Thanks for uploading :) I noticed though that about a minute after you said you were no electrician, you actually touched one side of what looks to be at least a 300v capacitor, and really close to touching both sides with your finger. I kinda flinched cringed for the pop. Now I'm not sure if you had discharged that but I would warn anyone watching not to just be sticking your fingers around those capacitors unless they are properly discharged first, no matter how long the TV is unplugged.
Thanks much for video. I was either going to sell mine for $10-15 as parts TV at flea market but knew I can fix. The reason I knew it could be something simple is I am getting nothing. Not even the little red light. I knew it had to be fuse, cap or something simple. Basically knew it had to be something similar to a switch being turned off(blown fuse). Thanks much again for useful video. It has reassured me to keep it and I can fix it easily. Regards Shane
I have an older Insignia 65 inch. Red indicator light is on. TV will try to boot and get to the Insignia screen and maybe a half second or even less the screen goes all black. Tried all of the unplugging and replacing batteries. Removed all of the HDMI plugs to the tv. Any other suggestions. I've considered opening to see if any fuses were blown. Did that before on the tube TV's but never tried to open a flat
Hi Thank you for the video. I have question, the red light comes on the TV but there is no picture. Should I get this board or the main board? Thanks again.
Sorry, but I don't know how to advise you. In my situation, the entire board was blown so it made sense to replace the entire unit. However, in your case, it sounds like the circuits - at least some of them - are getting power, so there's probably a different solution to your issue. Wish I could be of more help.
Mine is an Insignia NS-PDP50. It will power on for about 20 seconds (showing the menu, etc.), then turn off. But if I put a video to it (HDMI) it shows the video for about 3 seconds then turns off. Would that be a video or power issue?
the problem that I'm having with my Insignia TV model number NS LT DVD 26 - 09 I have it on and play for a while and then cut off. I truly don't have a clue what to do with it. was hoping that you could probably give me a contact number or location near me and Harford County Maryland 21040 or a listing of your locations or contact number thank you George
It could be a number of things, bad power supply, blown capacitors, I'm not sure. Unfortunately, I don't have any contact numbers...Sorry, & good luck.
Thanks much for video. I was either going to sell mine for $10-15 as parts TV at flea market but knew I can fix. The reason I knew it could be something simple is I am getting nothing. Not even the little red light. I knew it had to be fuse, cap or something simple. Basically knew it had to be something similar to a switch being turned off(blown fuse). Thanks much again for useful video. It has reassured me to keep it and I can fix it easily. Regards Shane
Thanks for uploading :) I noticed though that about a minute after you said you were no electrician, you actually touched one side of what looks to be at least a 300v capacitor, and really close to touching both sides with your finger. I kinda flinched cringed for the pop. Now I'm not sure if you had discharged that but I would warn anyone watching not to just be sticking your fingers around those capacitors unless they are properly discharged first, no matter how long the TV is unplugged.
Thanks much for video. I was either going to sell mine for $10-15 as parts TV at flea market but knew I can fix. The reason I knew it could be something simple is I am getting nothing. Not even the little red light. I knew it had to be fuse, cap or something simple. Basically knew it had to be something similar to a switch being turned off(blown fuse). Thanks much again for useful video. It has reassured me to keep it and I can fix it easily. Regards Shane
Mine will show the red light when I plug it in but , it won't turn on when I press power button
Mine has the same issue. Did you manage to solve it?
Ace'd It! Gaming same
Same. If anyone finds the answer and or LED strips for this tv, please reply to my comment or OP s comment. Thanks!
Same here
I have an older Insignia 65 inch. Red indicator light is on. TV will try to boot and get to the Insignia screen and maybe a half second or even less the screen goes all black. Tried all of the unplugging and replacing batteries. Removed all of the HDMI plugs to the tv. Any other suggestions. I've considered opening to see if any fuses were blown. Did that before on the tube TV's but never tried to open a flat
I hear you saying “the board” but what type of board? Motherboard?
Thanks buddy , just what the dr ordered
Hi Thank you for the video. I have question, the red light comes on the TV but there is no picture. Should I get this board or the main board? Thanks again.
Sorry, but I don't know how to advise you. In my situation, the entire board was blown so it made sense to replace the entire unit. However, in your case, it sounds like the circuits - at least some of them - are getting power, so there's probably a different solution to your issue. Wish I could be of more help.
Mine is doing the same. It gets power but you can't turn it on. If anyone knows how to fix it please let me know. Thanks in advance!
do u see any light shine in the back of the tv
Romano mine has done the same thing, have you gotten any advice
PROBABLY NOT!
If there IS POWER but NO PICTURE it's the VIDEO COMPONENT..
Hey man thanks for the guide! helped me sooooooooo much!
Mine is an Insignia NS-PDP50. It will power on for about 20 seconds (showing the menu, etc.), then turn off. But if I put a video to it (HDMI) it shows the video for about 3 seconds then turns off. Would that be a video or power issue?
Idk bruh
Same problem menu is coming again and again led light is blinking
my red light doesn’t come on at all. does that mean it’s beyond repair?
Hi..., I have an insignia lcd model NS-32l45011. it turns on. But then I shuts down. Recommendations ..thxs
My tv has no standby light or won’t turn on, what should I do
hey there im looking a model NS-37D20SNA14
I'm gonna try to do this! Wish me luck
hi I have a question, I can't find a cheap power supply board for my 32 inch tv led insignia, are to expansive!!! 99 dolars!!!
Tony Gammarota I just got lucky. Happened to find a cheap board on eBay at the time.
Tony Gammarota eBay
If a fuse is blown it always indicates something else is wrong... :-)
Before replacing the fuse look for the cause..
good idea to buy the board 👍
It's sad you couldn't repair the old bord as well.
please ignore parts of that msg also the polaroid still does that and the insignia still in the same condition any info please would help
I was wondering where is the circuit boards model number? I can't find it lol
Lightning jolt or power surge
the problem that I'm having with my Insignia TV model number NS LT DVD 26 - 09 I have it on and play for a while and then cut off. I truly don't have a clue what to do with it. was hoping that you could probably give me a contact number or location near me and Harford County Maryland 21040 or a listing of your locations or contact number thank you George
It could be a number of things, bad power supply, blown capacitors, I'm not sure. Unfortunately, I don't have any contact numbers...Sorry, & good luck.
Insignia tvs are junk get em for free usually just got one red light no power up
I got this one for free too.
@@stantakvii their junk how long it last after u fixed
No one has the 55... model :(
Boom Chakka Chakka I have a 55in. My tv comes on and shut off when it want noy sure what that problem may be.
woud rather just buy a new one too much thinking
He sounds like Sam golbach
Thanks much for video. I was either going to sell mine for $10-15 as parts TV at flea market but knew I can fix. The reason I knew it could be something simple is I am getting nothing. Not even the little red light. I knew it had to be fuse, cap or something simple. Basically knew it had to be something similar to a switch being turned off(blown fuse). Thanks much again for useful video. It has reassured me to keep it and I can fix it easily. Regards Shane