Hi again! Finally I have finished all the cable connections Just need to program the Vesc controller with the tool My question now is that I have voltaje in the controller but when the switch is turned on the battery indicator, Bluetooth music, lights, stop lights, are not working anymore. Once the Vesc controller is programmed are all the original functions will work again? Thank you
@@rafaelestrada3919 hello You need a dc convertor to 12 or 24v from the voltage you are using and you need to connect the music and lights thru the dc convertor. If you conect them directly you will burn them
The motor is stock and has 180w at 24v. the maximum i setup i have is 75v and 150A. I recorded on my vesc over 9000W when accelerating and the motor still runs fine
You're a legend man. Can't wait to try this out
super tare ! , 👍, imi place engleza cu accent romanesc 😁
Excellent work! Good job!
One question, the same battery charger the car has can it be used for this same batteries or I need to buy another charger?
Thank you.
LIPO BATERIES require balance charger or bms with the corect voltagr charger
Hi again!
Finally I have finished all the cable connections
Just need to program the Vesc controller with the tool
My question now is that I have voltaje in the controller but when the switch is turned on the battery indicator, Bluetooth music, lights, stop lights, are not working anymore.
Once the Vesc controller is programmed are all the original functions will work again?
Thank you
@@rafaelestrada3919 hello
You need a dc convertor to 12 or 24v from the voltage you are using and you need to connect the music and lights thru the dc convertor. If you conect them directly you will burn them
@@ExtremePowerWheels
Thank you, send you another email for reverse switch help that is not working correctly.
Hey man! I'm having trouble finding the right jst plugs for the vesc, what size are they?
Hello it Jst PH 2.0 connector
If you need more power then i have a better version capable of 150volt and 400amps at phase.
Is it home made?
Yep just finished and tested it this week.
Yeah it is currently hand soldered as it was a prototype. After some iterations it is ready for production.
@@hemantbabel4279 do you have a video?
@@hemantbabel4279 please send me a email on vufmihai@gmail.com
сколько ватт
The motor is stock and has 180w at 24v. the maximum i setup i have is 75v and 150A. I recorded on my vesc over 9000W when accelerating and the motor still runs fine