I watched your other video on this - tried it two days ago. Was having cold sweat - to remove and fix back - thankfully all can fix back. took two hours plus... Thank you
thanks bro, first time managed to do this and cleaned up my aircon internals after 2 years, been trying to figure out how to open and get rid of the nasty molds inside... this helped alot!
Hello again..this time i couldnt take out the fan blower. After i take out the screw, the blower still wont come out. Think the shaft rusted and stick to the blower side. I sprayed wd40 also unable to take out.. Any thoughts?
i manage to do all in 2 hours first time. Difficulty will are putting in the Blower...and taking the drain Pan out because the hose connection was very tight. But it can give a thorough clean inside, and the blower...which is great..
This is the most detailed description on how to dismantle a Starmex aircon on UA-cam! I may have found the answer to my aircon problem. I have not been able to remove the blower after loosening the screw. I may have tightened the screw at a location slightly more to the right of the axle where you had advised not to do so in the video. If this is the case, should I remove the screw in order to take out the blower?
Yes. I'm facing this issue too. My aircon blower is stuck now, and the aircon guy say the screw is rusty and stuck in now. Any way, I can remove this now? I have tried and unable to remove the screw in the blower.
I just tried doing my air-conditioning cleaning today out of adhoc, couldn't book the service, the video here didn't show the exterior cover removal step, this is tricky step, after removing the 2 screws, one need to pop the center zone to unlock the hidden hook. It was scary experience on removing the louver tray.. almost given up. Thanks for the video sharing, somehow I did the full disassembly first before bumping to this video. the missing step of removing exterior
Thanks for the video! Really good explaination. For the newer model of starmex is the blower screw installation the same? Cause my screw pop out so i wonder is there suppose to be a hole for the screw and I misalign?
Great video for guide first timer to self clean the air con and save 80bucks. … just that mine the drain pan / the RHS drain tube cannot remove so left it hanging during cleaning …
Thanks for very informative video. But you didn't show how to unplug the lower component from aircon hose? I couldn't remove it to drain the water from the hose.
Just did it today!! Saved me at least $85. And good workout for me 😂. Had some difficulties at the start cox first time doing and my aircon joints were stiff. Figured it out eventually! Problem is there's still rust inside my Aircon, dunno how to get rid of those.
I took out the blower sometimes back, now I cannot remove the blower wheel despite removing the screw. I believe it’s the alignment not done properly the last time. Try to force it out but failed. What shd I do now to remove the wheel?
While using starmex at 3 bar fan speed with moving vane, the air con suddenly become like maximum fan speed and no led lights and vane stop moving stop in middle opening. What is happening? Thanks.
@@BonMj Did not set dry mode. Remote control was set to Cool mode, 3 bar fan speed, moving vane. Only pressed the remote control during switch on then did not touch remote control already.
@@BonMj Sometimes during using the aircon I hear a beep sound, is it normal to hear beep sound during using aircon? How many different types of beep sound does stamex have? Seems like there is different tone beep sound
@@BonMj finally did it after 45 mins hahaha.. try and error. Seems like the angle. Because earlier I keep trying, the fins like blocking it somehow..finally try different angle den ok
i have a problem my blower is stuck with the shaft? any solution to rectify it as i cannot remove the blower! it seem my brother have misaligned the blower last time. now desipte taken out the screw the blower is stuck tightly with the shaft!
Nice. Alot of details that only professionals know are explained. Saving us DIYers headahce.
Thanks
I watched your other video on this - tried it two days ago. Was having cold sweat - to remove and fix back - thankfully all can fix back. took two hours plus... Thank you
👍👍👍
thank you so much shi fu 😊 for your detailed step by step tutorial
Welcome
great! The first time I see the video on blower disassembly and assembly.
Thanks
thanks bro, first time managed to do this and cleaned up my aircon internals after 2 years, been trying to figure out how to open and get rid of the nasty molds inside... this helped alot!
👍👍Thanks.
Hello again..this time i couldnt take out the fan blower. After i take out the screw, the blower still wont come out. Think the shaft rusted and stick to the blower side. I sprayed wd40 also unable to take out.. Any thoughts?
Thank you for the detailed dismantling and assembling of the Starmex aircon.
Welcome
Very useful video and explained in
Simple manner. Thank you Very much.
Welcome 💞
Thank you boss for sharing, really appreciate . Very good information video.
Welcome
Very detailed and professional instructions. Very kind of you. Thank you very much. 👍👍👍
Thanks
Thank you very much for this video this really help alot for me and my family.
Thanks
Very detailed instructions. Thank you!
Thanks
Thank you for sharing such a detail video. 👍
Thanks
Very detailed and clear. Thanks a lot!
Thanks
i manage to do all in 2 hours first time. Difficulty will are putting in the Blower...and taking the drain Pan out because the hose connection was very tight.
But it can give a thorough clean inside, and the blower...which is great..
👍👍
Good quality content! Keep it up 👍🏽
Thanks
Nice but complicated 😊😊
is it possible to change the thermistor by yourself? i cant see the location of the thermistor from the video.
Would you be able to repair or replace a Mitsubishi starMEX swing motor?
This is the most detailed description on how to dismantle a Starmex aircon on UA-cam! I may have found the answer to my aircon problem. I have not been able to remove the blower after loosening the screw. I may have tightened the screw at a location slightly more to the right of the axle where you had advised not to do so in the video. If this is the case, should I remove the screw in order to take out the blower?
Loosen or remove and try use long screw driver adjust is slowly
@@BonMj Could you do a video on how to do this?
Yes. I'm facing this issue too. My aircon blower is stuck now, and the aircon guy say the screw is rusty and stuck in now. Any way, I can remove this now? I have tried and unable to remove the screw in the blower.
Don't force to remove the blower in case it crack or damage.
@@BonMj Thanks! Yes, keeping it intact for now. Anyway I can remove it to wash it in the future? Engage contractor for chemical cleaning overhurl?
I just tried doing my air-conditioning cleaning today out of adhoc, couldn't book the service,
the video here didn't show the exterior cover removal step, this is tricky step, after removing the 2 screws, one need to pop the center zone to unlock the hidden hook.
It was scary experience on removing the louver tray.. almost given up.
Thanks for the video sharing, somehow I did the full disassembly first before bumping to this video.
the missing step of removing exterior
👍
Very useful operation
Thanks
you own the unit?
Hi, which model is that one?
I cannot get the blower to move freely on reassembly. I am trying to properly align but it doesn’t seem to work. Please help
My blower cannot slide left and right after loosen the screw. How...?
Hi, can u make a video on how to remove/take out/detach the coil from the unit for washing the coil? Thank you.
Thanks for the video! Really good explaination.
For the newer model of starmex is the blower screw installation the same? Cause my screw pop out so i wonder is there suppose to be a hole for the screw and I misalign?
Grate video my friend!!!
Good evening from Greece
Thanks
Great video for guide first timer to self clean the air con and save 80bucks. … just that mine the drain pan / the RHS drain tube cannot remove so left it hanging during cleaning …
👍👍
Would it be possible to do this with the unit mounted on the wall?
Yes
Thanks for very informative video. But you didn't show how to unplug the lower component from aircon hose? I couldn't remove it to drain the water from the hose.
Just did it today!! Saved me at least $85. And good workout for me 😂. Had some difficulties at the start cox first time doing and my aircon joints were stiff. Figured it out eventually! Problem is there's still rust inside my Aircon, dunno how to get rid of those.
👍👍👍👍
How about Mitsubishi Heavy Industry Aircon. Is it the same ?
Not same
I have a sharp ac but the water from the eveporator doest go to the drainage pan just links down.
What is the problem
Check the top of the evaporator coil any cover. Suggest cover the top of the evaporator coil
థాంక్
Welcome
Is Mitsubishi or Daikin more durable last longer? Mitsubishi or Daikin quieter? Mitsubishi or Daikin easier to dismantle and assemble? Thanks.
I took out the blower sometimes back, now I cannot remove the blower wheel despite removing the screw. I believe it’s the alignment not done properly the last time. Try to force it out but failed. What shd I do now to remove the wheel?
Try force it slowly
Mr Bon Mj, is it safe to pull up the evaporator coil to take out the blower ? Thank you
This is the only way can take out the blower.
Very useful. Thanks.
Thanks🙏
another grate video
Thanks bro
Is it ok to use 3/4 inch insulation for copper pipe if I am worried about condensation on trunking for starmex system 3?
Yes,but if residences normally installer use 1/2 inch.
Anyone knows where I can purchase the bearing housing shown @4:32? mine is broken and it causes the blower to rattle when the system is turned on
Mitsubishi electric
My blower is stuck and couldn't pull and and cannot be tightened up… any advice to rectify it
Suggest you try to pull out and check the shaft is it uneven.
If the shaft ok,try to push in again.
My blower is stucked as well, previously can take out to wash but after screw back subsequently not able to, any idea why ?
It may be due to the screw tighten at the wrong section of the shaft.
@@BonMj any remedy ?
@@nichz82 try..slow force it out。
How to remove front cover
Nice video
Thanks
Why my blower so different I can't find or see the screw.. starmax MS-A10VD..
May this model the screw is at right hand side, need to remove pcb component.
While using starmex at 3 bar fan speed with moving vane, the air con suddenly become like maximum fan speed and no led lights and vane stop moving stop in middle opening. What is happening? Thanks.
Do you set dry mode?
@@BonMj Did not set dry mode. Remote control was set to Cool mode, 3 bar fan speed, moving vane. Only pressed the remote control during switch on then did not touch remote control already.
Should the indoor pcb not functioning well
@@BonMj Sometimes during using the aircon I hear a beep sound, is it normal to hear beep sound during using aircon? How many different types of beep sound does stamex have? Seems like there is different tone beep sound
@@jasonl4237 just on and off got beep sound
How to switch on/off without remote control? How to stop the beeping sound when switch on/off? Thanks
Press the button below the indicator light.
Remove the speaker from the pcb for beep sound.
I lost the screw for the blower :( Where can I get a replacement screw for it?
Any same size screw u can fix it or find at aircon recycling station or Mitsubishi
5:24min is important when assembling.
👍👍👍thanks
Great video unfortunately it didn't demonstrate how to remove the louvre. Nevertheless, thank you for the effort to demonstrate.
It seems he just pulled on it, pretty simple in that case.
On my unit it's much more complicated but I don't even have to remove it.
@@Mr3Trois3 I managed but with some doubt initially cuz my first time. Thank you so much, it'll be a much scary nightmare if without your guide.
I didn't manage to find your company's contact anywhere, I'll like to have you guys service my starmex aircon
Thanks
No proper show of dismantling of cover
Any tip if the blower get stuck?
It depends on the situation.
Try use long screw driver to adjust.
I follow your method exactly..now unable to fix the drain pan back. Seems like the drain pan will hit the metal fins leh... I can't put back oh my...
Push in from the right hand side.after that left hand side.
Or pull up the evaporator coil
Slot in the drain pan than fix the evaporator coil.
@@BonMj finally did it after 45 mins hahaha.. try and error. Seems like the angle. Because earlier I keep trying, the fins like blocking it somehow..finally try different angle den ok
@@jamesmadison3108 👍👍👍👍
How to remove n put on table.
Super
Thanks
i have a problem my blower is stuck with the shaft? any solution to rectify it as i cannot remove the blower! it seem my brother have misaligned the blower last time. now desipte taken out the screw the blower is stuck tightly with the shaft!
Try using big size screw driver to adjust