Free Solar Panels Running Appliances Direct, No Inverter!, No Batteries! DO NOT TRY THIS AT HOME!

Поділитися
Вставка
  • Опубліковано 25 гру 2022
  • DO NOT TRY THIS AT HOME!
    DISCALIMER
    I will not be responsible for anyone who try's this and blows themselves to hell.
    This video is for educational purposes only.
    An example of how you can run scraped and free solar panels directly into appliances with a heating element or a brush motor without the need of an Inverter or Batteries!
  • Наука та технологія

КОМЕНТАРІ • 24

  • @chriskwakernaat2328
    @chriskwakernaat2328 Рік тому +8

    universal motors, like in a vaccumecleaner run on ac and dc , so yes, they do work directly off solarpanels. a heating element is just a resistive load , it doesnt care if it's ac or dc.

  • @thebugacademy
    @thebugacademy Рік тому +1

    smart man, makes me wish I lived in Australia, gives new meaning to the expression, land of the free,
    thanks bruv, I hope one day I can run everything this way, I would not be able to even see a solar panel that big in the UK, and it would cost a small fortune too big for me,

  • @jaybee3165
    @jaybee3165 Рік тому +1

    bravo!

  • @petert8931
    @petert8931 24 дні тому

    3:21 it's funny you should mention sand batteries, I had looked up "how to run solar panel directly" precisely and got to your video because I was thinking of using several solar panels in series to directly power a dumb water heating element into a bucket of sand during the day and bringing that pot in to release heat into the target area during winter night. More power, less power it doesn't matter; all that is needed is to convert whatever power and drive a resistor to cause heat to dump into inert sand.
    Or for a smaller setup ; for eg for people without a whole backyard or just access to 1 solar panel ; could be to a 12/24V PTC Heater into a home made PCM.
    Great idea!

  • @vishnudanraj2570
    @vishnudanraj2570 Рік тому +3

    U, R, such a genius bro. How many watt are the panels.?

    • @shanecox4053
      @shanecox4053 Рік тому +2

      Holla,
      All up it works out to be about 1000W

  • @fridayoghenekevwe4888
    @fridayoghenekevwe4888 11 місяців тому +2

    Thanks allot I don't need batteries
    West Africa is ever sunny
    I can do my works in the day

    • @jonahmaringe7141
      @jonahmaringe7141 10 місяців тому +1

      But how do you connect the appliances direct? They can burn

  • @p0rt0mark0
    @p0rt0mark0 Рік тому

    The saw can cut anything? because under load is normally harder to work

  • @pr5991
    @pr5991 2 місяці тому

    Even Ryobi corded lawnmower and line trimmer works to do the lawns where house power supply cannot reach.

  • @johnstone-gh9nj
    @johnstone-gh9nj 9 місяців тому +1

    Hello, have you tried heating water for domestic purposes with the PV panels.

    • @patrickbodine1300
      @patrickbodine1300 9 місяців тому +3

      I have 4 panels @34v each, wired in series. 2 are connected to the bottom element and 2 connected to the top element. Mind you, these bottom 2 panels have the glass shattered and coated with the clear Flex Seal. They still put out 34v each. This photovoltaic array combination are heating an electric water heater salvaged from a mobile home. I did not change heating elements. I have it plumbed in just before my small rv water heater and the water gets really hot year 'round. Some days hotter than others. I have plenty of hot water for showers, washing dishes, what have you. Don't tell me it won't work. Because I know it does. Have a great day!

  • @Rj-nh1df
    @Rj-nh1df 7 місяців тому +3

    He seems like a mix between Johnny Depp and someone from the movie, Tombstone 🪦 I'm thinking Doc Holliday

  • @vasuboya2756
    @vasuboya2756 4 місяці тому +1

    How we have resolve switching problems , specially DC Arc when we do switch off?
    Is there any better idea other than DC breakers and installing capacitors, which should work on both AC and DC power?

    • @sepracon
      @sepracon  4 місяці тому +1

      I am not an electrical engineer, but you need a switch at the inlet and not on the device unless its modified, it is easier to pre set the deice to its working configuration and then just switch the power on using a plug or a high voltage switch.

    • @pr5991
      @pr5991 3 місяці тому +1

      Use electrolytic capacitors in each power board, the capacitors absorb the arc or use dc rcd switches, I am using these methods in Melbourne, have got old panels for almost nothing, put these in series to make 240 volts, run induction cooker, kettles, electric cooking devices directly from it. In Melbourne these panels are almost free, I am using DC isolators near the load and also near the panels, so I can switch off from both switches to increase the safety. You can find 500v capacitors from old electronic circuits.

    • @hx4791
      @hx4791 3 місяці тому

      example i do is ...solar panel plug in to 24v dc to 12v dc convertor then plug to a pure sine wave invertor say 300watts to convert the 12v dc to AC then plug in to appliance...there are plenty youtube vids...search run solar with no batteries

    • @Lij_MC
      @Lij_MC 2 місяці тому

      ​@@sepracon Hi where are the best places to pick these old panels up in Melbourne?
      Where to look?

  • @MrRerod
    @MrRerod Рік тому +1

    What's the correct term for this? P V direct? And I'm really curious about your 800 degree storage system. Who needs batteries?

  • @SoeMoenaing-vw8py
    @SoeMoenaing-vw8py Місяць тому

    I think we must need to calculate the
    amp

  • @DavidMata-wz7bx
    @DavidMata-wz7bx 13 днів тому

    How do you do

  • @SunilKumar-nu2xc
    @SunilKumar-nu2xc 3 місяці тому

    Work iron directly or not

  • @user-cj4zm1se6m
    @user-cj4zm1se6m 4 місяці тому +2

    Smps appliances like most ohone chargers, LED TVs, etc will run off that supply too