I bought one. The installation guide doesn’t match well with the screen protector and the screen protector doesn’t match the screen well either. The black bezels of the protector partially cover the phone screen.
Did you guys fine a better screen protector? Most of the black lip cases do this. Same with the ones without, they fit a tad too small. I can’t find any that go directly to the edges when the case is on.
@@infantrywagon I finally gave up using a screen protector with black bezels and chose Spigen screen protector, which isn't so great either. The oleophobic coating of the Spigen screen protector is just so so, definitely not as good as the ESR screen protector. You may want to try the recently released 3D screen protector with black bezels from FLOLAB, which seems accurate and isn't quite cheap and I haven't tried myself yet.
I have this screen protector and noticed that the black borders of the screen protector cover the screen a little bit, looking for a different screen protector now
One big change this year was the reduction in the bezel size, and the black band covering a portion of the screen was a real letdown. The quality of the product is great, as with most ESR products but I had to go to a different screen protector to enjoy the phone as intended.
I’m glad you gave your honest opinion about the dust collecting between the case and screen protector, despite the products being sponsored. I honestly hate that. I was going to buy this pack but I may just get their full length screen protector and then the camera lens protector separately rather than this version.
4:01 hmm I think you should use another screen protector each time for each drop I think, because that point is already weakened up by the previous drops. (It will cost too much to test this way 😅)
My issue with these is after a few months use, i guess the protective layer wears out and there is a huge smudge mark on the areas that are touched most. No matter how much i wipe it doesn’t go away. Only got 6-7 months out of it.
The amount of dust you just applied during that installation was probably wild. That's why the ones with the tear-off dust film are the best. And even then, I always have a few specks of dust underneath the protector.
Is there any distortions in the resolution after applying the privacy protector? Like are there visible lines and pixels on the screen or does the display looks as good as without a protector?
Yes, you’ll basically turn your 15 Pro Max into an iPhone XR. Pixels clearly visible and brightness is 30% reduced. I will return mine because it feels like I’m using a 2017 huawei
It is strange how the ESR Armorite previously survived up until an 8ft drop test and only managed 5ft this time. Does this mean ESR QC in manufacturing is not consistent?
Maybe it is the lighting, but in the quick camera testing, I feel the color white balance is a bit odd. It's hard to tell but I haven't seen that in your other videos, shrug.
hey sorry i couldnt help but notice your thumb nail, out of concern pls get your thumb nail checked by your family doctor, to make sure there is no malignancy. cheers
Definitely done the drop test on your thumb
I bought one. The installation guide doesn’t match well with the screen protector and the screen protector doesn’t match the screen well either. The black bezels of the protector partially cover the phone screen.
Same. A lot of the screen is cut out by the black borders of the protector.
Agreed. Got a refund for mine today. Too bad they can’t get rid of those black borders.
Did you guys fine a better screen protector? Most of the black lip cases do this. Same with the ones without, they fit a tad too small. I can’t find any that go directly to the edges when the case is on.
@@infantrywagon I finally gave up using a screen protector with black bezels and chose Spigen screen protector, which isn't so great either. The oleophobic coating of the Spigen screen protector is just so so, definitely not as good as the ESR screen protector. You may want to try the recently released 3D screen protector with black bezels from FLOLAB, which seems accurate and isn't quite cheap and I haven't tried myself yet.
How is Spigen AlignMaster?
I have this screen protector and noticed that the black borders of the screen protector cover the screen a little bit, looking for a different screen protector now
Torras Diamond Shield
its really hard to find one that doesnt cover the edges of the screen, but its also hard to find one that doesnt leave the visible/white edges
Its effect only on armorite SP 15 series?bought for 14 pro doesnt found something wrong🤔
Have u tried Spigen’s tempered glass?
How is it in landscape mode
Getting the ESR Amorite protector. Very helpful video. Thanks.
One big change this year was the reduction in the bezel size, and the black band covering a portion of the screen was a real letdown. The quality of the product is great, as with most ESR products but I had to go to a different screen protector to enjoy the phone as intended.
Does it have anti glare?
The camera protectors that come with The screen protector are The same that The ones that you have tested?Or are they different
I’m glad you gave your honest opinion about the dust collecting between the case and screen protector, despite the products being sponsored. I honestly hate that. I was going to buy this pack but I may just get their full length screen protector and then the camera lens protector separately rather than this version.
Looks like you did the drop test on your thumb before this video haha. Great video i just bought the ESR Armorite.
My thumb was the closest thing I had to do a quick pre test at the time to make sure the ball is hitting correctly 😂 The things I do for my viewers
4:01 hmm I think you should use another screen protector each time for each drop I think, because that point is already weakened up by the previous drops. (It will cost too much to test this way 😅)
My issue with these is after a few months use, i guess the protective layer wears out and there is a huge smudge mark on the areas that are touched most. No matter how much i wipe it doesn’t go away. Only got 6-7 months out of it.
The amount of dust you just applied during that installation was probably wild. That's why the ones with the tear-off dust film are the best. And even then, I always have a few specks of dust underneath the protector.
I’ve got the Armorite and the new version has the tear off applicator 👌
How do you take off/peel off the camera protector?
How to remove camera lens protector?
Your wallpaper?
Did u hit your thumb by any chance perhaps sir ????
Which colour lens protector have you shown in the video mate? Is this the Black or Clear version?
doest it compatible with spigen zero one case ? Thank you
Just got mine its covers the screen maybe like 1mm but it is noticable and annoying but the acreen protector itself is really high quality
Is there any distortions in the resolution after applying the privacy protector? Like are there visible lines and pixels on the screen or does the display looks as good as without a protector?
Even I wanted to know on this will privacy screen protector reduces the transparency?? Can you share your view on this
Yes, you’ll basically turn your 15 Pro Max into an iPhone XR. Pixels clearly visible and brightness is 30% reduced. I will return mine because it feels like I’m using a 2017 huawei
It is strange how the ESR Armorite previously survived up until an 8ft drop test and only managed 5ft this time. Does this mean ESR QC in manufacturing is not consistent?
Clearly shows in the video that it’s 8ft on armorite and 5ft on privacy :)
Because they both have different materials@@omones
I'm just wondering about taking the screen protector and camera protector off. Can you do it without damage?
Yes you can, I’ve done it 😊
I’m still waiting to find one that takes the curve in the 15 into account
Maybe it is the lighting, but in the quick camera testing, I feel the color white balance is a bit odd. It's hard to tell but I haven't seen that in your other videos, shrug.
I have this screen protector and I like it so far.
does the black sides of the tempered glass consume a bit of screen?
No. iPhone has a small black sides so it just mimics it
yeah... a lot. TORRAS is the best one.
Have you ever checked the scratch resistance of the camera lens itself. If yes, how was it?
Yes I have , it’s scratches at a number 6. Standard for regular tempered glass.
what’s funny because they claim it’s sapphire
@@el_semir exactly
Can you check if it fits with mous limitless 5.0 case?
I DEFINATELY BUY THIS
Calm down bud
hey sorry i couldnt help but notice your thumb nail, out of concern pls get your thumb nail checked by your family doctor, to make sure there is no malignancy. cheers
the bezels are thick, i bet they used the iphone 14 dimensions just to save money but you lose screen size
Bros got a MANicure on his thumb
I want your wallpaper 🥹