The backup and moldboard extension on that rock bucket is in no way designed for that. That a 12mm weld on the inside and 8mm 4@12 stitch on the outside under back up. Youd be better off using the lift lugs on the back or moldboard or top of the back up or around the hing points even.
@henkoosterhof5947 yep,but if the brakes are locked you have to get the tires off the ground to get it to move, hook it closer to the Loader less Folcrum easier on the Loader same stress on the Chains ,work smarter not harder ,that's why Granny got to be so old
Watching this show struggle pained me. I wanted so badly to yell just grab a smaller loader and push those front wheels strait again, chain binder them from moving again then also use that loader to aid in pushing the unit and then you have full control.
Quinton… I wear headphones 99% of the time…your “wind noise” wasn’t even enough for me to change my volume levels, and I hate loud/ obnoxious videos! (Still trying to boost the algorithm) 👍👍❤️
if you got that much money to buy a used/retired truck like this.... maybe buy a brand new one.... why dump more cash into it??? which makes me believe this is all staged for a youtube video to get ppl to watch it and like is all over the world.... i knew it was a dang staged video 2 minutes in ......
You should never comment on a video that you have no idea what this gentleman proffestion is . He buys and sell USED Equiment and fixes them and sells them .
My Zacklift could totally tow that..
Lets put it to the test!
Something tells me that there’s gonna be a video on Casey side and maybe the iron king
@@quintonbartolotta I’m down!
I’d pay a quarter to that! LOL
👍👍❤️
Only if it's Snowing hard and ice is on the ground ,I just want to see you say "no not doing it "
Over kill is not having to many chains, it,s when you overlook something and kill somebody. 13:52
Nice work putting that big boy right where you wanted it.
👍👍❤️
Hope the engine is running as the V12 is one great haul truck engine!!!
What too soon. Have A great day.
Great video love the channel hope the UA-cam algorithm kicks in and you get many many more subscribers.
Great job guys. Thank you 😊
Awesome heavy equipment channel love your Videos keep on wrenchin 👍👍
Looks like the loader was a tad light on the tail a few times!
It'll be interesting massive tear down.
Quinton, maybe you could make a set of dollies like a wrecker has for stuff like this . 🤔🤔
It is in a new dance CAT WALK.
Totally enjoyed the video
Love content from the Nevada shop.
Now just need the GODZILLA yankum rope
Me to haha
Yall have the big boy dunnage!!
That's a really nice trailer eh!
that's a really nice trailer. truck was rigged up perfectly from what i could tell.
Good video Quinton. Didnt know you had a youtube channel. It just came up in my feed.
Chaining the tie rod so that the front tires stayed straight would have helped. Also, I am surprised that rear end of that thing is so heavy.
Just a baby haul truck too used to 797s and 980s
There’s your rock crawler!😮
Start of worlds largest tow truck??
so the look is gud but wen you not can fix it wat you dow with dis ?
for srap i think not but for the disel bruther it cut be insteresand .
By the way if you put a dump unit it is good for over 100 tons!!
Well. That loader engine was finally doing some job. Guess it burned clean😉.
That is cool. Thanks for the video
The backup and moldboard extension on that rock bucket is in no way designed for that. That a 12mm weld on the inside and 8mm 4@12 stitch on the outside under back up. Youd be better off using the lift lugs on the back or moldboard or top of the back up or around the hing points even.
You bought that to enter Matts Off Road Games 😂😂😂
That was amazing. I’m fascinated by the beam trailer. How far did the 777B get hauled? What’s Casey going to use for the other 60K of weight?
lol These are small,,,,,Compare to the 797F 798AC,T282 T284,EH5500AC and 930e and one of my Fav 980E
Could you use grease pressure instead of oil pressure to release the brakes
No that would contaminate them, plus it would risk destroying the deflon seals that hold the brake oil pressure
Grease!
holy shit that thing is huge
You need to get a LaTournal front end loader the largest front end of in the world
that guy runs that Wheel Loader like an OLD LADY 😂
Better save granny than dead granny. With things stretched to the limits like this only patience can help you.
@henkoosterhof5947 yep,but if the brakes are locked you have to get the tires off the ground to get it to move, hook it closer to the Loader less Folcrum easier on the Loader same stress on the Chains ,work smarter not harder ,that's why Granny got to be so old
@@XLTJeff wanna see your video on doing it right
@braddewitt7831 I'm sorry but you don't have the required security clearance
@@XLTJeff in other words your full of shit
Should have used the forklift to straightened the steer tires and used the forklift to help drag it
That forklift wouldn’t even come close to helping.
Worlds biggest off road wrecker!👉🏼
Watching this show struggle pained me. I wanted so badly to yell just grab a smaller loader and push those front wheels strait again, chain binder them from moving again then also use that loader to aid in pushing the unit and then you have full control.
Loader needs grease
Yes it does, it’s getting a PM next week
Quinton… I wear headphones 99% of the time…your “wind noise” wasn’t even enough for me to change my volume levels, and I hate loud/ obnoxious videos!
(Still trying to boost the algorithm)
👍👍❤️
Thanks!
The chains are garbage now, seriously
It’s likely we didn’t learn anything from the grader. Maybe catch up on your physics.
if you got that much money to buy a used/retired truck like this.... maybe buy a brand new one.... why dump more cash into it??? which makes me believe this is all staged for a youtube video to get ppl to watch it and like is all over the world.... i knew it was a dang staged video 2 minutes in ......
You should never comment on a video that you have no idea what this gentleman proffestion is . He buys and sell USED Equiment and fixes them and sells them .
@@kerrypope767 oh you know all that but cant spell??
@@bp-eu6sh I stand by my comment , spell check error ...