I'm pretty sure I did everything I was supposed to do in terms of setup (levelling, etc..) except that I had filled the resin vat at the minimum line. Do you think that was the reason or am I missing something here? I'm totally new to this and I have zero knowledge about 3D printing.
Hey Naz. This hobby can be frustrating at times, but in the end it is so rewarding! A couple things to consider: build plate level is crucial. Try leveling again with the card and make sure it doesn’t move while tightening the screws. Another big factor is the room temperature where you are printing. Every brand of resin has an optimal temperature range, but I generally try to keep my printing room above 70F. That was the biggest contributor to failed prints while I was learning. Give it another shot, don’t get discouraged! Let me know if it ends up working out. Good luck!
@@SouthpawWorkshop thanks for responding!!
I leveled it again and tightened the screws on the resin vat + added a bit more resin this time. I warmed up the resin bottle (by placing it near a heater, but not too close_ for a few minutes and I made the basement where I'm printing warmer this time.
It worked and I'm really looking forward to learning more about this hobby!
Cheers!
Great news. Have fun!
Would you recommend this to a beginner? I don't know anything about 3d printers and I'm considering this one.
This one is just as good as all the others. Check out my review of the Voxelab Proxima. It is also a great printer and it is much cheaper than the Anycubic
Hello, I would be interested in buying a 3D printer for creating miniatures, I have seen that the photon mono 4k came out and it does not differ much in price with the previous one. do you think it is a better choice? I would like your advice. thank you!!
Yes, the 4K version is looking like a great machine. I hope to get my hands on one sometime soon for a proper review. Cheers!
I saw the Mono SE has a metal vat, do you know if the fep is still proprietary?
It appears that the metal vats use the traditional method of FEP replacement, so no proprietary FEP for the mono SE. cheers!
Do you know of a good replacement vat for the Mono X printer?
There are a couple sold on Amazon. They seem pretty pricey. Another good option would be AliExpress. Either way they will ship direct from China so delivery will take some time.
Are you adjusting the printer settings like exposure at all?
I did lower the layer exposure from the default 2.5 seconds to 1.8 seconds just to see how well it performs. It worked just fine at stock settings though.
So out of curiosity, does the yellow cover on the printer help protect against toxins releasing from the print in the environment? I’m living in a small apartment and looking for something I could use while also not risking health with toxins in my small living space.
Maybe to a small degree, but without active ventilation, you will be stinking up the whole apartment every time you lift the cover.
Nice review. Trying to decide whether to spend the extra $ and get the Mono SE for the metal case.
Personally I don’t think it matters unless you plan on transporting the printer regularly. On top of that, I find the “hinged door” solution to be cumbersome and it actually interferes with your ability to work on the printer, remove a full vat of resin, etc.
@@SouthpawWorkshop Thanks. Good point on the lid.
Is it easier to replace the FEP on the new aluminum VAT?
Yes, it is just like most other vats. Steel frame with a bunch of screws
Was looking for this one or the Elegoo Marys 2 pro.Which one do u advice for a novice?Has this one an carbon filter to?
Both are great printers. The Mars 2 Pro is built better and is a more solid machine overall. I think the photon mono has some type of filtration, but it is internal and not accessible.
The sensor of the cover is to make sure the cover is on because it blocks the uv rays while printing.
It's now almost a year later. How has this printer held up? Has Anycubic changed the FEP installation or is there 3rd party FEP available that works? I see some advertised, but I don't know if it's more trouble than it's worth.
I have too many printers, so some don’t get used as much as others. I do use the Photon Mono from time to time and the original FEP has held up well, but I am extra careful and clean between uses. I can’t say I have seen any 3rd party replacement FEP for this style, but the Sovol replacement vat (which I own) is always on standby in case there is an issue. It takes standard FEP replacements and is solid aluminum with a steel retaining ring. Best part is that it doesn’t cost much more than the proprietary Anycubic FEP replacement, so for me it was a no-brainer. An added benefit is that it also fits the Elegoo Mars 2 printers, so you can interchange as needed if you have both printers like I do. Good luck in your printing pursuits!
@@SouthpawWorkshop Thank you, friend. Anycubic is running a bundle sale right now with their wash station. But you've got me thinking about the Voxelab. Anycubic does have their FEP replacements at 11.99 for 2 of them. But $20 shipping.
Hi, could you share your setting for it. I am having trouble getting the model to stick to the supports when printing.
Depends on which slicer you are using. I used the default settings from Chitubox with good results. You may want to use heavier supports if your prints are failing. Room temperature can affect print success as well. If you are printing in less than 70 degrees F, prints are more likely to fail. Hope that helps!
@@SouthpawWorkshop I just checked the light intensity and it is set to 10. What intensity are you running?
The models are pre supported from highland miniatures which normally run flawless on my photon S. For slicer I am running Lychee.
Great vid, I'm going to invest in another vat right away :)
Great!
Hi, is it normal for the FEP to stick a little every time the Z axis goes up ?. Thanks
Yes, you may hear a little “pop” every time the FEP releases from each layer. That is how you know it is still printing successfully
@@SouthpawWorkshop thx 👍
Hi, does it make significant noise while printing ? You re the only one reviewer that made an noise sample I have found so far. And the only comment about silent/loud. Thank you so much for that.
If you can compare it to the apartment noises like fridge etc... I would be extremely happy :)
Trying to decide if I must get Longer Orange30 or this Anycubic. Which one would you prefer for the same price ? Thanks !
I don’t have a Longer Orange 30, so I don’t know how noisy it is, but I can tell you it is only LCD and not Mono, so it will take longer to print when compared to the Anycubic. Also, Anycubic’s Mono screen is supposed to last longer than traditional LCD screens. Maybe something worth considering. As for the Anycubic noise: I have 4 printers and the Anycubic is the quietest of them all. It may still be louder than a fridge, but if located correctly, shouldn’t be too bad, especially if you have music or a tv on.
@@SouthpawWorkshop oh thank you again good sir. Does this Anycubic have a cooling fan that makes noise ? Or the Z-driver is the only soundmaker here ?
Anycubic does have a cooling fan but it is very quiet. The only noise you will notice is the z-motor
@@SouthpawWorkshop god bless u. I'm gonna purchase this little guy
Getting this printer soon. Anything else to lookout for?
Nothing beyond what I mentioned in the video. It’s a good little printer. I’m sure you will enjoy it.
Hello, I have a the regular Photon resin 3D printer. I’ve been able to get great prints out of it but I’m still new. Does this Mono model print faster than the photon? Is the build plate bigger? Thank you for any advice. Great video.
Yes, the mono prints faster. I think the build volume is the same, but the big selling point is faster prints and the screen is supposed to last longer. Cheers!
Thank you!
So I went with the mono SE. Do I have to adjust the settings to make it print faster than the photon? Also are the USB’s interchangeable? If I have a bunch of files on my usb for my photon can I just plug it into the SE and print those same exact files? Thanks again.
The slicing software will have a profile specifically designed for the mono SE. it will have all the correct exposure and lift/speed settings for that machine. You will need to reslice all your files because the old photon uses way different settings and the resolution is likely a little different also. Good luck!
Thanks so much for the fast reply. Really helps a lot. Have a great night!
whats the best setting for the grey resin great video
I do 2 second layer exposure.
Nice machine 👍👍👌
Been looking at thus one. Not sure if I should go with it or the Elegoo Mars 2 pro. This one is currently cheaper by about $30
You should be fine with either choice. Keep in mind that FEP replacements on the Anycubic are expensive and hard to find, so you may be better off with the Elegoo.
@@SouthpawWorkshop ended up going with Elegoo, resin also seems to be less expensive
using 3 days and the uv light not working, not sure its the uv light power supply or the uv light panel itself, using multimeter read 12v from the in or out of uv power supply and from the uv panel itself, also i noticed the heatsink of uv panel its just the bottom 3d printer plat without fins or a fan
Exposure time 8sec and bottom exposure 60s?? Am reading this right? I just printed a small piece with 2sec and 20sec respectfully (same anycubic resin). Video is very straightforward, nice
Where are you reading that? Sounds more like the settings for the original photon. I run my mono at 1.8 second layers using the Anycubic gray resin. Turns out perfect every time. Thanks for watching!
Depends on the type of resin you are using, the temperature of your printing room and how good your supports are. A big factor that people don’t realize is that resin doesn’t perform well under 70F or 20C. May be worth checking.
@@SouthpawWorkshop look at 5:43 in this video. Crazy settings for Photon Mono isn't it ?
Makes sense where he thought those settings were the suggested ones. I think I recorded that footage before I actually set up Photon Workshop for my machine. Never noticed the wrong settings before.
What would you recommend the UV power % should be for translucent resin?
Most manufacturers recommend around 50% power for transparent resin, so that would be a good starting point. Your mileage may vary.
@@SouthpawWorkshop thanks
I have not found temperature tolerance data for the grey resin. I need prints that can survive vulcanizatiin in rubber at 300 F. Can you help? Many thanks.
High temperature resin is a fairly limited market. Formlabs makes a product that can withstand up to 238C but it is pretty pricey. About $200 USD per liter. Check it out at the Formlabs.com website.
@@SouthpawWorkshop thank you. That is really the only resin that I have seen. I was thinking that there must be others, but looks like there isn't. I need to find out if that resin will work in this Anycubic Mono that you have reviewed here.
@@SouthpawWorkshop searched and read all day. Here are 2 others....
Siraya Tech Sculpt Ultra 220C $75
Loctite 3D 3860 High Heat 185 C $199
Interesting. I didn’t know Loctite even made resin. I hear nothing but good things about SirayaTech. For the price, it might be worth it to try out.
How much extra does a resin print weigh over a PLA?
Good question. I have no idea, but it would depend on how you would print either one. The amount of infill on the PLA print and whether the resin print was hollowed would have the biggest impact on the weight of each type of print.
I bought a bunch of STL files but the printer won't recognize any of them. Do I need to print the test file first?
You will need to use a slicing program such as Chitubox to convert the STL file to a format readable by your printer. Hope that helps!
@@SouthpawWorkshop I did figure outbid needed to convert them first, I just didn't know how. I was using the photon workshop and saving them as model files. I didn't realize I had to press the giant blue layered icon beneath the manipulation Keyes to save it a a Slice file. I got it figured out. Thanks you
Great! Happy printing!
I heard the software is alittle glitchy and doesn't work well. Is this true at the moment?
Chitubox or Lychee slicer both work great with this printer. I would avoid the Anycubic software.
I have one of these in the cart now, I just wanted to see an honest review first.
Do you have to put back the resin in the bottle or just leave it
I personally leave it, but it will separate in the vat, so you have to stir it before next use.
so if I buy Sovol vat I can just use any FEP film right? so problem solved :D
That is correct
@@SouthpawWorkshop thanks!
Thanks your video convinced me to go with this over the mars
Awesome!
What exactly are the advantages over the Mars 2?
Mars 2 uses an LCD screen instead of a mono screen which results in the need for longer exposure times during printing. It is also understood that LCD screens have a shorter lifespan than mono screens. Now the Mars 2 mono is a different story altogether. I think the Mars 2 mono has the advantage over the photon mono due to a better leveling system and resin vat, but I believe it costs more than the Photon mono. Hope that helps!
@@SouthpawWorkshop yup that's exactly why I picked it over the Mars. Thanks to your video :)
Cool! Glad I could help
Well, after watching this, I do not regret buying it, lol. The cyber monday deal was to good, so I bit the bullet (Bought the matching curing station with it, might have not been worth it after seeing your janky but effective curing box!) After seeing this review, I feel a lot better. Now, just have to keep waiting for it to arrive...
It’s a good printer. You won’t be disappointed. I’m kinda jealous. Even though my curing station works, it is definitely not as nice as the all-in-one units.
Will I be able to use this with a Chromebook
I don’t think chromebook is powerful enough to run the software. I believe it is Mac or PC only.
I bought one. Should I cancel and get the Proxima?
Both are equally good. If you got the 4K version of this printer, it is the better choice.
What layer speed did you use please?
Depends on what resin you are using, but anywhere between 1.8 and 2.2 seconds per layer is usually a good place to start.
Are you still using this printer and has your opinion changed? I'm thinking of getting this exact model soon. thanks!
It is a great printer for the price. You may want to consider the Voxelab Proxima. It costs less and is built better. Performs exactly as well as the Anycubic Photon Mono. You can watch my video review of it, or check it out on Amazon: amzn.to/3rNFhBs
Hey where did you purchase the aluminium vat?
Here is a link for you: amzn.to/38MacXI
I’m having hella trouble with mine, can you help ?
Tell me what you are experiencing?
New to printing here. My brother got me this printer probably about a Year ago, and I'm just now looking into what we can do with it/how to use it. ^^;
I was wondering if you can use different resins with this printer? I want different colors like Red, Purple, Yellow, and Brown. But Anycubic doesn't seem to officially have those colors. At least they have Beige.
I'm making a custom Japanese style action figure, and I probably need to 3D print the joints, instead of resin casting it. (although if I have to, I will do that too)
Thank you for making this review btw. I'm happy to see it prints fairly well! :3
While those colors may not be available, you should be able to dye your resin any color you would like. I don’t have a procedure for you, but you should be able to find some good info here on UA-cam about it.
@@SouthpawWorkshop *Looked it up*
Indeed you are correct! it looks like that might work! Thanks for the suggestion!
I can't wait to start making stuff! Although... gotta find a good place to print stuff. there's a lovely shelf in my bedroom, right next to where I sleep. But I have heard the smell can be quite strong so... I guess to the Garage we go.
Thanks again! :3
Have you noticed later seperation after forest 10 layers
How does one properly vent a resin printer like this?
Lots of people vent in different ways. Best way would be to keep it in a garage or some other location out of the house. I’m sure there are videos online about diy fume hoods if it has to be in the home
Does anyone know the speed difference between this and the color Anycubin Photon? I've got the color and was wondering if it's worth the upgrade. I know I can upgrade the screen in mine, but it's a real faff with the chance of breaking something, and the mono seems pretty cheap now.
Exposure speed on the mono is 2-3 seconds compared to the 7-8 seconds exposure on the standard photon. That doesn’t mean that the mono prints 2-3 times faster though. There is a lot of time spent lifting and repositioning the build plate, so I would say the mono is probably 20-30% faster than the standard. If I were you, I would use what you have until the lcd goes out, then consider upgrading at that point. Happy printing!
@@SouthpawWorkshop I know that some printers allow you to change the firmware to make the up/down movements faster. Does this mono have that possibility?
You can change those settings to a certain degree in Chitubox. I know some people heave experimented with pushing the limits of speed on these machines, but I prefer to keep my speed stock because the faster you move the platform, the higher the chance of print failure. So to answer your question, yes you can speed it up in the slicer and possibly push it even farther with firmware changes, but the law of diminishing returns applies prominently in this case. Good luck!
@@SouthpawWorkshop Thanks. I appreciate the reply.
my printer does not detect my files, what should i Do
What slicer and version you are using?
I need help very badly everything I try to print is coming out as broken supports of unrecognizable blocks i try to print some infaentry units or one single ork and each time it filled the entire build plate with random unrecognizable molds of split supports and random crap you cant even tell what the models were suppossed to be and I cannot find anything online at to help this I watched hours of troubleshooting videos and notbing as resolved the issue I repelled redid exposure times went back to factory exposure tried doing on mini at a time angled to 45 degrees and I keep getting just twisted melted piles of slag that dont resemble anything close to the model I am trying to print. It is becoming very frustrating to the point of wanting to cry I waited for so long and jumoed through so many hoops and worked my ass off to get this mono printer and I cannot for the life of me get it to print anything.
Sorry to hear about your troubles. Have you tried running some screen tests to make sure your screen is in good shape? There should be an option to display a grid pattern on the screen, lay a piece of paper over the screen and look to see if the pattern and intensity of the light is even across the whole surface. Another question I would have for you is what type of resin have you been using? I hope you can get your issues resolved soon!
@@SouthpawWorkshop the lights are fine I just checked it that was my first thing theres a video on my youtibe page I uploaded thank you and i am using the anycubic resin that came with my photon mono. I must be missing something I am brand new to 3d resin printing it pronts the test prints I followed instructions step by step for using chitubox for the photon I dont kmow what is happening.
@@SouthpawWorkshop I fixed it I have no idea what I did to fix it but it is printing now I think maybe I had overloaded to many models onto the printer or the files were corrupt.
Great news!
So that means with +$25 make it "perfect" for the price x benefits ?
I love how the printer performs, so yes I would say it is pretty much perfect with the upgrade
Could you please provide a link for the $25 aluminum replacement vat? Thanks
It is in the video description under “Sovol Resin Vat”. Note that the price has gone up likely due to high demand. Still worth it in my opinion though.
@@SouthpawWorkshop Oh man. I checked for that but I was viewing on my iPad and didn't see it. Thanks
Hi, you state that there are not many printers that are better at that price, I am wondering if you could list the ones that are better for roughly the same price. Thanks in advance
Check out the Voxelab Proxima. Same quality prints, better quality construction and probably about 25% less than the Anycubic Photon Mono. The only other that would be equal to the Photon Mono would be the Elegoo Mars 2.
When you say draw back , what do you mean ?
Drawback, as in negative attributes.
Proprietary FEP...really. Well I hope it goes on sale, otherwise its not the MONO printer I'll be buying since it comes with a $25 upgrade requirement. TY for the review