just my initial thoughts on the chassis before I run it on the track and yes I made a mistake in installing the shocks but again this is pre running haven't ran hit yet
Great Vid , Just one thing , The spacers at the rear of the chassis are not for adjusting toe angle , You need to keep those equal as per manual. To adjust the toe angle use the four screws in the oval holes that attach to the carbon fibre rear arms to adjust toe angle on the MD 1.0 and 2.0 , if you push the screws out in all four holes towards the wheels its 1.0 of toe , which is the stock setting , but check the manual for an example of the three settings you can use. I look forward to more uploads , Keep up the good work
Great Vid , Just one thing , The spacers at the rear of the chassis are not for adjusting toe angle , You need to keep those equal as per manual.
To adjust the toe angle use the four screws in the oval holes that attach to the carbon fibre rear arms to adjust toe angle on the MD 1.0 and 2.0 , if you push the screws out in all four holes towards the wheels its 1.0 of toe , which is the stock setting , but check the manual for an example of the three settings you can use.
I look forward to more uploads , Keep up the good work
thank you for the advice. I will make sure to look into it more