the grips will fit. They just need to be dipped in hot boiling water for about 30 seconds or more. It will allow you to slide it over the magwell. Just like the Hogue Grips..
Those brass catchers work pretty good but even on a name brand one the hot ass brass started to degrade the material, and it also causes jams now and then when a case gets stuck part way out of the ejection port. I have a Law Tactical folder (expensive piece for what they are...) that one you got looks like a direct copy basically. I wonder how tough it could be. Put it through the wringer before you trust it. They are handy on an AR pistol, makes it super small to toss in a smaller backpack or something.
Great video. Thanks for the info. Try the folding adapter and review it. Id like to know how it holds up in comparison to the sylvan arms and law tactical folders. I have both and they are both atleast $150-$300. If its comparable id like to try it on a build.
for those grips, try heating them up a little with a hair dryer but be careful not to melt it, and they should stretch a little more there not easy to stretch at all you gotta really put some muscle into it, I’ve had them, hope this helps!
@@franciscodiaz951 your better off getting some real stick on grips bro “talon grips” are great and what I have on my carry and “handle it” grips are good brand too 💯 hope this helps
i bought one of the folding stock adapters and it broke before i could install it so i returned it and got a new one, then that one broke right after i installed it, the peice that broke on both are the button to fold it and the medal piece that latches it
I have the AR trigger pin anti walk sets work great 2 sets AR rifle and pistol shoulder pad for rifle sling plus a red anodized red castle nut on stock mag pouch 😊
Might I suggest..... next time read the product description the AR folding stock assembly is for a toy model. As indicated in the description... also you would need to soak the grips in hot water then I'm certain they'll be stretchy enough just like any other grip... Even so you get what you pay for nothing really cost you crap nothing's really worth a crap
I like the video, but everybody’s doing the cheap small stuff. I’d like to see a gun safe, or some of the bigger stuff. I think there’d be a lot of views for something like that, cause there isn’t any on UA-cam hardly. Anyways, still like the video.
That's exactly what I'm trying to find. I've got my eye on a 7 rifle safe and a biometric nightstand handgun safe which are currently selling on Temu for $90 and $50 respectively. I'd just like to see a video review before I buy.
Yo I just subscribed cuz I just watched this video you have everything I have lol. The grips you can stretch them but I ripped one but you can get one on. I have one on a Taurus g3c. Love the video big guy much love from Jersey
Yu said wat i think about that ankle holster?? I think its trash since you prolly cant even touch yo ankles without sitting down or hitting one knee lol 😂
DO NOT PURCHASE the folding stock adapter!!! It immediately failed! It's made of soft pot metal. The locking lug for the hinge bent within a couple of minutes. Then, the threads made it impossible to remove. I had to cut it off the gun. Straight up, don't do it.
That grip looks like a knock off of a hogue grip. If it is , you have to put it in boiling water. To soften it up and let it stretch. . When it cools it will form to the gun.
Do not s buy anything from TEMU. Unless you want to support child slavery and worker mistreatment. And what's the point in saving money if the products are complete crap and ya constantly replacing it. That does not save money.
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
With the rubber grips, the instructions normally tell you to put them in boiling water for a few minutes to soften the rubber
Thanks I got them on
🎯🎯🎯
To get the grip on the 19 you have to flip it inside out, then flip it back while on the gun!
Thanks
This is what I did it's still ripped a little bit. I don't think the grips are the way to go my guy
🎯🎯🎯
the grips will fit. They just need to be dipped in hot boiling water for about 30 seconds or more. It will allow you to slide it over the magwell. Just like the Hogue Grips..
Yeah I got them on, thanks for the advice
🎯🎯🎯
Those brass catchers work pretty good but even on a name brand one the hot ass brass started to degrade the material, and it also causes jams now and then when a case gets stuck part way out of the ejection port.
I have a Law Tactical folder (expensive piece for what they are...) that one you got looks like a direct copy basically. I wonder how tough it could be. Put it through the wringer before you trust it. They are handy on an AR pistol, makes it super small to toss in a smaller backpack or something.
Yeah I’m gathering parts now to do a budget build with the folder and see how it holds up
🎯🎯🎯
Great video. Thanks for the info. Try the folding adapter and review it. Id like to know how it holds up in comparison to the sylvan arms and law tactical folders. I have both and they are both atleast $150-$300. If its comparable id like to try it on a build.
Thanks, I’m planning a new build and waiting on a few parts I will install it and do a video on it
i've tried a few of the temu folding adaptors and all of them have either broken or just not worked at all
@@AR-AK i kinda figured thats what would happen. Thanks for the reply.
🎯🎯🎯
for those grips, try heating them up a little with a hair dryer but be careful not to melt it, and they should stretch a little more there not easy to stretch at all you gotta really put some muscle into it, I’ve had them, hope this helps!
Ok thanks I’ll give it a try
Thanks for the advice, put it in some hot water for a second and it went right on
@@StrappedNasty glad to hear 👍
Follow up video for the grips?
@@franciscodiaz951 your better off getting some real stick on grips bro “talon grips” are great and what I have on my carry and “handle it” grips are good brand too 💯 hope this helps
You have to heat those grips up with a good hairdryer or a heat gun kind of like you would put a new steering wheel cover on
Thanks I got them on
🎯🎯🎯
🎯🎯🎯
i bought one of the folding stock adapters and it broke before i could install it so i returned it and got a new one, then that one broke right after i installed it, the peice that broke on both are the button to fold it and the medal piece that latches it
Thanks for the insight I’m not sure if I will install it
Same here! Total crap!
Buy a cheap polymer ar-15 lower and install the ar folder and make it a temu ar build series
Thanks that’s a great idea, stay tuned
🔥🔥🔥
🔥🔥🔥
I enjoyed your video, I would suggest turning the music down or off.
Thanks , I didn’t realize the mic was picking it up I had it turned down really low. I’m new to filming but i know now to have it turned off
🔥🔥🔥
I got that folding stock adapter. It works. Haven't shot it yet but it seems legit.
I think ima install it soon
Mine was trash. Didn't last 10 minutes of testing.
🔥🔥🔥
I have the AR trigger pin anti walk sets work great 2 sets AR rifle and pistol shoulder pad for rifle sling plus a red anodized red castle nut on stock mag pouch 😊
How is everything holding up
🔥🔥🔥
Might I suggest..... next time read the product description the AR folding stock assembly is for a toy model. As indicated in the description... also you would need to soak the grips in hot water then I'm certain they'll be stretchy enough just like any other grip...
Even so you get what you pay for nothing really cost you crap nothing's really worth a crap
Thanks for the suggestions I got the grips on
🎯🎯🎯
🔥🔥🔥🔥
🔥🔥🔥
@@Streetvetrecords 🔥🔥🔥
Strap Nasty you got yourself a subscriber for sure my brother
Thanks
🎯🎯🎯
I like the video, but everybody’s doing the cheap small stuff. I’d like to see a gun safe, or some of the bigger stuff. I think there’d be a lot of views for something like that, cause there isn’t any on UA-cam hardly. Anyways, still like the video.
I’ll definitely look into some bigger items, thanks for your feedback my friend
That's exactly what I'm trying to find. I've got my eye on a 7 rifle safe and a biometric nightstand handgun safe which are currently selling on Temu for $90 and $50 respectively. I'd just like to see a video review before I buy.
🎯🎯🎯
The rubber grips are that small. Stretch them on. It is so they don't move.
Thanks for the advice I soaked them in hot water and got them on
🔥🔥🔥
As far as the grips toss em' in some close to boiling water for 1-2 mins
Thanks for the advice I got them on
🔥🔥🔥
Yo I just subscribed cuz I just watched this video you have everything I have lol. The grips you can stretch them but I ripped one but you can get one on. I have one on a Taurus g3c. Love the video big guy much love from Jersey
Thanks much appreciated
🔥🔥🔥
I got that same shell catcher 😂🤣umma see if it really works
Yeah it works
Big Smoke GTA SanAndreas 💀
🎯🎯🎯
🔥🔥🔥
I bet that shell catcher burns through on the first eject.
I thought the same thing but it has held up
🔥🔥🔥
🎯🎯🎯
Bro were you from bumping that rich the factor
913
Kc is the town
Big man for your next video definitely try out the body armor lol they got vests
Ima have to look into the vests
🎯🎯🎯
Folding would probably would with light ammo like 9mm or 22 ar
🎯🎯🎯
@@StrappedNasty fr I cant be that bad maybe even 556 with certain buffer and spring
@@Cos..... I’m going to do a cheap build with it
@@Cos..... I’m going to do a cheap build with it to see how it holds up
@@StrappedNasty nice ready for it
how do you get the tip of the gun to be black? please tell meeee
It’s a black gun
Congratulations man keep it up good video
Thanks
Great vid
They probably would fit a Glock, but you don’t have any Glocks
🎯🎯🎯
🔥🔥🔥
@@phillipnelson2092 got plenty glocks
Why he sound like shaq?
Diesel
Heh? @@StrappedNasty
@@GLITCH2778. Shaq diesel
@@StrappedNasty oh
@ 🎯🎯🎯
Cool
🔥🔥🔥
@@Streetvetrecords🔥🔥🔥
🔥🔥🔥
🔥🔥🔥
Those grip sleeves need to be heated up good to stretch
Thanks I got them on
🔥🔥🔥
You have to soak the grips in hot water to stretch
Thanks I got them on
🎯🎯🎯
❤❤❤❤
🎯🎯🎯
🔥🔥🔥
🔥🔥🔥
How much does it cost maybe next time you could throw in the prices to see if they’re worth buying
Go watch it again the prices and descriptions are posted after every item
🎯🎯🎯
Yu said wat i think about that ankle holster?? I think its trash since you prolly cant even touch yo ankles without sitting down or hitting one knee lol 😂
🎯🎯🎯
🔥🔥🔥
😂😂😂
😂😂😂
@@Streetvetrecords 🔥🔥🔥
Take the mag out.
Buuut? Is there a pt 2 to try all 2 c how it works?
I got the grips on by hearing them up never installed the folding stock adapter just don’t trust it
🎯🎯🎯
🔥🔥🎯🎯
🎯🎯🎯
🔥🔥🔥
Should prolly turn all that noise off in the background
Why
🎯🎯🎯
🔥🔥🔥
🔥🔥🔥
DO NOT PURCHASE the folding stock adapter!!! It immediately failed! It's made of soft pot metal. The locking lug for the hinge bent within a couple of minutes. Then, the threads made it impossible to remove. I had to cut it off the gun. Straight up, don't do it.
Thanks for the insight, I never installed it it just seems poorly made
While it may not be suitable for an ar-15,it might be usable on buffer tube adapters for something like a lil 22 range toy or something 🤣
@@ScarecrowShoots I’ll do a budget build with it just so we can see how it holds up
@@ScarecrowShoots nope. It's crap. It's not about the caliber. It's about how soft the metal is.
That grip looks like a knock off of a hogue grip. If it is , you have to put it in boiling water. To soften it up and let it stretch. . When it cools it will form to the gun.
links ????🔗
TEMU😂
lol
Ankle holster totally unsafe. Soft side allows trigger to be accessed through the fabric.
🎯🎯🎯
🔥🔥🔥
Oh yeah the brass catcher will have a stove pipe
I haven’t had any malfunction so far
@@StrappedNasty nice 👌 👍 blessings
8:30 for toy Model
Its probably meant for AirSoft
Yeah I wouldn’t trust my life with it
🎯🎯🎯
😮😮😮
🎯🎯🎯
🎯🎯🎯
🔥🔥🔥
TEMU Gun accessories are GREAT IF YOU HAVE TOY FIREARMS ...,
I "Re-Gifted" EVERY HOLSTER TO MY NEPHEW FOR HIS NERF and TOY GUN COLLECTION ..., 😩
🎯🎯🎯
Magnifier's are decent 👌
Yooooooo
🎯🎯🎯
🎯🎯🎯
Hollo ❤😊😮
🎯🎯🎯
🔥🔥🔥
🔥🔥🔥
Do not s buy anything from TEMU. Unless you want to support child slavery and worker mistreatment. And what's the point in saving money if the products are complete crap and ya constantly replacing it. That does not save money.
I haven’t had to replace a single thing, actually I buy a lot of useful things from Temu that have lasted well past what I paid for them
The products probably last longer than the child slaves that work for them.
We don’t care
Your phone is using colbalt mined by African children who are starving. Selective Fake outrage
😂😂😂
Are you able to speak normal english language? 😂 greetz from germanyyy!❤
It’s not my native tongue
I understood everything this man said go back to Germany with your bulshit
🎯🎯🎯
🎯🎯🎯
🎯🎯🎯
Yooooooo
🎯🎯🎯
🎯🎯🎯