I'm looking to start a new project that I think would look very nice in a small scale, but couldn't find fabric with a high enough count. This is exactly what I needed! Thank you!
In theory yes, but that's likely going to be hard as that's a lot of floss in a tiny space. One over one would be likely better, but it depends on the thread count of the fabric you're using. Two over two, definitely, many of my samples are stitched up like that. 😊
thank you for this. I am an Aida stitcher, but am planing a HAED start on 25ct evenweave 1 over 1. I had heard that one has to check that thread does not slide under fabric. Now I can come back to a tutorial that explains everything 😅
I started a cross stitch pattern on 25 count evenweave many years ago and it said to use 3 strands over 1 square. At that time there was no UA-cam and i was folowing really basic instructions from a magazine! Recently, i dug it out as it was incomplete and im amazed at the neatness of the stitches. Ive never heard of stitches popping and im sure i just used to do all my stiches left to right and then completed them by going right to left. Now im confused as to whether i should just continue the way i remember stitching or be wary and try the Danish method??? Any suggestions? Ive no idea how i even managed to see the holes as theyre that tiny😂😂😂
Sorry I'm not sure what would be best to complete the pattern, it's been a few years since I made this video (and I've been focusing on getting back into oil painting in the meantime). But the instructions saying 3 strands over 1 on 25 count evenweave is wild to me, that's way too thick. Like even 3 strands over two on 25 count even weave would be bordering on too many strands (too hard to pull through the holes, increased likelihood of fraying or shredding your floss, your x's turning into little lumps, etc). So maybe that was a typo, it meant 3 strands over two, not over one. 😊
@peacockandfig thank you for all your advice....I actually ended up taking my stitching to a craft shop and someone kindly pointed out to me that I was actually stitching over 2 squares and not one !!! Seems my eyesight definitely isn't what it was then🤣🤣🤣 and I hadn't looked close enough!!! Oh and definitely it was 3 strands over 2 to give it a very full sense look .....sooo happy I can continue with it and not start again....glad you took the time to reply, really appreciate it
I just find it way easier to use, it's more slender so there's less friction between the needle and the fabric (and easier for me to hold than a chunkier needle), and the ball tip really helps in the same way as the rounded tip of a tapestry needle. The needles used to be sold by a friend, but she's passed them on to Sullivan's who is now selling them. Plus they take foreeeverrr to tarnish, my hands are really acidic and I can normally tarnish a needle in a week, whereas these ones are German steel so it takes me months and months to even start to see a bit of wear in the finish (with daily use). 🙂
Great minds think a like, pulled the 2 strand and replaced with 1.. Going alot better. Glad to know I'm not messing it up by reducing strands. 😁 Thanks for your quick response.
Dana, Why does it matter that you made the second stitch to the right? It seems like the process you followed would prevent the stitches from slipping under the top thread, and we DO have to travel back to the right after traveling to the left.
Because travelling to the left guarantees the stitches will be locked in place. You alternate which direction you're coming from for the second arm of the stitch, so that can pop out the previous stitch if you travel from left to right. 🙂You can try any way you want, but this is the way I learned to guarantee the stitches won't come out -- travelling right to left. 😊
And? Floss is literally cents per foot if you do the math (especially as you're usually using only one or two strands out of the six at a time), and this is the only way to stitch over one on linen because of the way the fabric is woven, you need to "lock in" your stitches. If you don't want to stitch this way, then just stitch over two, that automatically locks the stitches in place. Don't worry about using more floss or not, just stitch and enjoy the process. 😊
I'll think I'll stick with aida. I value my eyesight, linen and evenweave might cause me further problems with my vision. I have to wear glasses to help me see things more clearly from a distance. I don't want to have glasses to help me see from up close.
Does stitching over 2 on evenweave or linen require the same technique and attention? I'd like to try evenweave fabric for the first time but it looks quite complicated... just wondering, maybe over 2 is going to be easier? 🙈
I have a video about stitching over two, and no, you don't need to do it as specifically as I show in this video as you're going over two threads and not one. I usually stitch over two on linen, once you get the hang of it you'll likely really enjoy it. 🙂
@@peacockandfig thank you very much! I'll watch your video and give it a try (I mean stitching over 2, maybe on evenweave first) and see what happens =) I am really enjoying your videos and also like the way you speak, it's so calming and relaxing!
If your stitching right to left, shouldn't it be top right to bottom left, to save the use of waisting the thread? Then when you come back, it would be top left to bottom right? I work left to right, just making my head wrap around this,,,lol. So I understand ;)
Hi Leah! No, you cannot do that, the stitches will come unlocked, you have to do it how I showed. Please don't worry about "wasting" thread, there's so much thread in a skein and it's so inexpensive, like literally it's 2 cents per metre of a single strand if a skein is $1 each... Totally not worth stressing about. 🙂
You can, look at the graphic at 8:37. You'll just have to make sure your crosses are made bottom left-top right, and bottom right-top left. Otherwise the threads will slip out under the warp and weft of the fabric. And there is no "backwards" in stitching, you can travel in any direction you want.😊
i tried evenweave for the first time today. i like stitching 1 over 1 but don’t like the results. tried 2 over 1 which was better. decided to stick with 2 over 2 because I want to see my stitches. after stitching on lugana. i don’t want to stitch on aida.
You CAN stitch the “regular” way one over one. The trick is to not pull too tightly. Just like in any cross stitching on any fabric, the stitches should lay on the fabric, not be so tight they distort the warp and weft threads of the fabric. The tighter you pull, the more likely a stitch will slide into the fabric.
I don't know, I tried and my stitches slid, and I have really good tension on my stitching as I do so much of it for all my design samples (just one collection was about 300 hours of stitching). I have a feeling certain fabrics might be easier than others to stitch "normally," like if they're less silky then in theory the stitches should lock in place better. 😊
It’s hard to do over one on linen. I need strong glasses. I’ve haven’t had them slip but I’ve been really careful. And I wouldn’t pick a pattern that had a lot of over one. You need young eyes. I don’t do the “English” way if I can avoid it. It uses more thread and creates more bulk. The linen is harder but really looks a lot better.
Yes it definitely helps having good eyesight on your own, but those magnifying lights you can buy are pretty amazing, they can help tremendously. My eyesight is 20/20, but even I use reading glasses to help with finer work (like over one which I don't do a lot of personally, or fine couching or embroidery like silk shading, etc). And I think some types of linen and evenweave tend to be more prone to the stitches slipping than others, depending on how tight the weave is. These techniques will work on any of them though, but if you can stitch "normally" and not have the stitches slip, then definitely do that. 🙂
so watch it again then. 😊 Lots of people are fine with it, and to be honest this is a free tutorial. You’re going to make mistakes when trying out a new technique, so consider it a lesson in how to fix your mistakes. Refilming wasn’t an option for me - sorry you found it confusing, but at least I did it and it does work out in the end. Just give it a try.
I'm looking to start a new project that I think would look very nice in a small scale, but couldn't find fabric with a high enough count. This is exactly what I needed! Thank you!
Glad it helped Alyssa! 🙂
Could you do 2 over 1 on evenweave?
In theory yes, but that's likely going to be hard as that's a lot of floss in a tiny space. One over one would be likely better, but it depends on the thread count of the fabric you're using. Two over two, definitely, many of my samples are stitched up like that. 😊
This was a good video. I am trying a miniature counted cross stitch & have taken my stitches out multiple times. It's hard!!
Glad it was helpful Laura, good luck with your project! 😊
Just makes sense! Thank you 😊
You are so welcome! 😊
thank you for this. I am an Aida stitcher, but am planing a HAED start on 25ct evenweave 1 over 1. I had heard that one has to check that thread does not slide under fabric. Now I can come back to a tutorial that explains everything 😅
Awesome, good luck with that Dawn! 🙂
I started a cross stitch pattern on 25 count evenweave many years ago and it said to use 3 strands over 1 square. At that time there was no UA-cam and i was folowing really basic instructions from a magazine! Recently, i dug it out as it was incomplete and im amazed at the neatness of the stitches.
Ive never heard of stitches popping and im sure i just used to do all my stiches left to right and then completed them by going right to left. Now im confused as to whether i should just continue the way i remember stitching or be wary and try the Danish method??? Any suggestions? Ive no idea how i even managed to see the holes as theyre that tiny😂😂😂
Sorry I'm not sure what would be best to complete the pattern, it's been a few years since I made this video (and I've been focusing on getting back into oil painting in the meantime). But the instructions saying 3 strands over 1 on 25 count evenweave is wild to me, that's way too thick. Like even 3 strands over two on 25 count even weave would be bordering on too many strands (too hard to pull through the holes, increased likelihood of fraying or shredding your floss, your x's turning into little lumps, etc). So maybe that was a typo, it meant 3 strands over two, not over one. 😊
@peacockandfig thank you for all your advice....I actually ended up taking my stitching to a craft shop and someone kindly pointed out to me that I was actually stitching over 2 squares and not one !!! Seems my eyesight definitely isn't what it was then🤣🤣🤣 and I hadn't looked close enough!!! Oh and definitely it was 3 strands over 2 to give it a very full sense look .....sooo happy I can continue with it and not start again....glad you took the time to reply, really appreciate it
Thank you Dana. Notice that you were using a ballpoint needle. Does that needle make a big difference? Less fraying? or...? Peace and love
I just find it way easier to use, it's more slender so there's less friction between the needle and the fabric (and easier for me to hold than a chunkier needle), and the ball tip really helps in the same way as the rounded tip of a tapestry needle. The needles used to be sold by a friend, but she's passed them on to Sullivan's who is now selling them. Plus they take foreeeverrr to tarnish, my hands are really acidic and I can normally tarnish a needle in a week, whereas these ones are German steel so it takes me months and months to even start to see a bit of wear in the finish (with daily use). 🙂
@@peacockandfig Thank you. I will buy next shopping trip. Love your patterns and website. Peace and love
Great tutorial. Many thanks.
You're very welcome Lyn! 🙂
Amazing. Thanks
You're very welcome Rena! 😊
If the pattern recommends 2 strands how would you do the stitch on evenweave? I'm trying 2 strands and it's not looking great 😞
Forgot to add it's 28 count evenweave
Yeah you don't use two strands -- you switch to one strand. Two strands is too much for making such tiny dense stitches. 😊
Great minds think a like, pulled the 2 strand and replaced with 1.. Going alot better.
Glad to know I'm not messing it up by reducing strands. 😁
Thanks for your quick response.
Dana, Why does it matter that you made the second stitch to the right? It seems like the process you followed would prevent the stitches from slipping under the top thread, and we DO have to travel back to the right after traveling to the left.
Because travelling to the left guarantees the stitches will be locked in place. You alternate which direction you're coming from for the second arm of the stitch, so that can pop out the previous stitch if you travel from left to right. 🙂You can try any way you want, but this is the way I learned to guarantee the stitches won't come out -- travelling right to left. 😊
This seems to use more floss!
And? Floss is literally cents per foot if you do the math (especially as you're usually using only one or two strands out of the six at a time), and this is the only way to stitch over one on linen because of the way the fabric is woven, you need to "lock in" your stitches. If you don't want to stitch this way, then just stitch over two, that automatically locks the stitches in place. Don't worry about using more floss or not, just stitch and enjoy the process. 😊
I'll think I'll stick with aida. I value my eyesight, linen and evenweave might cause me further problems with my vision. I have to wear glasses to help me see things more clearly from a distance. I don't want to have glasses to help me see from up close.
You don't need to wear glasses, you can get magnifying lights. They're super helpful for all stitching, not just super close work like one over one. 🙂
Does stitching over 2 on evenweave or linen require the same technique and attention? I'd like to try evenweave fabric for the first time but it looks quite complicated... just wondering, maybe over 2 is going to be easier? 🙈
I have a video about stitching over two, and no, you don't need to do it as specifically as I show in this video as you're going over two threads and not one. I usually stitch over two on linen, once you get the hang of it you'll likely really enjoy it. 🙂
@@peacockandfig thank you very much! I'll watch your video and give it a try (I mean stitching over 2, maybe on evenweave first) and see what happens =)
I am really enjoying your videos and also like the way you speak, it's so calming and relaxing!
Is this the same for 22 ct hardanger?
Hardanger is a totally different stitching method, it doesn't use crosses but straight stitches. 😊
Hola! Como se llama esa aguja? Gracias
Sorry I don't speak Spanish Lupe. ❤
@@peacockandfig She asked how the needle is called. :-)
Easy Guide Ball-Tip needle... they come in sizes 24, 26 and 28.
If your stitching right to left, shouldn't it be top right to bottom left, to save the use of waisting the thread? Then when you come back, it would be top left to bottom right? I work left to right, just making my head wrap around this,,,lol. So I understand ;)
Hi Leah! No, you cannot do that, the stitches will come unlocked, you have to do it how I showed. Please don't worry about "wasting" thread, there's so much thread in a skein and it's so inexpensive, like literally it's 2 cents per metre of a single strand if a skein is $1 each... Totally not worth stressing about. 🙂
So we can't stitch left to right? I think this will be to much of a challenge, going backwards.
You can, look at the graphic at 8:37. You'll just have to make sure your crosses are made bottom left-top right, and bottom right-top left. Otherwise the threads will slip out under the warp and weft of the fabric. And there is no "backwards" in stitching, you can travel in any direction you want.😊
i tried evenweave for the first time today. i like stitching 1 over 1 but don’t like the results. tried 2 over 1 which was better. decided to stick with 2 over 2 because I want to see my stitches. after stitching on lugana. i don’t want to stitch on aida.
Glad you enjoyed working on evenweave, that's awesome! 🙂
You CAN stitch the “regular” way one over one. The trick is to not pull too tightly. Just like in any cross stitching on any fabric, the stitches should lay on the fabric, not be so tight they distort the warp and weft threads of the fabric. The tighter you pull, the more likely a stitch will slide into the fabric.
I don't know, I tried and my stitches slid, and I have really good tension on my stitching as I do so much of it for all my design samples (just one collection was about 300 hours of stitching). I have a feeling certain fabrics might be easier than others to stitch "normally," like if they're less silky then in theory the stitches should lock in place better. 😊
Peacock & Fig Might be. I stitch on only linen or 100% cottons. And... you do have to cross each stitch one at a time.
It’s hard to do over one on linen. I need strong glasses. I’ve haven’t had them slip but I’ve been really careful. And I wouldn’t pick a pattern that had a lot of over one. You need young eyes. I don’t do the “English” way if I can avoid it. It uses more thread and creates more bulk.
The linen is harder but really looks a lot better.
Yes it definitely helps having good eyesight on your own, but those magnifying lights you can buy are pretty amazing, they can help tremendously. My eyesight is 20/20, but even I use reading glasses to help with finer work (like over one which I don't do a lot of personally, or fine couching or embroidery like silk shading, etc). And I think some types of linen and evenweave tend to be more prone to the stitches slipping than others, depending on how tight the weave is. These techniques will work on any of them though, but if you can stitch "normally" and not have the stitches slip, then definitely do that. 🙂
this was really confusing and then the explanation that she shouldn't have done what she showed made it even more confusing,.
so watch it again then. 😊 Lots of people are fine with it, and to be honest this is a free tutorial. You’re going to make mistakes when trying out a new technique, so consider it a lesson in how to fix your mistakes. Refilming wasn’t an option for me - sorry you found it confusing, but at least I did it and it does work out in the end. Just give it a try.
I'm sorry that was too confusing...
Just watch it again as many times as you need - the technique isn't intuitive, it seems backwards until you try it a few times. 😊