Throwing out my N-Fab running Boards for Go Rhino RB20’s!
Вставка
- Опубліковано 29 сер 2024
- Join me installing my new Go Rhino RB20 running boards on my 2019 Toyota Tundra. Check out the links below for all the products I’ve added to my truck and don’t forget to Like and Subscribe it really helps!
Go Rhino Textured RB20 Running Boards:www.amazon.com...
Use code KCTUNDRA at sparksparts.com to save 5% off of your order!
Check out all the modifications I’ve added to my truck here! linktr.ee/KC_C...
Link to Firestone Airbags: Firestone W217602445 Ride-Rite Kit for Toyota Tundra www.amazon.com...
Driver’s side grab handle: www.sparkspart...
Interior LED light kit and Reverse light: www.amazon.com...
Antenna: www.amazon.com...
Tailgate Inlay lettering: www.amazon.com...
N-fab running boards: www.amazon.com...
Start-X Remote Starter For Toyota Tundra 2018-2020: www.amazon.com...
Pedal commander: www.amazon.com...
Pro-Comp leveling kit: www.amazon.com...
Tonneau Cover: www.amazon.com...
WeatherTech Floor Mats: www.weathertec...
Granite Alloy Wheels: m.tirerack.com...
Falken Wildpeak Tires: www.discountti...
RCI Skid plate: rcimetalworks....
TRD Exhaust: www.sparkspart...
www.sparkspart...
Amp Research Bed Step: www.amazon.com...
Wireless Phone Charger: www.sparkspart...
Tail Lights: www.amazon.com...
Just put these and love them! But the go rhino logo on rear of each is killing me! Maybe I’ll paint them.
However, based on the comments it’s sounds you and I put our brackets on facing the wrong way lol. Well there is no way in hell I’m switching them.
I have the same GoRhino boards I put on my 2020 Tundra. I have had them for about 8 months love them much better in the winter as far as slippage goes.
That’s so good to hear! I hated falling off of mine it hurt so bad lol
Did you go for the liner finish? or the plain? My concern is slippage on the plain vs dirtyness on the liner finish. Any comments?
I put the exact same ones on my Tundra last week. Directions are garbage from go rhino. Double cab instructions when I have a crewmax. Instructions shows lock washers and more hardware then I actually got. I didn’t install them that day because I thought I had the wrong ones. Come to find out they updated the hardware and didn’t say anything about it. Finally got them on and I like them. They stick out far enough to protect against door dings.
Just got my running boards and hardware too and thought the same thing! Do we not need lock washers when using the black coated bolts and flat washers?
Looks solid! You want it to stick out a little to so when you park in spaces at the mall other car doors might hit your running board instead of hitting your door. Plus it looks a lot more sturdy and safe. Great install, Thanks.
That’s exactly right! Thanks for watching! Like a subscribe if you want!
I put the RB 10 on my truck. Basically the same installation. Great product. Make sure your wife doesn’t slide out of the seat and drag the back of he shoe heel (or Achilles heel) down the edge of the board. My wife ruined a couple pair of shoes doing that. The rhino liner scraped the finish right off.
Oh yeah we already ran into that! Got to be careful! Thanks for watching!!
KC, thanks for the video man! I just got myself some RB20's for my F150. Excited to throw them on.
They are great running boards. I hope you enjoy them!
Hey there very nice I think you cover things very thoroughly and showing how your foot fittes on the running broads was helpful thanks Machinegunner!!
I've got bronze fuel wheels on my sky silver tundra, love the look
Thanks so much! Me too!
Perfect explanations and thanks for all the tips!! Can’t wait to install mine.
Thanks for making these videos. Just picked up a 2021 Tundra Friday and I can't wait to start the mods. Stay tuned.
Enjoy it man! It's a fun process!
Thanks for this review and info. I too had been looking at the N-Fab offerings, but these Rhino's are the running boards I decided to go with for my 2021 RAM 2500. I am also a big dude and think these will do just fine. I also like, and didn't realize until your video, that they will offer a little door ding protection. Much appreciated!
No problem man! Thanks so much for watching! Hope you enjoy!
I’m currently installing these on an f250 and the adjustment process is so frustrating but they look very good.
Nice job. I went with RB10”s Because I like the uniformity all the way down the truck and the lock.
Awesome! Glad you like them!
I just ordered me a pair. Can't wait!
Great video Austin Believe it or not I have the exact same N-fab running boards on my 2022 Tundra and I like them ok but they just come down too far and I don't like the look. The crazy thing is, I too ordered the RB20 slimline before i saw your video. They will be here next week so your info was timely and I sure do appreciate it. Looks sharp!!
Sucks that the Bed liner finish is only on the top of the boards. Doing any off road will sand blast the crap of the bottoms and rust will start for me on the salty roads.
Hey brother. I have the same go rhino RB20 running boards. I love them. My wife and friends like them a lot more. Easier to step up when getting into the truck. Great choice 👍🏼
I appreciate that feedback! They are a bit higher but feel a lot more confidence inspiring! Lol
@@kccreations5945 At first I had my reservations but after a few weeks I really fell in love with them. Great design and great upgrade 👍🏼 Keep up the great videos
I've got the textured Nfabs, while I do consider the steps small (I wear a size 13 boot), I've never had an issue slipping off.
About 8 years, and they still look like new.
The truck is looking good.
Love the running boards Austin! I like how you take your time and make it fit perfect! Great lines man!
Great review/video; I just installed some on my Silverado; as I’m in the midwest, I sprung for the lined version like you and I was a little disappointed they weren’t lined on the bottom for weather/rust protection but we’ll see how they do. Also appreciate you mentioning the flared design in the front which reduces slightly as it works to the rear.
Very good video. The camera work was great also.
I just ordered a set for my Tundra. I crushed my shin with wet shoes from wet grass on my NFab Predator bars. Predators just weren’t cutting it.
That’s exactly what happened to me and why I made the switch!
Those look so sweet man, I wanted to get this originally but i found someone with a platinum who was selling their OEM running boards is got for a smoking deal. But in the near future, I might swap over to these. Remind me so much of the steps that come on the raptors. Best looking running boards on the market imo
Yeah sometimes you just have to go with the good deal! These are the running boards that are on the Ford Raptor! lol you were spot on lol
Great review man. This video just made the decision for me for the very reasons you mentioned. They look great on the truck and I like how they will help prevent rock chips and door dings.
The brackets were put in on the wrong side, that’s why they fit weird.
It would have been a much better design had they welded the steps to the mounts. They could have attached the mounts to the back of the step and eliminated the low hanging portion of the mount which could potentially catch on a obstacle. Additionally, it would have also removed several steps from the installation process.
Not practical when replacing the boards, if you need a warranty replacement you take off the board and put a new one on. No need to replace brackets, plus you can swap any of the RB series boards if you'd like and they fit the same bracket.
Looked great!
Nice video, I think I'm going with these or the new narrow version. Thanks!
Great transformation. I’ve been eyeing these. What’s next? Clazzio seat covers? LOL
Haha thanks man! I’ve been eyeing some carhartt seat covers! But they are $$$$!
Way nicer looking running boards 👌🏻
Just bought a set for my Tocoma l have seen some people turn them wide side in the back and narrow side in front to give the truck more of a prerunner look have you tried flipping them nice review
Looks good!
Wish there were options like that for my 07 Ranger.
Very nice video! Could you tell me what kind of tires you have? I like the aggressive look! I have a 2008 2Wheel Dr. with a 3 inch leveling kit in the front so I’m trying to get some tires and go with largest I can fit
Hey Thanks! I have Falken Wildpeak AT3's. They are 295/70 R 18. Check out my video titled 34's are better than 35's!
thanks for this awesome video
Thanks for watching man!
I like those taillight covers,where did u get those, those boards are nice
Hey man! The link to all the parts on the truck are in the description. I also have a video on the taillight install!
I like them a lot I ended up installing go rhino D6 on my Tundra and they are great so far. Unrelated to your video but what mats are those in the back under the oem that provide that much coverage?
I saw a different video where that person said to install the flange of the mounting brackets to face the rear of the truck is this true or how you orientated the flange forward correct?
Umm it’s been quite a while since I installed them but I think what I did was correct… lol
Off topic, which tail/rear lights are those? They look amazing
They look great. Now how do I buy them, sneak them on the truck without the wifey noticing? Do you have a video for that?
Do what I did have them shipped to my work address and install at work and if she notices act dumb!! What are you talking about sweetheart "those have always been there" throw a little dirt on them.
Hey nice truck. Can you tell me what size lift you have and tire size you have.
Hey Austin! Henry here from Southern California ......I just bumped up my 2021 tundra with a 3 inch lift to a 6 inch lift MAXTRAC and extremely Happy 😊 ......Im thinking about changing my side steps to a Rhino RB20's .....are you happy with your RB20's ? Hope you and family are well
Hey Henry! I love them! They are a little high with my tires and lift so be ready to hike up your leg a bit to get it. But the clearance is nice and they don’t slip when they are wet so definitely worth the textured upgrade! Hope you enjoy!
Hey Austin, thanks for making this video. I still haven’t put running boards on my ‘21 Tundra and was debating between both of these sets. I’m leaning toward the Rhinos, especially after your video. My only concern with the Rhinos is bed access. I like the idea of better access with 3 step N-Fabs. What is your experience with this? Thanks again!
I felt that way too in the beginning but honestly I wasn’t able to use the third step very well since it’s so small. I installed a step under the bumper (check out my video) and just use that to hop into the bed! Hope that helps!
Is the Go Rhino brand plate glued or riveted on the side of the running board? I guess the real question is, "Can it be taken off easily?"
I think it’s riveted on! But I’ve seen people take them off!
Do you find they stick out too far or not noticeable? I'm currently going back and forth between the RB20's and the N-Fab EpYx.
Hi, just wondering how you like the new running boards. The OEM RBs on my ‘17 Tundra peeled apart and I like the looks of these, esp the non slip surface. Thanks!
Hey man I’m loving them! They are a bit taller so that took some getting used too but they are great non-slick boards and look great to me! They have also deflected a ton of gravel from the body so that’s a huge benefit! Thanks for watching!
@@kccreations5945 I looked these up on Amazon and they say it doesn't my '17 Tundra double cab? I went to GoRhino's site and they say it does. Did you pay $600+?
Am I the only one that got sent half the u brackets I needed? I neee 8-4/side and they sent 4 total
Ooh that stinks I’m sorry:/ I got all 8
@@kccreations5945 had to check UA-cam to make sure I wasn’t crazy! Thanks for the video, was good though
@@Rickwynne thanks man! You aren’t crazy!
HIGH CLEARANCE TO?
Do the running boards come with all the brackets or do they have to ne bought separately?
It comes with everything you need!
@@kccreations5945 awesome thanks. Love how your truck is looking. I got the same one last week. Ordered the steps and only the steps just showed up. Called company and they are sending rest of the kit.
Are you thinking to trade for the new model tundra once it's out?
I don’t think so at this point but maybe down the line!
how is it on a winter weather?
Honestly pretty good! If it gets ice built up it doesn’t work, but wet and slushy it’s pretty good! Better than slick metal ones!
@@kccreations5945 does it move or something on overtime? does it make noises too since its all need to be hooked up?
DON’T buy these for a RAM 1500!! If you have any attention to detail the RB20 running boards will not work out for your 1500! Fitment and tweaking doesn’t fix the foundational issues.
Why? What year Ram?
Great Video, I would like to Purchase your N-Fabs from you, let me know Thanks
Are you in the KC area??
@@kccreations5945 Nope, I wish, Southern California!
I will sell you mine they are 2 months old. Paid $500 for them will give you a brother in-law deal. $225 if you pay shipping.
@@shanewhittemore I appreciate the offer, we ended up going to with Amp Research Powersteps.
Thank you though,
"Merry Christmas" 🎅 🎄
Lemme buy your old ones
Where do you live??
Texas will you ship?
Shoot me an email and we could maybe figure something out. kccreationsyt@gmail.com