Star Lab is the greatest CNC Plasma table for art and very very good at hard parts ...long guitar
Вставка
- Опубліковано 30 кві 2017
- 20 minute cutting of the 'House of the Rising Sun' Guitar....real size 200ipm with Hypertherms awesome fine cut consumables. www.StarLabCNC.com
- Наука та технологія
That is awesome speed and cut detail.
Is this a servo motor version of your star lab cnc? I have one of your machines, and it seemed that this machine accelerated and decelerated much faster than mine. I am just wondering because we cut a lot of thin sheet metal on the machine. I currently need to add lots of special actions slowing the feed rate in corners and turning the dthc off and then back on after the corner so I don't get a round corner, so I was wondering if any of the newer machines with servos fix this issue?
What year is your machine? Is it a Star Lab?
Also this a stepper version (Standard stepper running and not the updated NGEN large frame high acceleration stepper system). It is possible your machine is detuned.
I have a 5x10 table of yours. How do I get it to react this way with 105 amp on 3/8 plate?
Settings we used Pause at end of cut zero (That's a tool setting in sheetcam), Ref distance 40in (That's a custom post setting on sheetcam/options/machine/postprocessor/custom post options), Rapid clearance plane (.32), Plunge safety clearance (.25), Both of those options in sheetcam/options/job options. Perpendicular lead in (smallest per diameter of pierce hole), .030 overcut, no lead out.
Thanks