Making tesla coil for wireless electricity
Вставка
- Опубліковано 2 гру 2022
- Link to full video: • How to make tesla coil...
Hello fiends,
In today's video, we are going to learn to make a tesla coil for wireless transfer of electricity. A Tesla coil is an electrical resonant transformer circuit designed by inventor Nikola Tesla in 1891. Tesla coils can be used for wireless transfer of electricity. It is used to produce high-voltage, low-current, high-frequency alternating-current electricity. A fluorescent lamp lights up when brought near the tesla coil. This is due to the flow of electrons in the lamp which is caused by the high voltage generated by the tesla coil.
Parts needed for making tesla coil
1. 2N2222 NPN transistor
2. Enameled copper wire , 20-28SWG, 10 metres length.
3. 2.2 kilo ohm resistor
4. 9V battery
You can watch this video and learn step by step, how to make a tesla coil.
❤❤❤Please SUBSCRIBE to channel, if you like it❤❤❤
Watch my other videos below...
Bluetooth controlled car with lights & horn : • How to make a Bluetoot...
Electricity from mud : • Electricity from mud |...
#how to make tesla coil #tesla coil experiment #tesla coil diy #tesla coil model #how to make a tesla coil at home #tesla coil for school project #tesla coil circuit #tesla coil for wireless electricity #tesla coil project #teslacoil #scienceproject #diyprojects #diy - Наука та технологія
Link to full video:
ua-cam.com/video/flbcheY7sBo/v-deo.html
❤
Hi
@user-yo6hc4op2o Hi friend..
Bro I will use 36 geage copper wire
Okay friend. That will also work..just make atleast 250-300 turns of coil..
Slayer exciter! Gotta love the em! It does some amazing things. Great work 💯
Thank you..😀
Wonderful bro
Thank you so much..🥰 Please subscribe if you liked the channel..Thanks..🙂
Ljj
Link to full video :
ua-cam.com/video/flbcheY7sBo/v-deo.html
.This is a slayer exciter circuit ❤❤❤❤😂😂😂😂🎉🎉🎉🎉😢😢😢😢😮😮😮😅😅😅😊😊😊😊 bro.
Yes..you are right!!!
YourWelcome
Hi, do I have to use a copper wire coil? Can aluminum coil work?
Hi friend. I am not very sure about it. But I have heard aluminium wire also would work just fine. It should be insulated aluminium wire though.
If it true then have you tested the radiation levels? Charged particles/ions could damage living things.
Hi friend. If the powerlevels are huge then what you told is correct. But the tesla coils that we make dont have much power to cause damage to living things. That is what I have read. But I don't have equipment to measure the radiation levels.
@@Science_4U_ Ok. Thank you for the update.
How much thickness of wire is used
Hi..I used 24 swg wire. That is having a thickness of 0.51 mm.
Ok
It doesn’t matter for such a circuit, but I use 34-36 awg for my coils
@@tinkeringwithhighvoltage Yes..that is correct..
.
Is this designed for wireless power transmission or is it designed for arcs?
It is designed for wireless transmission only. This tesla coil is not powerful enough to generate arcs.
@@Science_4U_do you want arcs?
No..I didnt make it powerful enough to make arcs.
I recently made it but it's not working
Is it necessary to make Primary coil with aluminium wire?
No friend. The primary coil can be made with any insulated wire. This circuit drains battery very fast. So you have to connect a high capacity battery. Also try with another transistor..
@@Science_4U_ can u watch where is the mistake I can send photo of my Tesla coil
@@diljeetsingh3446 okay friend..please send photos..
@@Science_4U_ u have WhatsApp?
Can you please send photos to my instagram account..
instagram.com/_science4u_?igshid=MzNlNGNkZWQ4Mg==
Why is it necessary to put the aluminum foil ??...please someone explain me..
To my understanding, it is only to spread the high voltage to a larger area. So that the bulb will lightup from whichever direction we are bringing near the tesla coil..
@@Science_4U_ Thanks alot..
How does a 9 V DC battery power 120 V AC light bulb
Hi friend. That is the principle of tesla coil. This coil has the ability to produce output voltages up to several million volts based upon the size of the coil. The Tesla coil works on a principle to achieve a condition called resonance. Here, the primary coil emits huge amounts of current into the secondary coil to drive the secondary circuit with maximum energy. The fine-tuned circuit helps to shoot the current from primary to secondary circuit at a tuned resonant frequency.
how many watt of CFL bulb used
I used 8w bulb for this project. But infact any watt of CFL bulb is okay. The bulb should have a flourescent coating which lights up when brought near the tesla coil. The high voltage in the tesla coil causes electrons to flow in the bulb and causes it to light up. CFL bulb has this flourescent coating and hence will work with tesla coil. So a CFL bulb of any watt will work.
@@Science_4U_bro please help me
I am making the Tesla coil for my project but it's not working
@@Science_4U_bro please help me once
It's very important
@@shiwanshsingh5106 Hi friend. Have you used CFL bulb only?. Also please check battery..The battery gets drained very fast in this circuit.
Please check transistor. Is it becoming hot?. If it is working properly, it should become hot.
Whay is the use of that transistor
The transistor acts as a switch. It becomes on & off at a very high frequency & converts the DC battery voltage to high frequency ac pulses at the coil. This high frequency voltage pulses only causes the CFL bulb to glow when brought near the tesla coil..
led bulb glow karega ya nahi
Hi bhaiya..LED bulb nahi glow karega..ye tesla coil ye bulb ka andhar rahna wala gas ko ionize karke jalatha hai.or bulb ka andhar ek coating hoga. Ismem electrons ban kar jalatha hai.. LED bulb ka andhar yeh dhonom nahi hai. Isliyeh LED bulb nahi glow karega..
What is the width of the pipe and how much turns of the copper wire?
The width of the PVC pipe is 1 inch diameter. Length is around 1 feet. You can make around 250 to 300 turns and it will work nicely. I made 300 turns of copper wire..
@@Science_4U_ can i use 10 cm long pvc pipe and around 150 turns in it?
@@ZeusxHighlights00 yes friend..150 turns will be okay..But I doubt whether 10cm will be sufficient for making 150 turns..
@@Science_4U_can i use pvc of 3 cm width and 20 cm long and 28 guage copper wire in it
@@ZeusxHighlights00 Yes..sure friend..you can surely use. Make sure you make atleast 250-300 turns so that you get very good amlification of battery voltage..
How can you convert dc to ac with just 1 transistor?...🙄
Good question friend. The transistor acts as a high speed switch. So when the current goes on and off in micro seconds it becomes like AC because it is now getting ON and OFF alternatively.So just like AC, there will be an inrease in voltage and suddenly decrease at a very rapid rate. Also, the small DC voltage is converted to large AC spikes of the order of kilo volts in this switching circuit, but will have only microseconds duration. This causes the electrons in the flourescent coating in the bulb to get energised and it glows.
@@Science_4U_
Can I make a Remote Control Car work from this???
@Studiouskid05 No friend. The remote control car will not get enough power from this circuit to run the car.
@@Science_4U_ what if I increase the power like instead of using 9v battery I use a 12v or 18v battery? Will now my remote control car can work??
@@Studious_kid05 No friend..It will not work. This tesla coil makes only short bursts of high frequency voltage pulses. That will be enough to excite electrons in the phosphor coating in CFL bulbs which makes it glow. But this short bursts of high voltage pulses cannot be used for running a car.
I guess I’m just gonna make a jacobs ladder…
Okay friend. That is also a very good project..❤️
I also hope it doesn’t burn down because I’m using solder wire and 400k volts (400000)
@sabrinaxin4361 Hmm..yes friend. You can give it a try. Be extremely careful when you are handling high voltages.
Actually it could be a bit higher voltage than that but maybe
Hi I’m back with a 300 turn coil!
Можно в три раза меньше сделать от 12 вольт работать будет
Да друг. это верно.🙂
Minimum turns of wire?.. Cam we take 200 turns of wire?..
Hi friend..200 turns also should work. But 250-300 turns will give more voltage and hence the bulb will light up more easily..
I think that i take 230-240 turns is it work easily?
@@saritabelwal6755 Hi friend. It should be sufficient..
My laser literally lit up a match
Wow. That is great friend!!!
How many voltage needed?
Hi friend..9 to 12 volts is required for the tesla coil to work properly..
At least it's not saying that's it's 'free energy' or some bs.
Yes. It is not free energy. It is only amplification of voltage by the tesla coil which causes flourescent bulb to light up when brought near it.
Yeah
Fake because in real bulb will not glow like that
Hi friend. This is 100% not fake . Please search in internet about tesla coil. This was invented by Nikola tesla in 1891.
Yeh I know that but check the way bulb is glowing and even the magnetic field of that coil looks like it came all of sudden look as far the object will go it will glow more weak but here it glow all of a sudden and I had too made Tesla coil but it consume lot of energy
@@BhagmaniDevi-hz7gg Hmm..okay friend. You can believe me if you want. You can watch the full video also. I am showing how I have made the tesla coil step by step. I think that will help you believe that what I have made is not fake.
@@Science_4U_ well I am not telling that Tesla coil can't be made but the way bulb glow made.....
Any way nice chatting with you thank you for your kind gesture
@@BhagmaniDevi-hz7ggOkay friend..🙂🤎
Sir can I use 20cm pcv pipe?
Yes sure friend. You can use 20cm lenght PVC pipe also. Just make sure you have atleat 250-300 turns of copper wire on it. Then only the voltage will get amplified for making the bulb glow..
@@Science_4U_ thankyou sir😊😊, a last question can I use 22 Ohm resistor instead of 2.2k resistor
No friend. 22 ohm is too less. Atleast 2.2 kilo ohm or 22 kilo ohm resistor is to be used..
@@Science_4U_ sir if I use 2 batteries so how many time this work because on 2 December my science exhibition so 2 batteries is enough?
@@Jethalal_gang Hi friend. This circuut makes the battery discharge very fast. Small 9V battery will last only for around 1 hour if we are continusly showing lighting up of the bulbs. I feel you can use a PC ups battery if possible. It will last for many days..
Resistor?
It is a 2.2 Kilo Ohm resistor friend..🙂
Probably hidden capacitor
No friend. Nothing is hidden. This project is 100% real. You can see other videos about tesla coil in youtube.
Yolgon men yasab koʻrganman ishlamagan
yo'q do'stim, agar to'g'ri bajarilsa, albatta ishlaydi.
Nicola tesla
Yes friend. The founder of tesla coil. He made this because he wanted to transmit power wirelessly using the tesla coil..
Light is battery light😂😂😂😂
No friend. There is no cheating in this. Bulb lighting up is only due to tesla coil..
I tried to do it but it does not work
It will definitely work friend. Make sure you use a well charged battery. Also there should be atleast 250-300 turns in the coil. Also try with another transistor..
But I do think it works
Pipe size?
Hi friend..I used 1 inch diameter PVC pipe..
Thank you
Kya isse kisi ko khatra ho skta hai?? Kisi ki jaan to nhi jayegi ?
कोई मित्र नहीं। हालाँकि आउटपुट वोल्टेज बहुत अधिक है, लेकिन करंट इतना छोटा है कि इंसानों को बिजली का झटका लग सकता है।
Uske hath ko dekho bulb par tuch kiya hai to bulb 💡 gowl hua hai
Hey friend. It is not fake. It is absolutely true. You can see the full video. Please search for tesla coil in internet..
Now only I am also noticing that. It looks like i am clicking a switch and the bulb is glowing. But believe me, it doesnt have a switch. This is pure physics. You can see lots of videos in internet. If you watch my full video, it will be very clear. There is nothing that I am pressing to make it glow..
Notise it! This is fake because He clicked on the bulb and turn on
No friend. It is absolutely not fake. This is a well known tesla coil circuit. Unfortunately, when the bulb turns on, it looks like i am clicking on a switch. But i am not doing amything. Please believe me.
You can watch the end of the full video at 8:45 minutes in the below link. Iam doing with another bulb also.
ua-cam.com/video/flbcheY7sBo/v-deo.html
Can we make with 10cm pvc pipe someone plz tell me😢
Hi friend, do you mean that can we make the tesla coil with 10 cm diameter PVC?
@@Science_4U_ NO, the length of pvc pipe is 10 cm
@@minogamer643 okay friend. It is possible. But the tesla coil works better if you have atleast 250-300 turns of coil in ot. It will be difficult to make this much turns in just 10 cm length of PVC pipe. That is the problem.
@@Science_4U_ ok , but what is perfect length of pvc pipe to make the working tesla coil
Which transistor and resistor can we use for making tesla coil
I also ran out of my piece of wire :(
How many turns of coil could you make friend?
Sorry but I did not keep track of it
@sabrinaxin4361 okay friend. No problem. Making tesla coil work is a little bit tricky. Make sure you use a very good battery with good AH rating. Use battery with atleast 9-12volts. Also bring the bulb nearby and rotate in different directions. At some instant, it will light up.
@sabrinaxin4361 Also, can you check whether the transistor is getting heated up?
Nope not hot
is is fake video!
plastic can't create electronic magnet
First learn grammar and it's not fake video
Hi dear friend. It is not at all a fake video..You can see lots of videos of tesla coil in youtube. I don't get anything by showing fake video.
It is not the plastic that creates electromagnet. The coil that is wound over the PVC pipe generates very high voltage pulses which causes the bulb to light up due to flow of electrons by the high voltage..
Thank you dear friend for supporting me..😀❤️
Fake 😂
@@ddbusgaming286 No friend. The truth is that it is not at all fake.🙂
Koi iske hand k press ko nhi dekh paa rha h🤣🤣
Jab project nhi bnana aata to bnata kyu h💩💩💩💩🤡🤡🤡🤡
Please watch full video friend and you will understand it is not fake. Please go and search in internet about "tesla coil".
Fake
No friend. This is absolutely not fake. Please watch the full video and you will understand...