For anyone having issues with the second step bottom piston not extending. Remove the redstone by that piston (Check the video at 3:14, it's the redstone to the far right). Place a solid block there, and add redstone to the top.
This design surprisingly works in java 1.20.2 just you need to make sure the redstone dust at 2:07 goes into the piston with a target block beside it (or repeater or any redstone item which transmit signal directly to the piston) super tiny build and very impressive
1. Instead of placing the lever where he placed. Instead, trail redstone up a staircase you make leading back to the room. Using a button will be difficult, so just hide the lever in the room from the trail of redstone. 2. You wont be able to close it behind you. And you will be stuck if someone closes it behind you. Fix this by leading another trail of redstone from the original trail like a T, and lead it downstairs to where your hidden room is. Add a lever there.
This design surprisingly works in java 1.20.2 just you need to make sure the redstone dust at 2:07 goes into the piston with a target block beside it (or repeater or any redstone item which transmit signal directly to the piston) super tiny build and very impressive
For anyone wondering how to close it from the outside all u have to do is bring the redstone out 3 blocks from where u put your lever then bring it up to where you want the lever on the outside
SUPER IMPORTANT THING: for those wantinf to use stair instead of blocks, you can do it for the first two (closest ti the switch) but not bottom "seeable blocks that are revealed vis the pistons taking the 3rd top block, pretty sure stairs are considered slabs so the redstone pitches a fit. Also remember to add the repeater as seen in 3:33 to help with properly timed cycling.
From where he put the lever, make a staircase leading to your desired top, make the red stone dust trail leading to the top, put your lever down and it should work, to close it from the bottom also, just put another lever near the redstone dust trail at the bottom, it'll intercept it
Im having a problem with the 2 sticky pistons with the sticky piston facing up, the one facing up wont extend, only way i managed to get it to move was put a red stone torch under it but obviously it wont operate by the lever then
I worked it out, wire a second redstone string that leads directly into the piston that’s problematic. It should also connect to the lever so it all turns on at the same time
I’ve just figured it out you need to add another redstone trail connected to the bottom piston to the lever and add a redstone repeater 1 redstone dust before the bottom piston max tick
okay guys i don't if you have solve your problem yet, I solved the problem by adding a block in place of the redstone connected to the bottom piston, and then connected that block to the redstone trail leading to the lever.
Amazing vid if u do it right it works some people are doing it wrong and saying it doesn’t work it works on every edition of Minecraft definitely recommend this vid took me a few try’s but I eventually built and it worked
I cant find any good tutorials on making a flush (Or as close to flush as possible) 3 x 3 piston staircase, the only one i did find dousnt work anymore, could you make a tutorial on that next?
I need some help. My middle step with the two sticky pistons is not working. The bottom one extends but the top one doesn't come all the way back down.
yo how do you get it to work with buttons? i like the idea of it being able to open and close behind me but with this I only open and close it from the outside? how did you manage it?
awesome build! worked well for me when just doing one, but after mirroring it and trying to add the buttons it started having synching issues? goes back and forth with the 3 sticky pistons not closing together, tried adjusting the repeaters which fixed that problem but then causes the top of the 2 pistons on the second step to not fully extend. Any advice for how to fix that?
Hello! My middle piston after trying to bring the floor back up stays down and i have to hit the lever twice to cycle it back to it working again any idea whats going on?
so the ground i'm using is kinda staggered, and i want it to look like it hasn't been touched, how would i modify this to make the middle block go one higher when closed?
can i have some help? whenever i activate it with my lever, the two sticky pistons that are stacked, the lower one just stays still and doesn’t push the second one higher. im not too good with redstone and im totally lost.
Having the same problem. The second stair, which would be the double sticky piston facing up is in issue for me. The bottom piston will not extend with the rest of the pistons as it does in your video
You could put a comparator coming away from a furnace, then 2 dust coming from the comparator with a repater afterwards, and the repater will only turn on when there’s enough items in, hopefully
This design surprisingly works in java 1.20.2 just you need to make sure the redstone dust at 2:07 goes into the piston with a target block beside it (or repeater or any redstone item which transmit signal directly to the piston) super tiny build and very impressive
when you place down a slab and put Redstone on it, it doesn’t work because only the bottom slab will not work, it’s like placing a block but splitting in half and the Redstone can’t be placed. So the way you can do is place a block and place a slab on the right side top of the block, then destroy the block and place Redstone on the top of the slab.
![The 2 WIDE HIDDEN STAIRCASE! [Minecraft Bedrock 1.21] Tutorial](http://i.ytimg.com/vi/aV7b3hjfsg4/mqdefault.jpg)
![The 2 WIDE HIDDEN STAIRCASE! [Minecraft Bedrock 1.21] Tutorial](/img/tr.png)
For anyone having issues with the second step bottom piston not extending. Remove the redstone by that piston (Check the video at 3:14, it's the redstone to the far right). Place a solid block there, and add redstone to the top.
Did what you said, didnt work.
Fixed it for me. Thanks!
ACTUAL HERO.
THANK YOU!!!
THANKS YOU WISE MAN!
This design surprisingly works in java 1.20.2 just you need to make sure the redstone dust at 2:07 goes into the piston with a target block beside it (or repeater or any redstone item which transmit signal directly to the piston) super tiny build and very impressive
yes i try it and it not go in the piston how do i fix pls help
@@KexLaker I did it in Java 1.20.3 and it works very well if you replace the first redstone at 2:03 with a target block.
nice fix cheers
Anybody try in 1.20.4?
@@gallaxial8361 still works 1.21 java replacing redstone going into piston with target block
1. Instead of placing the lever where he placed. Instead, trail redstone up a staircase you make leading back to the room. Using a button will be difficult, so just hide the lever in the room from the trail of redstone.
2. You wont be able to close it behind you. And you will be stuck if someone closes it behind you. Fix this by leading another trail of redstone from the original trail like a T, and lead it downstairs to where your hidden room is. Add a lever there.
Omg thank you so much this helped me so much on my build
When I make the red stone trail longer the lever has no effect. How can I fix?
@@reoqq3842red stone repeater
@@reoqq3842use redstone repeaters in between the redstone trail
Bro I just discovered your channel a few days ago and I have almost 20 of your builds in my base. This guy doesn’t miss
Lol Ty
This design surprisingly works in java 1.20.2 just you need to make sure the redstone dust at 2:07 goes into the piston with a target block beside it (or repeater or any redstone item which transmit signal directly to the piston) super tiny build and very impressive
For anyone wondering how to close it from the outside all u have to do is bring the redstone out 3 blocks from where u put your lever then bring it up to where you want the lever on the outside
I'm confused what do you mean
You are a life saver man!! Tysm
Hey im not sure im following
Wait so how do you add a button onto it?
There is a video in this channel
@@preethyshaji0502which video? I don't see anything about how to add a button to the hidden staircase
ua-cam.com/video/JhSWfNtckjs/v-deo.htmlsi=b278u8-_dhS-hzhz
Just hook a T flip flop to it
@@fe4rlessisback32whats that could you be a little bit more specific?
SUPER IMPORTANT THING: for those wantinf to use stair instead of blocks, you can do it for the first two (closest ti the switch) but not bottom "seeable blocks that are revealed vis the pistons taking the 3rd top block, pretty sure stairs are considered slabs so the redstone pitches a fit. Also remember to add the repeater as seen in 3:33 to help with properly timed cycling.
First of all. Love your designs. But I was wondering if you could do a 5 wide hidden staircase bedrock tutorial 😅
How to make the door close behind you?
ua-cam.com/video/JhSWfNtckjs/v-deo.html&si=BMVXXUXKy2Eb30_y ua-cam.com/video/JhSWfNtckjs/v-deo.html&si=BMVXXUXKy2Eb30_y ua-cam.com/video/JhSWfNtckjs/v-deo.html&si=BMVXXUXKy2Eb30_y ua-cam.com/video/JhSWfNtckjs/v-deo.html&si=BMVXXUXKy2Eb30_y ua-cam.com/video/JhSWfNtckjs/v-deo.html&si=BMVXXUXKy2Eb30_y ua-cam.com/video/JhSWfNtckjs/v-deo.html&si=BMVXXUXKy2Eb30_y ua-cam.com/video/JhSWfNtckjs/v-deo.html&si=BMVXXUXKy2Eb30_y ua-cam.com/video/JhSWfNtckjs/v-deo.html&si=BMVXXUXKy2Eb30_y
How do you close it from the top?
Button maybe?
From where he put the lever, make a staircase leading to your desired top, make the red stone dust trail leading to the top, put your lever down and it should work, to close it from the bottom also, just put another lever near the redstone dust trail at the bottom, it'll intercept it
ua-cam.com/video/JhSWfNtckjs/v-deo.html&si=BMVXXUXKy2Eb30_y
Im having a problem with the 2 sticky pistons with the sticky piston facing up, the one facing up wont extend, only way i managed to get it to move was put a red stone torch under it but obviously it wont operate by the lever then
Same here
I tried it 4 times… the top step doesn’t push up. I’m so frustrated.
I worked it out, wire a second redstone string that leads directly into the piston that’s problematic. It should also connect to the lever so it all turns on at the same time
Same, my top piston keeps pushing the stair up again...
I’ve just figured it out you need to add another redstone trail connected to the bottom piston to the lever and add a redstone repeater 1 redstone dust before the bottom piston max tick
Why doesn’t my top sticky piston on the double not stick to the other sticky piston? 1:36. Can I get some help?
Same thing happening to me aswell
the repeater on top of the observer has to be at 1 or 2 ticks
I'm trying that repeater on all settings and it's still not firing on top, leaving my middle block lower by 1 block
I am having trouble the middle sticky piston is stuck and the one under wont pull it down
the repeater on top of the observer has to be at 1 or 2 ticks
the second step piston is firing but it just won't pull the block back down, how do I fix this?
I have the same problem did you fix it?
okay guys i don't if you have solve your problem yet, I solved the problem by adding a block in place of the redstone connected to the bottom piston, and then connected that block to the redstone trail leading to the lever.
the repeater on top of the observer has to be at 1 or 2 ticks
Amazing vid if u do it right it works some people are doing it wrong and saying it doesn’t work it works on every edition of Minecraft definitely recommend this vid took me a few try’s but I eventually built and it worked
I am so confused, I cannot get my observer to go the way his did. Like it physically won’t go that direction
I used this tutorial to make a hidden staircase in java, thanks man.
Np
What about the buttons?
You gotta watch an entirely different video in order to figure out how apparently
I cant find any good tutorials on making a flush (Or as close to flush as possible) 3 x 3 piston staircase, the only one i did find dousnt work anymore, could you make a tutorial on that next?
I’ve made one on my main channel that still works @TomcoMC
THANK YOU
Np :)
Working perfectly on bedrock... thank you.
Not a single chance the observer is facing the right way, they change it or something
They haven’t changed the way you place observers? Could you not just copy what I did?
No it doesn't work all bs
works in java too!
Wowwww this is the cool, faster and easy to build
I need some help. My middle step with the two sticky pistons is not working. The bottom one extends but the top one doesn't come all the way back down.
is your first repeater on 3 ticks?
@@sampither4433yes I have the same issue
@calebblong4552 try to change the repeater on the very bottom so when it’s the standard time try pressing it once that can fix it
Nvm
the repeater on top of the observer has to be at 1 or 2 ticks
You can also connect it to a line of redstone coming out of a chiseled bookshelf
Edit: thanks for the tutorial, works great, and I'm bad at redstone!
yo how do you get it to work with buttons?
i like the idea of it being able to open and close behind me but with this I only open and close it from the outside? how did you manage it?
This video may help,
ua-cam.com/video/JhSWfNtckjs/v-deo.html
It should work the same even though this isn’t a door 👍
@@TomcoTwo Worked Great! Thanks!
The observer just don’t places like I want it to
Thanks, this will work great for survival 😊 thank you
WOW this is the best redstone build i’ve ever made! you have a new sub!
thanks!
I want to learn to understand redstone like this so i can do it too
I love you, I succeeded
This is cool but how do you activate it from the top?
Idk I've been wondering about that
this works on java too :D
Nice video just organize it better people building it into their base and not in the open are having a hard time
Bro deserves way more subscribers
im on bedrock 1.21 and the third piston isnt bringing the block down
same have u found a solution yet 😢
awesome build! worked well for me when just doing one, but after mirroring it and trying to add the buttons it started having synching issues? goes back and forth with the 3 sticky pistons not closing together, tried adjusting the repeaters which fixed that problem but then causes the top of the 2 pistons on the second step to not fully extend. Any advice for how to fix that?
Did it work when you mirrored it and just used a lever?
Hello! My middle piston after trying to bring the floor back up stays down and i have to hit the lever twice to cycle it back to it working again any idea whats going on?
Thanks for the tutorial
np :)
Tysm
Np
Ty, it was a big help. ❤❤🎉
Np :)
@@TomcoTwo i subbed 😊
Yeah I just spend 60 mins trying to figure it out imma check out some of the other tutorials
so the ground i'm using is kinda staggered, and i want it to look like it hasn't been touched, how would i modify this to make the middle block go one higher when closed?
You can’t really do that with this design sorry
I am so incredibly bad at this its actually surprising
can i have some help? whenever i activate it with my lever, the two sticky pistons that are stacked, the lower one just stays still and doesn’t push the second one higher. im not too good with redstone and im totally lost.
I just realised why it was working on my bedrock creative world and not on the java server, because this only works on the superior version
The staircase works on java, but i cant hook up t flip flop to it? am i stuck having to use a lever or is there a method that works with buttons
Easy to build
ありがとう
when i do this, the second stair wont go down fully any help please? like it is two block on the top level and the third 2 blocks below
The sticky piston won’t grab the other piston what do I do?
I’m a bit confused what you mean, are you in bedrock?
Having the same problem. The second stair, which would be the double sticky piston facing up is in issue for me. The bottom piston will not extend with the rest of the pistons as it does in your video
@@TomcoTwodoes it work In bedrock
Yes
@@TomcoTwo then why isn’t it working for me😣
Look bad but cool working ❤
wait i just saw this design in a mumbo video, even had the same jokes
Bruh i am made it even bigger
How is this so smal?😳
Is it possible to add rails on the stairs without breaking them??
sticky piston grabbing a sticky piston dose not pull the block the second sticky piston has.
Does it work for Java?
no sorry
Why can I not place the first observer down? I’ve been trying for about an hour now😭
Also, the observer point to the side blocks and will never go the angle that I need it to
same, ended up pissed off cause i couldnt get it
1 question how do you make it as a button activation?
Genius
Obv
Dude you make it so it's activated by putting a specific amount of items in a furnace?
You could put a comparator coming away from a furnace, then 2 dust coming from the comparator with a repater afterwards, and the repater will only turn on when there’s enough items in, hopefully
@@TomcoTwo thanks it worked though i had to search how comparators work
This rly was helpful so I sub
Ty :)
Could u use a stair, and then use a block swapper to remove it ehen we want to make it look coller?
I do have a version of that on my main channel, but I will probably end up making a new tutorial on it for over here
any way i can open and close it with a button instead of a lever?
Ist ja super, aber ich muss doch auch außen einen Hebel haben, aber etwas unauffälliges.. leider wurde hier nicht erklärt, wie ich dies tue
I like it but how do I extend it to like 4 more stairs?
As an average minecraft play this is not simple 😂
but where do we place the buttons like in the beginning of the video?
thanks a lot for the help
Np :)
@TomcoTwo you are a easy maker
Does it work on bed rock
this ia god tutorial
Could someone please explain to me how I get a lever/ button for the top of the design?
I’ve had so many issues with this in vanilla you’re wrong. It doesn’t work in vanilla.
This video was made in vanilla, as long as you’re on bedrock it works
Does this work in Java?
This design surprisingly works in java 1.20.2 just you need to make sure the redstone dust at 2:07 goes into the piston with a target block beside it (or repeater or any redstone item which transmit signal directly to the piston) super tiny build and very impressive
Oh I just know I’m going to have to watch this another 20 times before I can even try to build this 😅🥲
The double piston will not pull the block back down I need some help
If i want make it 3x3?
You’d need to find a 3x3 design sorry
Decent tutorial works like once or twice then my sticky piston doesn't want to stick to the other one what am I doing wrong 😭
Love u man thx for the build
how to do the button thing from up above?
if anyone knows pls tell me
Literally built it from the beginning and nothing else.
I said it was simple XD
Wow this so small and fast
Indeed!
How do i make it so the lever isnt udnerground
How is the bedrock you can't place redstone on slabs?
when you place down a slab and put Redstone on it, it doesn’t work because only the bottom slab will not work, it’s like placing a block but splitting in half and the Redstone can’t be placed. So the way you can do is place a block and place a slab on the right side top of the block, then destroy the block and place Redstone on the top of the slab.
Why did you add the button and then give me instructions?
Wdym
?@@TomcoTwo
I don’t get what you mean
@@TomcoTwo What do you mean by block?
Like a cube? I’m confused i can’t lie
the bottom piston for the second step isn't pulling down the top piston :(
Mumbo tomco
anyone having trouble on java 1.21.1 with the pistons?
shit I just read the title does this not work on Java?
this only works on bedrock sorry
im building this in a cherry blossom biom
redstone is not locking on to the piston lol
How do i power the top repeater?
Well done!
Thanks :)
@@TomcoTwothe double piston is not pulling the block back down
why is it also the two pistons directly on top of each other the ones that never work -_-
try putting a block next to it and putting the redstone dust on top of that
Why no likes fiys smash it so he will male more
How do you open it from the top
I need help the top of the second piston doesn’t attract back down it stays up please someone help me 😓🫠
how to make it last longer?
👍