Another great video. I like the opinions and cost of the build being discussed. Only possible thing missing that I see that gets asked a lot online is before and after measurements.
It’s a clean build! I can see this guy probably switching it up and doing an accent color or color matching the rims to make them pop more because they get a bit lost beneath the color of the truck.
That actually looks really good with the tow mirrors lifted and widened out, I wouldn't be running them on a stock halfton. To much mirror not enough truck
Great content 🤙🏽 Those traction bars all do the same stuff People just want to floss their money with little cosmetics like that Rough country still good for the buck
You asked what would make your videos better, more detail of other mods if any of the trucks you get in. Interior, engine, accessories etc... Anyway, still awesome videos!
Nice build. Truck looks great! What is the offset on these wheels. I have a trail boss with a 4” bds and running 20x10 -24 fuel wheels wrapped with nitto 35 x12.5. Looking to eventually upgrade to 22 x12 still 35’s but now I am thinking 24 x12 and 37”. I upgraded to a RC front bumper so I should have enough clearance. Keep up the good work!
Hey look at my face while I'm filming to say how great I am. Hopefully I can buy a few more comments and likes here so that more people can see what I see when I look in the mirror. Nice.
I have a same set up with size lift and size wheels . I have the predator R/T 35x13.50 but I like these 37x13.50 for my next set up . But maybe a M/T but not sure what tires . I have in mind the nittos , gladiator, our these fury’s u have on this video . What would be the most good looking but a good ride ? I don’t care about the noise
The Nitto and Toyo tires ride better than anything, hands down, but they are more expensive for good reason. The Fury is the next best thing and they are less expensive.
Buddy, how did you get the 37s to clear on that wide of a wheel? I got 35s in their rubbing bad with a 24 x 12 wheel with a 6 inch rough country lift mines a trail boss so it would be another 4 inches I guess instead of six but altogether it’s a 6 inches raised
And I agree with you on the situation with the wheels being the attention of the truck and not the mirrors
Its only an opinion, but that is what makes customizing great!
Another great video. I like the opinions and cost of the build being discussed. Only possible thing missing that I see that gets asked a lot online is before and after measurements.
Great point! Thanks for the input!
@@jakesliftedlifebuild looks amazing! Out of curiosity, the Chevy logo on the center caps…is that a decal?
😊😅s😮😮4
Sooo dope to see how it all came together great camera work!!!!! Will always be a fan!
You're the best!
Wow… that’s a nice setup!! Night and day difference!!
Yes it was!
Just got a 24 z71. I’m was debating on 6 in lift and 24 this vid sold me. Keep up the great content. Vid of what you trim off would be appreciated
Thanks, glad it helped. I'll see about that trim video.
The truck turned out badass! Keep up the hard work 💪🏻
Thank you!!
@@jakesliftedlife you're welcome 🙏🙏
hella nice truck looks amazing man
Thanks, man! I appreciate it!
I agree Jake the tow mirrors go better on the 2500. Dope build.
Thank you!
yea folk keep postin, luvin da content
Thank you!
It’s a clean build! I can see this guy probably switching it up and doing an accent color or color matching the rims to make them pop more because they get a bit lost beneath the color of the truck.
Badass truck man. Great job guys
Thanks 👍
The truck looks good. I like that color a lot. I added the boost tow mirrors to mines they don’t seem to stick out as far.
Thanks for watching! Yes, I really like this truck too!
Content is so dope that I subscribe to your channel from my other UA-cam that I mainly have for my truck
Thanks bro!
this rims for this chevy! clean footage 🔝🔝🔝
Appreciate it!!
Amazing build
Thank you!
That actually looks really good with the tow mirrors lifted and widened out, I wouldn't be running them on a stock halfton. To much mirror not enough truck
Looks great! Love seeing non-Z71 trucks.
Same here!
Truck looks really good
Great video
Thank you!
It’s the taillights for me👍
They are sharp for sure
Great content 🤙🏽
Those traction bars all do the same stuff
People just want to floss their money with little cosmetics like that
Rough country still good for the buck
I agree, I love Rough Country
Amazing
Nice video bro !!
Thank you!
You asked what would make your videos better, more detail of other mods if any of the trucks you get in. Interior, engine, accessories etc...
Anyway, still awesome videos!
Noted thank you!
Thank you Jake love the truck!!!!
You bet! BTW I was not hating on the traction bars if it seemed like it. That's the first set I have ever seen of those. I appreciate you brother.
No need to apologize I like that you are honest with your views as well as customers!!!!!! Ppl would be stupid not to come see you and the guys !!!!!!
Looks like you have the coil overs on the highest notch
Beautiful truck! would re-gearing be necessary with the 37's?
Not at all
Bro you’re killing it btw love the channel! Question, Is the is a 2.7 truck? I want to lift my brand new 2.7 Silverado
Thank you so much! This was a 5.3. This will work just fine on the 2.7 engine as well.
I have two comments first thing keep doing what you’re doing content is fire second thing how do you feel about wheel lights on black wheels?
Thank you for watching! And I think the lights are great on every color wheel!
Nice build. Truck looks great! What is the offset on these wheels. I have a trail boss with a 4” bds and running 20x10 -24 fuel wheels wrapped with nitto 35 x12.5. Looking to eventually upgrade to 22 x12 still 35’s but now I am thinking 24 x12 and 37”. I upgraded to a RC front bumper so I should have enough clearance. Keep up the good work!
Thank you! Yes you can do the 37" tires but there will be some trimming.
Mirror is badass bro !!! Its a need
They look good!
if we bring the kit what would it be for installation ???
that powda look familiar 🤩
Looked great!
Where did he get his color match mirrors
I think he had them painted at a paint shop.
@ okay
@ how much did it cost them
Awesome video Jake. I enjoy the content. Would you say a Mcgaughy’s lift is an easier install than other lift kits?
Thank you!!! The install is about the same.
What is the off set and you should show the trimming that was done
24X12 -51MM
@@jakesliftedlife spacers?
🔥🔥🔥
Hey look at my face while I'm filming to say how great I am. Hopefully I can buy a few more comments and likes here so that more people can see what I see when I look in the mirror. Nice.
What do you mean brother
what’s a good aggressive looking tire in a 285/60r20 that won’t give excessive road noise. love the video/truck🎉
Nitto Ridge Grappler, thanks for watching!
I have a same set up with size lift and size wheels . I have the predator R/T 35x13.50 but I like these 37x13.50 for my next set up . But maybe a M/T but not sure what tires . I have in mind the nittos , gladiator, our these fury’s u have on this video . What would be the most good looking but a good ride ? I don’t care about the noise
The Nitto and Toyo tires ride better than anything, hands down, but they are more expensive for good reason. The Fury is the next best thing and they are less expensive.
Any pics of what you had to cut
No sir I'm sorry. The only content I have of this truck is what is in the video. Thanks for watching!
Buddy, how did you get the 37s to clear on that wide of a wheel? I got 35s in their rubbing bad with a 24 x 12 wheel with a 6 inch rough country lift mines a trail boss so it would be another 4 inches I guess instead of six but altogether it’s a 6 inches raised
We just trim them
Link to mirrors!?😮
I did not sell the mirrors to him. I believe you can buy them on amazon.
Jake how long does it take for that build start to finish?? I got plenty more question..
This one took 2 days
How much you charge? Looking to do this to my 24 Silverado.
Shoot me a call 678-994-9180 and I'll price it out for you! Thanks
Why did you decide to remove auto running boards
I don't remember him having the auto steps, but if he did the 1500 steps only come out not down.
Could this set up work on 2024 gmc 1500 at4?
Yes sir
@@jakesliftedlifewould it need to be regeared to run 37s?
did you trim the front bumper or did you put a bumper spacer in?
We trimmed it
Do you have a video 22x12 on 37?
No I am sorry. Mostly we always do 24+ wheels. I have a video of a 2500 with 37 & 22 inch wheels
ua-cam.com/video/37H4PmAkHQo/v-deo.html
@@jakesliftedlife I saw it yea the body is dif so hard to tell if it’ll look good
Why traction bars on just a 6” lift
As the traction bars are really just for looks anyways, the customer wanted a "complete" look on the truck.
So with the lift and struts was that a 9/5 lift ?
6" front 5" rear
Did you use the 6” rear block that comes with the kit? Did y’all raise the height of the strut?
Yes, the struts come pre set and we did not change the adjustment, we installed the normal blocks in the rear.
lift kit, wheel and tires should be the star of the presentation not those ugly mirrors.
Tow mirrors on a half ton looks stupid.
It looks good when the wheels stick out
@ nah
This is a show and not a go truck. Take that truck in the mud and you better have a wrecker on speed dial to come pull your butt out.
That's fair
Another offset Bro Dozer….
What an absolute waist... not good for off roading at all.... total freeway truck....