We show you how to adjust your Shimano Derailleur. Guardian Bikes is on a mission is to create the safest possible bike for kids. Learn More At: www.guardianbi...
I worked on my bike for 6 hours and couldn’t figure this problem out. Not one other video I watched showed me the solution in a detailed, systamatic way. Thank you so much for this amazing video, it solved all my problems.
Thank you for helping me sir because my rd isnt working properly and i am at 8th gear and whenever i pedal hard it will do a change gear thing for no reason but watching this video made my tourney good and fine so thanks you so much ‼️!!❤️
You can take this info and apply it to any derailleur, provided you can identify 'high' and 'low' limit screws you're good to go! This is a brillant no fuss instruction and I'm grateful to the presenter!
Derailleurs were always such a mystery to me. I needed to index mine and a simple barrel adjustment took care of it. This really helped with my Tourney.
Tell ya Bud: This is the absolute best derailleur adjustment vid on the tube. Just bought a new Aventon Soltera 7 E-bike with the Shimano Tourney system and would not go into 7th gear no matter what I did. Mostly because I had no idea what I was doing and very frustrated. Following your steps 1 by 1, it now works flawlessly. Can't thank you enough. Next up, you should do a simple chain cleaning and lubrication vid. Thanks again Sir.
Way too late, but do you remember what changes you made? I have a similar issue with a 6-speed shimano tourney that won't go into the 6th gear. Shifter is on 6 but the chain stays on the 5th sprocket.
@@mcstar8885 You run the chain down to the smallest sprocket which in your case is 6 gear. Then use the screw marked H to align derallieur with that gear. Then do the same for gear #1 using the screw marked L. Then choose gear #3...make sure gear selector says #3 as well and use the twist knob on cable to synch.
Amazing. My kid’s bike wouldn’t shift into either the highest or lowest gear and we didn’t have time to get it in to a shop before his bike camp next week. This saved us! I was able to get it shifting fully and smoothly in like 10 min. Thank you for such a clear and detailed walkthrough.
My bike's gear wasn't properly tuned when I bought it a few years ago. Sometimes the first gear refuses to engage. Your video gave me confidence to tune it myself. My gear now shifts smoothly from the lowest to the highest without fail each time. Thank you!
I concur! This is about the 10th video on this matter I've watched. And this one being the only that helped me, the 5th gear barrel adjustment specifically 👍👍
I'd just bought a cheap Chinese ebike and the gears were off. Having watched another video about adjusting I thought I'd give it go. I made it worse.... I then watched your video and I realised the relationship between all the screws... I've fixed my gears. Thank you, thank you
I must say that your step by step and explanation imo is the best how to video for this part that I have found on UA-cam. it was easy to understand, you did an excellent job describing it as well as showing the whole procedure. I now finally get it.
You sir deserve a big applause. I watch the video from park tools and I was like wtf are you talking about. After struggling for 2 hours today in adjusting it I took a ride to test and it was messed up. I called a bike shop got quoted 15 bucks but then I did another search and ran across your video and I have to say it's golden. You explained everything in a way that's it's easy to understand and without alot of extra mumbo jumbo. I took another shot at it and I think I got it right. If not I'll take another shot at it when I get my bike stand. Your video was key to my success. So I thank you very much. 👍👍👍👏👏👏🙌🙌🙌🤝🤝🤝
Finally I learned how to set the limits on my Tourney derailure. Annoyingly the limit screws on the Tourney aren’t labeled. Since I don’t have a bike repair stand I use my trunk mounted bike rack instead. Works well.
Excellent video....totally helped me. We bought a Lectric 2.0 bike for my wife recently and it had a Shimano Tourney derailleur. The Lectric website said to watch their 'all inclusive' video on how to set it. Guess what? The only part that matched was turning the barrel adjuster to index the gears. I spent the better part of this afternoon guessing at the high and low adjusters cause they didn't match the video. You saved me a lot of grief my friend and thanks for the clear and concise video with excellent lighting and vocalization. I've watched enough poorly lit videos with bad sound to appreciate yours to the 'nth' degree. Appreciate the work you put into it. Dean
Explained crisply, clearly and understandably. Got 2 Internet bikes and neither was adjusted correctly. Thanks to your tutorial, this made it easy to adjust the rear derailleur perfectly. Now both bikes shift buttery smoothly just as you demonstrate here. Thank you!
Totally concise and perfect instructions.....Thank you! FYI-I don't have a bike stand, so working in the garage, I have a wooden beam, took a screw hook and put it into the beam. Then took a small bungee cord and strapped the front wheel to the frame, so it doesn't spin. Then took a ratchet strap with one end in the hook, and the strap was wrapped through the rear rack. Finally, it was just a matter of ratcheting the strap until I got the rear wheel off the ground to make the derailleur adjustments. Of course a repair stand would be steadier, but I only do minor stuff to the bike, and this worked out perfectly.
Thanks for your Video Tutorial, I was Able to Adjust my Mountain Bike, took me just 1 hr to make it run smoothly, I was about to giving up on adjusting my Deraillleur, and ended up fixing it👍🏽👍🏽👍🏽
Great job! All I’ve ever gotten for advice is Adjust your limit screws then play with the barrel adjuster until it works. Your video had me dialed in in about 5 minutes. Thanks!
Thank you soooooo very much!!! I have an Lectric Ebike, and the chain had been starting to slip, and yesterday it came off on the hi gear. I already had a bike stand for it, so I had to make two adjustments following your video, and now it's working as it should. I really can't thank you enough!
At almost 61 I've just got back in cycling with an ebike. My bike is shifting well but what you've taught me is great to know. Excellent informative video.
This is the most simple yet highly understandable video that i have seen regarding gearshifting problems...my gears works fine now after following your tutorial..kudos👍👍👍
Thank you so much for a detailed and well presented video! I also spent a bunch of time trying to figure it out on my own with no success. This video was great. Thank you
Thank you for a clear instruction video - some make adjusting a derailleur seem so complicated. When I watched your video it simplified everything - thank you!
This was excellent. I just finished fixing a flat and adjusting the rear derailleur on my wife’s beach cruiser, so we could ride to some 4th of July festivities. Very easy to follow. We are hitting the road, thanks!
Nice instructions I was able to dial in my 21 speed. You Tube trilogy of Shimano Tourney's helped me with learning a new skill. Saved me a few $$'s too! Thanks
I dont have a driving license, and public transit in my area is ... not the best ... so I rely on my bike to get around. I'm greatful for this video because it saved me a trip to a bike repair shop after my 5th gear on the rear tire began to slip and then droped to the next lower gear along with gears 2-6
This helped a lot after I figured out that the cable was not tight enough. Once I loosened the nut and pulled the cable tighter, I was then able to follow this guide and get my derailleur working correctly.
Hahaha, 30 seconds to solve something stuck for maybe a couple years now... The bike came with the chain falling away into bike when in low gear, but our neighborhood was flat, so no big deal. Now it's not anymore, so.... They said you'll never now how much is it worth to know the right screw to adjust.... True! Thanks, Guardian!! 🥰
Thank you for helping me sir because my rd isnt working properly and i am at 8th gear and whenever i pedal hard it will do a change gear thing for no reason but watching this video made my tourney good and fine so thanks you so much ‼️!!❤️
I have awful problems adjusting the gears on my bike I have to take it to the shop every time. This video is by far the simplest way to fix your gears I'll have a crack at it tomorrow.
Very informative and professionally done video. Clearly explains the purpose of and how to adjust the high & low screws and the barrel adjuster. Thank you. One matter that wasn't addressed it what is the purpose of the screw pointing back on the rear derailleur
The screw pointing back on the derailleur adjusts the chain tension. If you just want to readjust an existing setup you typically don't have to make changes here. If it's a new installed derailleur you have to shift into the lowest gear (the one with the biggest cog at the rear) and tighten the screw until the upper pulley stops to touch the cog. With too little tension the pulley will roll onto the cog. It's well adjusted at the moment it lifts up the chain on the underside of the cog. This adjustment is independently from the other adjustments (sideways), it just stops the rattling sound the pulley will make if it rolls on the biggest cog.
Thank you for going over this so well , it’s something I always forget by the time i need to adjust my derailleur again. I prefer to start this procedure by adjusting the cable clamp first, so that the cable is adjusted to be tight when the chain is set on the 7th, highest gear.
Excellent video. Thanks! I was able to get mine set very quickly. The only trouble was that the chrome part that the derailleur attaches to, which then attaches to the frame, was bent inward. So I wasn't able to get the chain all the way onto the high gear. All it took was a big screwdriver and some pulling on it to straighten that out. Note: a lot of the bikes have aluminum frames these days, and you DO NOT want to bend the dropouts on an aluminum frame. You can bend aluminum once, but unlike steel, it will break if you try to bend it again. So if you run into this problem on your bike, make sure you are placing your screwdriver or small crowbar onto the steel chrome piece to bend it back out, and not the frame dropout itself.
Thank you for this video. I have the Shimano 6 speed derailleur and it was occasionally dropping the chain when I shifted from 5th to 6th. I studied your video and applied what you said, and no more dropped chain.
I worked on my bike for 6 hours and couldn’t figure this problem out. Not one other video I watched showed me the solution in a detailed, systamatic way. Thank you so much for this amazing video, it solved all my problems.
Happy to hear!
I’m nowhere near as tenacious as you, so after two minutes I searched UA-cam and found this excellent video and got the same result.
The tourney rear derailleur come with a b tension screw that is to small. Replace that and it will be easier
@@GuardianBikes👍🏽👍🏽
Thank you for helping me sir because my rd isnt working properly and i am at 8th gear and whenever i pedal hard it will do a change gear thing for no reason but watching this video made my tourney good and fine so thanks you so much ‼️!!❤️
By FAR the best how-to for the Tourney derailleur.
You can take this info and apply it to any derailleur, provided you can identify 'high' and 'low' limit screws you're good to go! This is a brillant no fuss instruction and I'm grateful to the presenter!
Derailleurs were always such a mystery to me. I needed to index mine and a simple barrel adjustment took care of it. This really helped with my Tourney.
This is gold. Never knew about the line thingy regarding those limit screws
Thingy.
Thingy
Cable?
Tell ya Bud: This is the absolute best derailleur adjustment vid on the tube. Just bought a new Aventon Soltera 7 E-bike with the Shimano Tourney system and would not go into 7th gear no matter what I did. Mostly because I had no idea what I was doing and very frustrated. Following your steps 1 by 1, it now works flawlessly. Can't thank you enough. Next up, you should do a simple chain cleaning and lubrication vid. Thanks again Sir.
Way too late, but do you remember what changes you made? I have a similar issue with a 6-speed shimano tourney that won't go into the 6th gear. Shifter is on 6 but the chain stays on the 5th sprocket.
@@mcstar8885 You run the chain down to the smallest sprocket which in your case is 6 gear. Then use the screw marked H to align derallieur with that gear. Then do the same for gear #1 using the screw marked L. Then choose gear #3...make sure gear selector says #3 as well and use the twist knob on cable to synch.
I felt the same way 😂
@@mcstar8885did you get it
Amazing. My kid’s bike wouldn’t shift into either the highest or lowest gear and we didn’t have time to get it in to a shop before his bike camp next week. This saved us! I was able to get it shifting fully and smoothly in like 10 min. Thank you for such a clear and detailed walkthrough.
My bike's gear wasn't properly tuned when I bought it a few years ago. Sometimes the first gear refuses to engage. Your video gave me confidence to tune it myself. My gear now shifts smoothly from the lowest to the highest without fail each time. Thank you!
Thx so much now i can enjoy my Croatian biking along the shoreline without hearing the neverending clicking. Best guide
Brilliant. Short, concise. Extremely well explained. Told me exactly what I needed to know without any unnecessary waffle.
Glad you enjoyed it!
2 years on..... I agree. Great video 👍
I concur! This is about the 10th video on this matter I've watched. And this one being the only that helped me, the 5th gear barrel adjustment specifically 👍👍
@@rcyalater...2305
I found this too....
Hands down the best video on indexing rear derailleurs .
I'd just bought a cheap Chinese ebike and the gears were off. Having watched another video about adjusting I thought I'd give it go. I made it worse....
I then watched your video and I realised the relationship between all the screws... I've fixed my gears. Thank you, thank you
I must say that your step by step and explanation imo is the best how to video for this part that I have found on UA-cam. it was easy to understand, you did an excellent job describing it as well as showing the whole procedure. I now finally get it.
You sir deserve a big applause. I watch the video from park tools and I was like wtf are you talking about. After struggling for 2 hours today in adjusting it I took a ride to test and it was messed up. I called a bike shop got quoted 15 bucks but then I did another search and ran across your video and I have to say it's golden. You explained everything in a way that's it's easy to understand and without alot of extra mumbo jumbo. I took another shot at it and I think I got it right. If not I'll take another shot at it when I get my bike stand. Your video was key to my success.
So I thank you very much. 👍👍👍👏👏👏🙌🙌🙌🤝🤝🤝
Amazing job!
Finally I learned how to set the limits on my Tourney derailure. Annoyingly the limit screws on the Tourney aren’t labeled. Since I don’t have a bike repair stand I use my trunk mounted bike rack instead. Works well.
Thorough, concise and easy to follow. Tutorials are not easy to make, but you have nailed this. Thank you very much, and well done.
Thanks for the upload. This vid is short and sharp get to the point video. 5 mins and I've managed to tune my derailleur.
Excellent video....totally helped me. We bought a Lectric 2.0 bike for my wife recently and it had a Shimano Tourney derailleur. The Lectric website said to watch their 'all inclusive' video on how to set it. Guess what? The only part that matched was turning the barrel adjuster to index the gears. I spent the better part of this afternoon guessing at the high and low adjusters cause they didn't match the video. You saved me a lot of grief my friend and thanks for the clear and concise video with excellent lighting and vocalization. I've watched enough poorly lit videos with bad sound to appreciate yours to the 'nth' degree. Appreciate the work you put into it. Dean
Happy to hear you got it adjusted! :)
Explained crisply, clearly and understandably. Got 2 Internet bikes and neither was adjusted correctly. Thanks to your tutorial, this made it easy to adjust the rear derailleur perfectly. Now both bikes shift buttery smoothly just as you demonstrate here. Thank you!
Great to hear!
Totally concise and perfect instructions.....Thank you! FYI-I don't have a bike stand, so working in the garage, I have a wooden beam, took a screw hook and put it into the beam. Then took a small bungee cord and strapped the front wheel to the frame, so it doesn't spin. Then took a ratchet strap with one end in the hook, and the strap was wrapped through the rear rack. Finally, it was just a matter of ratcheting the strap until I got the rear wheel off the ground to make the derailleur adjustments. Of course a repair stand would be steadier, but I only do minor stuff to the bike, and this worked out perfectly.
Thank you very much! You just saved me and my bike!
from the thousand of video tutorials available this is the video to watch !
By far
Thanks for your Video Tutorial, I was Able to Adjust my Mountain Bike, took me just 1 hr to make it run smoothly, I was about to giving up on adjusting my Deraillleur, and ended up fixing it👍🏽👍🏽👍🏽
This is the best tutorial on how to make your bike shift perfectly
Glad it was helpful!
Thanks for that, just what I needed after an hour of going round in circles. Much appreciated.
One of the best explained videos I found about adjusting derailleurs, thanks for this.
The most excellent video on 7 speed Shimano derailleur adjustment I ha e seen. Clear, decisive, and brief. Thank you!
Glad you enjoyed it!
Finally. A bike guy on bikes. Well done. This is an explanation!
Thanks so much!
I just got a bike with a Tourney 8-speed. Thank you so much for this dense, concise, and super helpful video
Great job! All I’ve ever gotten for advice is Adjust your limit screws then play with the barrel adjuster until it works. Your video had me dialed in in about 5 minutes. Thanks!
Thanks you so much. After watching countless videos I finally found one that actually enabled to fix my shifting problem.
Thank you for the perfect video! I was able to adjust my derailer and now all seven gears are working perfectly for the first time in months
Great instructions, straight and to the point, easy to follow without a bunch of hoopla.. Thank You!!
Great stuff! As a wannbe home mechanic, this kind of information is invaluable to me. Thanks so much!
Glad you enjoyed it!
@@GuardianBikesA downright straight-to-the-point, easy to follow guide! Thanks for this. I just tuned mine
Thank you so much for providing this step-by-step instructional tutorial. I now have seven gears instead of five!
Your video saved me thousands of dollars in repairs!!
Best video ever made about the rear derailleur adjustment. Thank you so much!!!
Glad it helped!
Life saver! As the total noob that I am, you made this so easy. Thank you I can't express my appreciation enough. 👍🙂👍
Great to hear!
Thank you soooooo very much!!! I have an Lectric Ebike, and the chain had been starting to slip, and yesterday it came off on the hi gear. I already had a bike stand for it, so I had to make two adjustments following your video, and now it's working as it should. I really can't thank you enough!
Great to hear!
At almost 61 I've just got back in cycling with an ebike. My bike is shifting well but what you've taught me is great to know. Excellent informative video.
Glad to help
This is the most simple yet highly understandable video that i have seen regarding gearshifting problems...my gears works fine now after following your tutorial..kudos👍👍👍
Great to hear!
Should’ve seen this before spending 2+ hours figuring out hour to adjust it. Excellent video. Thank you
Glad it helped!
Thank you so much for a detailed and well presented video! I also spent a bunch of time trying to figure it out on my own with no success. This video was great. Thank you
Wife’s e-bike has been an issue since we bought it years ago. All fixed thanks to this. I know it’s an old vid but thanks for the detailed help!
Glad it helped
Thank you for a clear instruction video - some make adjusting a derailleur seem so complicated. When I watched your video it simplified everything - thank you!
You made my day watching your video and easily adjusting my derailer. Thankyou.
You are welcome!
Thank you for this video, saved me alot of time.
A small tip - turn the bike upside down when you are missing a stand.
This was excellent. I just finished fixing a flat and adjusting the rear derailleur on my wife’s beach cruiser, so we could ride to some 4th of July festivities. Very easy to follow. We are hitting the road, thanks!
Nice work!
You deserve a billion subs dude. Thanks for the video.
Glad to help
This was SO helpful - slow placed, detailed, straight-to-the-point, *great visual guides*, clear instructions. Thank you SO much!
Best explanation, best camera point of view! Excellent!
Glad it was helpful!
I've watched a lot of these video's and this is the first one that has worked and actually made sense. Thanks a lot for sharing!
Yood bless you and youtube, this is truly what the future is about.
Perfect directions on how to adjust my own stuff
Couldn’t be a better instructional video. Kudos.
Thanks, would never figure it out without this
Best video I have seen for this specific Set up
Fantastic tutorial! Shift smooth as butter. Should practise it on my Tourney tomorrow.
Have fun!
Nice instructions I was able to dial in my 21 speed. You Tube trilogy of Shimano Tourney's helped me with learning a new skill. Saved me a few $$'s too!
Thanks
I dont have a driving license, and public transit in my area is ... not the best ... so I rely on my bike to get around. I'm greatful for this video because it saved me a trip to a bike repair shop after my 5th gear on the rear tire began to slip and then droped to the next lower gear along with gears 2-6
This helped a lot after I figured out that the cable was not tight enough. Once I loosened the nut and pulled the cable tighter, I was then able to follow this guide and get my derailleur working correctly.
Awesome! Great job.
Great video that your for the clear explainations and giving the extra reasons for why you make the adjustments the way you do. Really appreciated
Awesome video, easy to understand! Would have never figured it out without it!!
I have had my bike skipping gears for ages u explained it so well thanks
Great to hear!
Finally a clear explanation on this black magic part of the bike!
This is clear, concise, and all around excellent! Thank you!
best description and demo I've seen so far
Solid work buds. Tuned my sons used bike to perfection. Thanks!
The most understandable video in youtube about bike gears
You should see park tools tutorial on gears..
Just bought a bike and will use this to set it up. Great video!!!👍👍👍
Best damn instructional video I've seen in a long time! Well done sir!
Really helpful and now my son’s bike’s gears are sorted! Thankyou!
Hahaha, 30 seconds to solve something stuck for maybe a couple years now... The bike came with the chain falling away into bike when in low gear, but our neighborhood was flat, so no big deal. Now it's not anymore, so.... They said you'll never now how much is it worth to know the right screw to adjust.... True! Thanks, Guardian!! 🥰
Thank you for helping me sir because my rd isnt working properly and i am at 8th gear and whenever i pedal hard it will do a change gear thing for no reason but watching this video made my tourney good and fine so thanks you so much ‼️!!❤️
thanks so much for this video. Such a good guide I was able to fix my 20 year old bike
why would anyone give this video a thumbs down???? Thanks for posting it.
You're welcome! Have a great day.
You made It sooooooo easy to fix my problem with my derailler!! THANK YOU
this was the only video i understood lol thankfully I only needed to adjust the barrel
I have seen lots of videos but you elaborate this very easily 👍👍🙏
So nice of you
Excellent tutorial 👌! Concise, precise, and easy to follow.
I have awful problems adjusting the gears on my bike I have to take it to the shop every time. This video is by far the simplest way to fix your gears I'll have a crack at it tomorrow.
Super helpful video! Got my daughter's new gears shifting really smoothly.
Great to hear!
Well, before watching this I had no idea what a barrel adjuster was but this explains it perfectly! Thanks for the excellent video. 👏🏻
Super helpful straight to the point tutorial.
Very informative and professionally done video. Clearly explains the purpose of and how to adjust the high & low screws and the barrel adjuster. Thank you. One matter that wasn't addressed it what is the purpose of the screw pointing back on the rear derailleur
The screw pointing back on the derailleur adjusts the chain tension. If you just want to readjust an existing setup you typically don't have to make changes here. If it's a new installed derailleur you have to shift into the lowest gear (the one with the biggest cog at the rear) and tighten the screw until the upper pulley stops to touch the cog. With too little tension the pulley will roll onto the cog. It's well adjusted at the moment it lifts up the chain on the underside of the cog.
This adjustment is independently from the other adjustments (sideways), it just stops the rattling sound the pulley will make if it rolls on the biggest cog.
Great, accurate and easy to understand for beginners. Thank you!
Omg they always make it look simple. I live in a complicated world or something. My hands are black from chain grease lol... good video!!!
Glad it was helpful!
Thank you for going over this so well , it’s something I always forget by the time i need to adjust my derailleur again.
I prefer to start this procedure by adjusting the cable clamp first, so that the cable is adjusted to be tight when the chain is set on the 7th, highest gear.
Thank you so much, very helpful. I'm a beginner and some of this stuff is surprisingly hard to find
Your are form Indian
Gold! Perfect video! I wasted 4 hours before finding this
Thanks! You made my life way easier with this video.
One of the best explained Videos !
Excellent video. Thanks! I was able to get mine set very quickly. The only trouble was that the chrome part that the derailleur attaches to, which then attaches to the frame, was bent inward. So I wasn't able to get the chain all the way onto the high gear. All it took was a big screwdriver and some pulling on it to straighten that out. Note: a lot of the bikes have aluminum frames these days, and you DO NOT want to bend the dropouts on an aluminum frame. You can bend aluminum once, but unlike steel, it will break if you try to bend it again. So if you run into this problem on your bike, make sure you are placing your screwdriver or small crowbar onto the steel chrome piece to bend it back out, and not the frame dropout itself.
Excellent!!!! In a very detailed yet simple way. Ty!!!
That was the gr8est!!! Thanks so much. They're all different and order of execution matters.
Bro, you explained so simple, in first time I was able to adjust it. Thanks alot👍
Glad to hear that
This video helped me out a lot. Thanks
This is by far the best explanation, very helpful! Thx!!
Glad it was helpful!
Thanks. Bike wasn't going into 7th. This helped me adjust it
Thank you for this video. I have the Shimano 6 speed derailleur and it was occasionally dropping the chain when I shifted from 5th to 6th. I studied your video and applied what you said, and no more dropped chain.
Thanks for sharing
short, simple, best example here of adjusting this type of derailleur.
Excellent. Uncomplicated, taught very simple. Thank you.
Glad it was helpful!