PROBANDO RECEIVER MCS- 3235 ( VINTAGE )

Поділитися
Вставка
  • Опубліковано 27 жов 2024

КОМЕНТАРІ • 12

  • @larryzaldivar5181
    @larryzaldivar5181 Рік тому +1

    How much

  • @stewarthill8165
    @stewarthill8165 3 роки тому +1

    Hello there, I have this same model receiver but it trips the over current protection as soon I power it up, any idea's on what may cause that? Thanks much

    • @kimberaudio
      @kimberaudio  3 роки тому

      Hello, the safest thing is that they are your audio outputs, I suggest you give it an internal cleaning since sometimes the dirt causes it to make false contact, I also suggest you check your speaker cables.

  • @alvarogore4016
    @alvarogore4016 10 місяців тому

    Que. Tan. Cierto. Es. Que. Esta. Marca. La. Hizo. Sansui????

  • @duckthis17
    @duckthis17 3 роки тому

    Well thanks to your video I bought one. Just have to finda volume knob for it. What brand of speakers and how many would you recomend ? Or what are you using. It sounds great. Thanks for your help.

    • @kimberaudio
      @kimberaudio  3 роки тому

      Hello, what a pleasure for your purchase it is a very good receiver, in the video it was tested with some DCM-PRK-X10 speakers, good quality, I do not know if you are from the USA, you will find them very easily, or you could also put some TECHNICS of 3 Vias, they are very good, you will not have problems with the omhs since this receiver works from 4 to 16 omhs without problem ..

    • @duckthis17
      @duckthis17 3 роки тому

      @@kimberaudio Thank you, Do you use amplifier with your set up ?

  • @duckthis17
    @duckthis17 3 роки тому

    Sounds good. how many watts is it ? Thanks for posting

    • @kimberaudio
      @kimberaudio  3 роки тому +1

      hello this model is 35 watts per channel ..

  • @duckthis17
    @duckthis17 3 роки тому

    Being you can hook up 6 speakers to this unit,what would you recomend for speakers and their wattage ? Would 100 watt floor speakers be to much for this unit to run ? I'm a newbie and appreciate your reply. Thanks

    • @kimberaudio
      @kimberaudio  3 роки тому

      Those of 100 watts you work without problem, you could work 2 pairs and the third pair would already be smaller so as not to force the receiver.

    • @duckthis17
      @duckthis17 3 роки тому +1

      @@kimberaudio Thank you.