You need to emphasize the camera rolling issue - and how to find known good cameras, like Caddx rattel 2 which is going to work with it. Usually they do a almost white version of these as well, I have the V1 cobra X in white for the exact reason you mentioned - heat in summer. The power management is what the V1 should have been, at least its fixed on V2! A good 18650 3000mah Panasonic cell only goes for about 20min on V1 so seeing it go to 1hr for V2 is great. Just want to emphasize that this is a really nice unit if you wear glasses or want a set you can pass to anyone standing by to have a look at what FPV is all about. That DVR looks so good btw.
So i have an issue with the DVR being way darker compared to what i see in my glasses when i'm flying do you have any idea what does that? I've tried googling it etc, but not been able to find anything on it.
Thanks for the detailed take down and re-build...a google saver. I like my upgraded Cobra V1 to V2. My only challenge is getting it to be comfortable and in focus. I put DJI foam on it, but it is a bit thick and I wear reading glasses. works well. I will eventually make replaceable lens where to stock lens fits. Skyzone, you could make us a handy lens set.
I love my cobra v1. Ill deffinetly upgrade them woth the new boards. So far im super happy with the purchase, for the price u seriosuly cant beat it, unless u get a great deal on somthing used u aint beating them, IMO.
@@TweetFPV I contacted sky zone and if there are parts available to upgrade I’ll post a link. The rolling screens issue I’ve only had one camera and switching to diversity was the solution. Tweetfpv,Have you tried Scout box goggles?Im just curious how they compare.
Hello, please help. I bought this goggles, then I bought a high discharge 60A 18650 (40A continous). My question: is it safe for the goggles? I'm afraid to test
Does anyone know if the Skyzone Cobra V2 HDMI In works with the DJI HDMI out Smart Controller? If I purchase the Skyzone Cobra V2 can I view in the goggles what is on my DJI Smart Controller with the HDMI In?
I have them. I'm not wearing any glasses. However, they sit very awkwardly on my face... Do you have any suggestion how I might improve it out assuming my face will remain the same?
Is there anyway to retrieve a copy of the firmware files that the goggles are running? I "upgraded" my Skyzone Cobra X V2 to the "newest" version of DVR firmware from Skyzone's website, but it took me from 2.00.00.10 down to 2.00.00.09. If it is retrievable, I would very much appreciate a copy of the the 2.00.00.10 firmware 😬
I only wanna joint hobby buy if i understand it well its not only good because of glasses but also because of cheaper price / manufactiring price... Thats why i thinking about these... Good reciever=range and image for good price... Did i get right? Or is there something better for me outhere?
I bought a Top RC Spotter V2 FPV camera/transmitter with a cloverleaf antenna. Should I be using the LH or RH CP Axiii antennas to replace the ones that came with the Skyzone Cobra V2 fpv box goggles? I am new to the hobby and know very little yet.
It's going to depend on which antenna is on your transmitter. Most of the time the tx if it isn't linear it's going to rhcp. You can usually tell from the product documentation. If they don't list it you can look at the antenna lobes from the top down and if it appears to make a upper case "R" shape then it's rhcp.
@@TweetFPV Wow, that was fast, thanks. The documentation that came with the camera/transmitter does not specify and actually states the product might come with a whip or cloverleaf antenna. Mine came with a 4 lobe cloverleaf. looking down on the antenna it appears the high point of the lobe is on the left and it slopes downward to the right.
Based on a video I just looked at it appears that this is actually a LHCP cloverleaf design. Please let me know if you agree or disagree based on my description above. Thanks for your advice and guidance.
These are great. But just about any circular polarized long antenna will work well www.racedayquads.com/collections/rhcp-antennas/products/foxeer-lollipop-v3-5-8ghz-10cm-long-range-sma-antenna-2-pack-rhcp-choose-your-color/?aff=52
Actually no I don't think it will work. It is an AV input, not output. Yes pins may be correct etc, but it's expecting audio in, not putting anything out..
Hi TweetFPV, would these be an upgrade over the skyzone 02x for image and reception quality? Also I feal these would probably be a better fit fit for my face type.
It would be an upgrade in that sense but flying in box goggles is a whole different experience than traditional goggles. I'd try a set of box goggles first before you buy them. To me the aspect ratio is wierd.
please deeper test it. I have Skyzone Cobra X v1, and i think it reduce FPS (in live fpv mode). It is not 60/50fps livestream from quad. in my opinion it showed to 25/30 fps. image not smooth like a another analog fpv goggles.
I'm at an estimated 50 hours on my Cobra X V1. Like them a lot. Thanks for comparing the DVR with the Orca. I think the upgrade kit is worth to buy. Both the DVR improvement and an extra 20 to 30 minutes (original running time 35-40 minutes on a 1S3000 18650).
The battery life on the original was too low to be "comfortable" and it cut out pretty much immediatly. So I designed and printed myself a bay for 21700 5000mAh that fit (barely) in place of the original battery bay. Just upgraded to V2 and testing how long it will last on 21700 :-)
@@Przemo-c Do you notice the difference in weight, around 25 extra grams, in front of your nose? Tomorrow I'll get my V2. I'll use my V1 for long distance with 150 mm Pagoda and a 4S5000 21700 pack, that will last a very long day. The V2 will be used for flying whoops and 3" around the house, without the hassle of external batteries. Should last for 1 hr, and changing for a full 18650 takes 15 seconds. Your 21700 5000mAh should last for 1h20min I guess?
@@ApappieK It does feel slightly heavier. But i didn't see it affecting comfort. And I don't notice it when flying. It lasted about 2h 30 min before battery low warning popped up. And then it worked fine for 10 min but it was starting to brown out. This is with medium illumination dvr off and fan set to 15. And the browning out wasn't total screen out and in. It was momentary partial blinks. More than enough to bring a quad back! One thing about my adaptation for 21700... it's tight. Hard to swap out. But with that runtime it's more than enough. I'll probably try tommorow with max illumination and DVR but I bet it will still be more than enough as it was pretty good on the V1.
Hello! Great review! I’m looking into getting the Skyzone Cobra X goggles and wear rather wide glasses. Do you know what maximum width glasses frame that’s compatible with the goggle?
Awesome review of the goggles. Will I be able to use the lumenier axii patch diversity antenna combo 5.8ghz (rhcp) on the Cobra X and Cobra v2 ? Thanks!
I have no idea. I haven't either but this is the place that the skyzone rep sent me for the upgrade parts.i think it's probably a retail store for skyzone.
@@TweetFPV thank you! I need to know this before I buy. Also, your link to the upgrade kit. There is almost nothing else on the site to purchase... Wanted to make the shipping more worth it and buy more stuff. You planning to expand options?
Hey, could you check the saved file input and confirm that it actually records at 720p resolution and 60 fps? I recently bought this and it records 720 x 576 and 50 fps according to properties in Windows using the included receiver module.
When I bought those goggles I dont have any antena's on so I use my stock antena and the are so good I went at least 1.5km on those with a little bit disturbance but those are so good I didn't expected that
You can't compare the two. Ones a box goggle and the other are a binocular style goggle. But if I had the choice I'd take the hd3 just because I like the Compact design.
@@TweetFPV Hmm ok. I'm in the position to either get a second hand pair of hd3s with Furious True D receiver or the cobra X. I'm a bit of a fov hog so the 50 fov is appealing and the cobras are small enough for me to not mind the difference between the two. Inevitably it all comes down to the reception of the two. Have you tested the True D receiver?
OK, before finishing the video, I'm going to predict that you did not test the HDMI input latency, which is one of the biggest remaining questions about this product but for some reason all of you avoid it.
What scenario would you be using the hdmi input where you are concerned about latency? Let me know and I'll see if I can get and answer for you. No one has asked that question of me.
That's what I was thinking. It will be interesting how they compair to the fatshark scout HD goggles. I have a shark byte system. I guess that would be a good platform for latency testing.
@@TweetFPV On paper I would easily rather have these than the FS Scout HD, it's just that question remains unresolved. The other technical issue is it appears the Cobra X/Steadyview module seem to operate in a mode that might not be completely pin compatible with normal modules; the manual seems to indicate having to specifically switch modes.
You need to emphasize the camera rolling issue - and how to find known good cameras, like Caddx rattel 2 which is going to work with it.
Usually they do a almost white version of these as well, I have the V1 cobra X in white for the exact reason you mentioned - heat in summer. The power management is what the V1 should have been, at least its fixed on V2! A good 18650 3000mah Panasonic cell only goes for about 20min on V1 so seeing it go to 1hr for V2 is great. Just want to emphasize that this is a really nice unit if you wear glasses or want a set you can pass to anyone standing by to have a look at what FPV is all about. That DVR looks so good btw.
So i have an issue with the DVR being way darker compared to what i see in my glasses when i'm flying do you have any idea what does that? I've tried googling it etc, but not been able to find anything on it.
Awesome flying and review, Dan! 😃
Pretty impressive goggles indeed!
Stay safe there with your family! 🖖😊
Thanks for the detailed take down and re-build...a google saver. I like my upgraded Cobra V1 to V2. My only challenge is getting it to be comfortable and in focus. I put DJI foam on it, but it is a bit thick and I wear reading glasses. works well. I will eventually make replaceable lens where to stock lens fits. Skyzone, you could make us a handy lens set.
I love my cobra v1. Ill deffinetly upgrade them woth the new boards. So far im super happy with the purchase, for the price u seriosuly cant beat it, unless u get a great deal on somthing used u aint beating them, IMO.
is there a upgrade kit? I can't find it.
Here’s a link to parts.atomrc.com/products/skyzone-cobrax-v2-dvr-upgrade-kit
If only someone would have put the link to the upgrade parts in the video's discription......
@@TweetFPV I contacted sky zone and if there are parts available to upgrade I’ll post a link.
The rolling screens issue I’ve only had one camera and switching to diversity was the solution.
Tweetfpv,Have you tried Scout box goggles?Im just curious how they compare.
@@TweetFPV what the man making the informative videos said. Lol
Have they decreased the latency in this upgrade?
hi, so in dvd its noticeable. but in live actual viewing cobra still is better? still thinking if im going to EV800D
Hello, please help. I bought this goggles, then I bought a high discharge 60A 18650 (40A continous). My question: is it safe for the goggles? I'm afraid to test
Yes you are safe. The discharge rating does not matter if it's too hight. The goggles will only consume the amount of power that I needs.
@@TweetFPV thank you. I bought the battery since it has 3500mAh capacity
Does anyone know if the Skyzone Cobra V2 HDMI In works with the DJI HDMI out Smart Controller? If I purchase the Skyzone Cobra V2 can I view in the goggles what is on my DJI Smart Controller with the HDMI In?
Don't use a 18650 because the goggles are already too heavy. The V4 is super!
I have them. I'm not wearing any glasses. However, they sit very awkwardly on my face... Do you have any suggestion how I might improve it out assuming my face will remain the same?
where i can buy new module of skyzone cobra x V1?? the signal just crop around 5inches. i think i need to buy new?
Is there anyway to retrieve a copy of the firmware files that the goggles are running? I "upgraded" my Skyzone Cobra X V2 to the "newest" version of DVR firmware from Skyzone's website, but it took me from 2.00.00.10 down to 2.00.00.09. If it is retrievable, I would very much appreciate a copy of the the 2.00.00.10 firmware 😬
It's not that I love box goggles, but if you need to wear glasses in your goggles these are a good option, probably the best.
For sure. I always forget about corrective lens wearers.
Totally, heavy astigmatism here
I only wanna joint hobby buy if i understand it well its not only good because of glasses but also because of cheaper price / manufactiring price... Thats why i thinking about these... Good reciever=range and image for good price... Did i get right? Or is there something better for me outhere?
These are good starter goggles.
one other question , the HDMI input is not a full size HDMI .... do you know whether it is mini or micro ?
it is a Mini HDMI port
Hi will this work with dji mavic air 2? I'm trying to find a fpv goggle. Thanks
Most likely not unless you have the DJI smart controller that has the ability to have an HDMI out signal .
I wear glasses so these are my daily driver but I might order the v2 sometime this year and keep my daily driver cobra x for passengers 😎🤙
I bought a Top RC Spotter V2 FPV camera/transmitter with a cloverleaf antenna. Should I be using the LH or RH CP Axiii antennas to replace the ones that came with the Skyzone Cobra V2 fpv box goggles? I am new to the hobby and know very little yet.
It's going to depend on which antenna is on your transmitter. Most of the time the tx if it isn't linear it's going to rhcp. You can usually tell from the product documentation. If they don't list it you can look at the antenna lobes from the top down and if it appears to make a upper case "R" shape then it's rhcp.
@@TweetFPV Wow, that was fast, thanks. The documentation that came with the camera/transmitter does not specify and actually states the product might come with a whip or cloverleaf antenna. Mine came with a 4 lobe cloverleaf. looking down on the antenna it appears the high point of the lobe is on the left and it slopes downward to the right.
Based on a video I just looked at it appears that this is actually a LHCP cloverleaf design. Please let me know if you agree or disagree based on my description above. Thanks for your advice and guidance.
It's always hard to tell without looking at them. This website has a good resource antennabasics.com/rhcp-vs-lhcp/
Does the Cobra X V2 take SMA or RP-SMA antennae?
The module that comes with the Cobra X V2 uses SMA antenna connections.
What antennae would you recommend for these goggles?
These are great. But just about any circular polarized long antenna will work well www.racedayquads.com/collections/rhcp-antennas/products/foxeer-lollipop-v3-5-8ghz-10cm-long-range-sma-antenna-2-pack-rhcp-choose-your-color/?aff=52
Can u use headphones with these as u said a audio cable was included?
Just looking at the standard video connector pinout, it should work.
Actually no I don't think it will work. It is an AV input, not output. Yes pins may be correct etc, but it's expecting audio in, not putting anything out..
Hi TweetFPV, would these be an upgrade over the skyzone 02x for image and reception quality? Also I feal these would probably be a better fit fit for my face type.
It would be an upgrade in that sense but flying in box goggles is a whole different experience than traditional goggles. I'd try a set of box goggles first before you buy them. To me the aspect ratio is wierd.
Sir, is there a chance to 3D print a form for a lense to push it closer to eyes or the construction is solid and it is almost impossible?
Anything is possible but I haven't seen anything like that specifically for these goggles.
Hey do you get much fogging with them? I don't think they have a fan correct?
I haven't noticed foggin. But then again I fly orqas and it's forced me to breath differently because their fan sucks.
@@TweetFPV Cool thanks for following up to my question :)
please deeper test it. I have Skyzone Cobra X v1, and i think it reduce FPS (in live fpv mode). It is not 60/50fps livestream from quad. in my opinion it showed to 25/30 fps. image not smooth like a another analog fpv goggles.
You need to be a little clearer. You have the V1's with the upgrade? Or do you want to know more so that you can upgrade?
The DVR works behind the receiver and if you getting 60fps send the 30fps DVR only captures every second frame.
I have a set of the V2 in white coming from Bangood for $170.00 with a coupon!
I'm at an estimated 50 hours on my Cobra X V1. Like them a lot. Thanks for comparing the DVR with the Orca. I think the upgrade kit is worth to buy. Both the DVR improvement and an extra 20 to 30 minutes (original running time 35-40 minutes on a 1S3000 18650).
The battery life on the original was too low to be "comfortable" and it cut out pretty much immediatly. So I designed and printed myself a bay for 21700 5000mAh that fit (barely) in place of the original battery bay. Just upgraded to V2 and testing how long it will last on 21700 :-)
@@Przemo-c Do you notice the difference in weight, around 25 extra grams, in front of your nose? Tomorrow I'll get my V2. I'll use my V1 for long distance with 150 mm Pagoda and a 4S5000 21700 pack, that will last a very long day. The V2 will be used for flying whoops and 3" around the house, without the hassle of external batteries. Should last for 1 hr, and changing for a full 18650 takes 15 seconds. Your 21700 5000mAh should last for 1h20min I guess?
@@ApappieK It does feel slightly heavier. But i didn't see it affecting comfort. And I don't notice it when flying. It lasted about 2h 30 min before battery low warning popped up. And then it worked fine for 10 min but it was starting to brown out. This is with medium illumination dvr off and fan set to 15. And the browning out wasn't total screen out and in. It was momentary partial blinks. More than enough to bring a quad back! One thing about my adaptation for 21700... it's tight. Hard to swap out. But with that runtime it's more than enough. I'll probably try tommorow with max illumination and DVR but I bet it will still be more than enough as it was pretty good on the V1.
Hello! Great review! I’m looking into getting the Skyzone Cobra X goggles and wear rather wide glasses. Do you know what maximum width glasses frame that’s compatible with the goggle?
Sorry I don't. I have them and can measure the width for you but I won't be able to untill Jan 1
ok I'm home and temple to temple they are 154mm wide. inside of the goggles where the lenses is the dimensions are 120x41mm.
Awesome review of the goggles.
Will I be able to use the lumenier axii patch
diversity antenna combo 5.8ghz (rhcp) on
the Cobra X and Cobra v2 ?
Thanks!
I'm a little late, did they work?
Hi, thank you for the video review!
Which antennas would you recommend with these goggles?
I prefer the Axii antennas. I typically run the long ones to get the sensing element above my head.
@@TweetFPV Thank you for the answer. Ordered the double Axii antennas.
Ah ha, Thanks. I have never done business with Atom RC. There shipping from China efficient?
I have no idea. I haven't either but this is the place that the skyzone rep sent me for the upgrade parts.i think it's probably a retail store for skyzone.
Its their drone line store
My HDMI input is not working with the Skyzone Cobra X goggles. Anyone faces same problem?
If I buy the upgrade kit... do I use the V2 firmware updates or the V1 firmware updates?
Excellent question, I'll ask my contact at skyzone.
@@TweetFPV thank you! I need to know this before I buy. Also, your link to the upgrade kit. There is almost nothing else on the site to purchase... Wanted to make the shipping more worth it and buy more stuff. You planning to expand options?
What do you mean expand options?
@@TweetFPV there are only about 10 things to purchase...
Oh, it's not my site.
That v2 sticker in thumbnail in orange you added or it's like that only in entire video I couldn't see side view
I just added it to the thumbnail. There is no "V2" sticker on the goggles
There’s a v2? (I’m new to this)
Yes, link in the video discription.
Hey, could you check the saved file input and confirm that it actually records at 720p resolution and 60 fps? I recently bought this and it records 720 x 576 and 50 fps according to properties in Windows using the included receiver module.
Sorry it took so long to get back to you. The DVR file from the goggles are 720x480 60 fps at 9984kbps according to windows.
Thats NTSC maybe, switch to PAL if possible and you get the resolution mentioned.
great vid buddy thanks eh...
When I bought those goggles I dont have any antena's on so I use my stock antena and the are so good I went at least 1.5km on those with a little bit disturbance but those are so good I didn't expected that
That's really surprising. The included antennas are generally not very good at all.
@@TweetFPV what is your suggestion for antenna upgrade?
Anything in a circular polarization pattern from truerc, luminer, foxier,
Does it use RP-SMA or SMA antennas?
Sma
@@TweetFPV thanks!
why " unprotected " 18650 battery ?
The are the correct dimensions and you don't want the chip in the 18650 controlling anyyhing. Let you or the goggle do that.
At this price point I don't think that you can get any better.
These are useless if you use mac OS, unless you format the SD card using the mac, to MS-DOS.
Hopefully that info helps someone
Good to know.
Thanks yo
Yes. This is indeed a pro tip.
How do these compare to the fatshark hd3?
You can't compare the two. Ones a box goggle and the other are a binocular style goggle. But if I had the choice I'd take the hd3 just because I like the Compact design.
@@TweetFPV Hmm ok. I'm in the position to either get a second hand pair of hd3s with Furious True D receiver or the cobra X. I'm a bit of a fov hog so the 50 fov is appealing and the cobras are small enough for me to not mind the difference between the two. Inevitably it all comes down to the reception of the two. Have you tested the True D receiver?
True d can not even begin to compair to the module that comes in the cobra x2
@@TweetFPV Ok cool. thanks man
@@madladdan how would you use that module with the cobra X goggles?
OK, before finishing the video, I'm going to predict that you did not test the HDMI input latency, which is one of the biggest remaining questions about this product but for some reason all of you avoid it.
What scenario would you be using the hdmi input where you are concerned about latency? Let me know and I'll see if I can get and answer for you. No one has asked that question of me.
@@TweetFPV These goggles are probably the best candidate to bridge from analog to Shark Byte.
That's what I was thinking. It will be interesting how they compair to the fatshark scout HD goggles. I have a shark byte system. I guess that would be a good platform for latency testing.
@@TweetFPV On paper I would easily rather have these than the FS Scout HD, it's just that question remains unresolved. The other technical issue is it appears the Cobra X/Steadyview module seem to operate in a mode that might not be completely pin compatible with normal modules; the manual seems to indicate having to specifically switch modes.
@@TweetFPV - Would love to see you do a video connecting Cobra X to HD zero and reviewing the set up.
llol i was so sure of myself boy was i wrong....lol