Please reinforce the frame in the middle at the floor, because the Jogs are notorious for bending in half og just snapping on the middle when you wheelie them especially. but love the content keep it up
Hello you are my last resort, my scooter was running perfect, after a rain back home, next day, turn on easily revs high but doesnt move, i try, new spark plug, change cdi box, checked all the cvt clucth and variator, belt all good, check magnetic flywheel seen fine , since she starts revs high but doesnt move, looks like symptons of over rich but umpossible since she was riding perfect before that rain, a total mysteri to me, any advice or idea you have come across something like this, i can just assume that as the rain, but stange, best regards
What’s the trick to getting some mile an hour out of the scooters with the 70 cc bore kit and how much difference does the yasuni pipe make then a Leo pipe?
What's the trick for these scoots going so damned fast? I have a 1982 Honda Nu50 Urban express with a 70cc big bore kit, pipe, carb, belt and other stuff, and I run outta variator at 34 mph, run outta rpm at 45. Regardless, love the build! That's a sweet looking and sounding scooter!
I think you would really like a piaggio typhoon. They are super comfy, fast, have great seats and suspension for wheelies. Way better bike than a bugeye zuma imo. I have 3 bug eyes right now but I never ride them, just flip them to fund other builds.
I’m gonna need a ride a racing cylinder to see why everybody says not to do it. Because at this point it’s very attractive. Current setup: NCY 82 and V8 pipe
You can get a polini Schock block it makes you're scooter taller while you use the same shocks you can also adjust it. In dutch it's called polini ophoogblok. Maybe that helps
i know jogs and if i was you i would see if i could find a new front fork the one jogs have is not so good try an se if you could get at aprilia sonic one or just any other
Greetings, I have an aprilia sr50 (minarelli horizontal lc) and it doesn't pull as well as it should, I would like it to pull the two setups: Malossi mhr replica 70cc Malossi mhr variator Stage6 clutch Black springs in the clutch Red main spring 4.5 gram roller Dellorto 19mm carburetor Top performance shaft
Hi. Tell me why there is a failure during acceleration for 2 or 3 seconds, and only then the engine spins up. This is not a transmission. I know it's a carburetor, but what exactly is it? Ps: I use honda dio
might not be getting enough fuel on idle, or try tilting your carb inside the intake a bit to compensate for the wheelies, that’s what i do on my prebugs
finally a jog update, love to see it
yessir!
Neibors can’t say shit about loud sounds bro just mowing his lawn fr
2stroke god word Is bond man’s killing it every time 😤⚠️
Third lol
I'm on a moped kick these days, my stock 86 Jog will be up for sale soon. Hate to see it go, but gotta thin the herd a bit. Great build Trevor!
Thats been a problem with every Jog Ive owned, smackin the exhaust on the ground
Slightly longer shock helps a lot. Cant go much if running stock airbox.
Same here 🙂↕️
Every minarelli engine has this issue with stock shocks
Yoooo das craazyy clean. Cant wait for the fine tuning💯
yessir 💪 gears are gonna make a worlds difference
Agreed!
My 1987 jog has a 2fast 100 engine on it and goes 3.9 0-60. You should make a dragy video.
i hope you could make a video about Honda Zook and make it faster, more power and thanks
Fuck it looks so clean with that pipe 🤤
Please reinforce the frame in the middle at the floor, because the Jogs are notorious for bending in half og just snapping on the middle when you wheelie them especially. but love the content keep it up
good to know!
Your intro song sound like a song called "y de pronto un accidente y dio como resultado"
Love the bike u make the builds looks too easy keep it up
Finally been waiting for a jog update love the vids! keep it up
Insane 😅 I love it
Nice. I just got a new bike today ! and I fully built my genuine buddy it’s amazing now.
You should see if you can get a genuine roughhouse 2 stroke that’s what I have rn 💪
i had one years ago, that’s one of the first 2 strokes that was on the channel!
Day 1 of asking for 400$ to a new cylinder😢
Day 3 of saying No
Day 1 of no
Dude that is FUCKING AWESOME
Your vids have been a Inso for my channel. Looks like you need to be careful riding this one. Bonkers.
Hello you are my last resort, my scooter was running perfect, after a rain back home, next day, turn on easily revs high but doesnt move, i try, new spark plug, change cdi box, checked all the cvt clucth and variator, belt all good, check magnetic flywheel seen fine , since she starts revs high but doesnt move, looks like symptons of over rich but umpossible since she was riding perfect before that rain, a total mysteri to me, any advice or idea you have come across something like this, i can just assume that as the rain, but stange, best regards
I live in Las Vegas do yk where I can buy a sym
Do you guys have anything going on in Australia? I have a Jog CV50 and there’s some cool builds over here
Those things are weird to wheelie. Cuz they so small. Still sick ass bike tho
you konw that you can take a aprila sonic front fork and put it on your Jog, it works on a Yamaha Jog As.
then you also get disc brakes
What’s the trick to getting some mile an hour out of the scooters with the 70 cc bore kit and how much difference does the yasuni pipe make then a Leo pipe?
U know where i can buy zuma prebug? I live in the Netherlands but want one so bad because no one has it here.
Bro sick videos, but its time for an aerox
i’m in america
if the exhaust smacks the ground just flip the subframe the jogs have the same issue as an aerox
Doing that drilling to the frame doesn't mess with structural integrity?
damn the US headlight and cover is ugly compared to how it is around here
can you come to slovakia and make my scooter riping like you know best?
Holy Crap!!!! So nice, It's so perfect! ! such an awesome build so far! one of your best for sure 🤘
thanks man!
Are you running the original carburetor?
polini cp21!
That Scoot is sick! I am in the middle of building my Bugeye right now after watching your videos. Keep it up!
awesome man! thanks
Maybe you should make an 1/8 Miler and take it to the track. That'd be fun to see. 👍👍
I have an 1987 jog with a horizontal engine and it's a 2fast 100 setup goes 3.9 0-60mph and high 7's in the 8th mile.
Wish I could post videos or pics in these comments
50 seconds ago is crazy
Do you change the CDI for higher revs?
there’s no cdi restrictors on most 2 strokes
i have one what kinda electricity does it need cause i have none and i wanna fix it
try to make a lc one with 2fast or mount a pvl ignition to this one
What's the trick for these scoots going so damned fast? I have a 1982 Honda Nu50 Urban express with a 70cc big bore kit, pipe, carb, belt and other stuff, and I run outta variator at 34 mph, run outta rpm at 45. Regardless, love the build! That's a sweet looking and sounding scooter!
nice love the vids
thanks man!
bro what is the intro music called
I think you would really like a piaggio typhoon. They are super comfy, fast, have great seats and suspension for wheelies. Way better bike than a bugeye zuma imo. I have 3 bug eyes right now but I never ride them, just flip them to fund other builds.
I’m gonna need a ride a racing cylinder to see why everybody says not to do it. Because at this point it’s very attractive.
Current setup: NCY 82 and V8 pipe
whoever told you that lied to you bro haha. literally only cylinder i wouldn’t run is the ncy i promise
Hey I have a question do you know where I can find turn signals for a 2000 50cc zuma oem brand new or used but clean ??
FIRST
Damn! Thats sick Jog my dude. Im planning to pump up my Derbi Hunter in the future. Keep the good contend
Been waiting for your first ride reaction. My jog is what hooked me on scooters.
straight ripper!
You can get a polini Schock block it makes you're scooter taller while you use the same shocks you can also adjust it.
In dutch it's called polini ophoogblok. Maybe that helps
when are you doing 100cc 2fast or yamaha jog 125cc kit????
Is anyone know what engine is 2012 ningbo gtx ?
Those speedos peg at 55mph with OEM tires.
What stand is that?? Need one for mine.
just a jog side stand off aliexpress
I know what you mean with the small rippers. Swapped a fully built af16 in my spree 😎.
Dude..and here i ride with my stock chinese scoot😂really cool what u did there. subscribed!!!
The old jogs are Sick 🤩
Please do a build with 2 fast 100cc or 2 fast 70cc they are both very very fast
Hello from denmark i also have a jog as and 2 jog r the small jogs are quiet popular here some people put a 100 cc 2 fast aand more on them
Where do you order gears for minerali motors (beta ark 50cc LC)
Dannng who showed you the frame mod and city16? He must be a cool guy.
You did your thing on this one
💪
i know jogs and if i was you i would see if i could find a new front fork the one jogs have is not so good try an se if you could get at aprilia sonic one or just any other
yea and try to finds a taller shock ind the back it would rid much better
I love 2 strokes so much. It is so easy to make them faster as well. Great video. 😻😺🙂
wghat gearing do you plan to run? is there a gearing calculator somewhere?
Get a Vastro pipe it will hit even harder
Where did you buy the kickstand AND NICE JOG
alliexpress! thanks man
What exhaust u bought for the mk2?
Love to see it 🛵
Hate to see it end
Another banger bro
Greetings, I have an aprilia sr50 (minarelli horizontal lc) and it doesn't pull as well as it should, I would like it to pull the two setups:
Malossi mhr replica 70cc
Malossi mhr variator
Stage6 clutch
Black springs in the clutch
Red main spring
4.5 gram roller
Dellorto 19mm carburetor
Top performance shaft
I was thinking of putting a black stage6 main spring and white malossi springs in the clutch
PLEASE buy a 2005+ yamaha jog rr 2 stroke
they’re not in america sadly
The “Artistc Spec” head set is the best one for these jogs
To be honest i think it will be as fast as the f12 maybe faster depends on what gearing. Are you going up on speed or down with gears?
taller gears so more top speed
@@MOPBOYZ ye I think its going to be as fast or faster that the f12
put somw street handlebars
Hi. Tell me why there is a failure during acceleration for 2 or 3 seconds, and only then the engine spins up. This is not a transmission. I know it's a carburetor, but what exactly is it?
Ps: I use honda dio
could be too much fuel or not enough fuel , depends on if it’s a gargle sound or a deep bog
Do a Honda today build 🙏🏻🙏🏻
Fuel consumption? 😂😂😂
why dont u need to process the cylinder so it doesnt break?
cause this was an already running cylinder off my f12 , it’s not a brand new one
She looks sweet!
thanks dude !
Man I did it! I found a 1995 Honda elite sr! Got it and a 1989 elite e for $900, it’s time to start the af16 build!
awesome dude ! get r done
seit wann gibts scooter tuner in amerika
I need u to build me 1 bro
You should get the front end from a aprilia sonic the sonic front end has bigger forks as well as discbrake
i would def like better suspension front and back on this scooter, it sits way too low
i Love MopBoyz! another banger in the books
thanks my guy!
@@MOPBOYZ no, thank you mayn
Can i ask a question?
What gear are you putting in? What ratio
build a yamha slider
haha niceeeeeeee
What gears are you going to put in?
I want to buy Yasuni pipes. Where can I order them. ?
link in description !
@@MOPBOYZ thank you bro.
My vino had a filter that slides up into the tank, didn't look like one is there but might be
the jogs have a filter inside the stock petcock , but since i removed the petcock was left with no filter
yayyyy!!! new video is fire 💪💪
thanks bro !
Which cylinder is in the jog Right now?
stage 6 race cyl
What did qmb mean
Sooo sweet dude🙏
you can buy a raiser for your rear shock, makes it easier to wheelie aswell.
yessir , stock shock is still to soft tho. way too bouncy
I have a Yamaha jog and when i'm doing a coaster it stalls (because the big angle i think) how can i fix that?
might not be getting enough fuel on idle, or try tilting your carb inside the intake a bit to compensate for the wheelies, that’s what i do on my prebugs
I haven't tried tilting it yet. Thanks for your advice👍
I saw a banshee.
Nice dude!!!!