My yd100 is stock at the moment and I can pull out from a dead stop with a 32 tooth sprocket and im getting ready to install the dio reed kit and a nitrous kit just to have some fun
It is and the back sprocket is the 38 tooth sprocket... they're really good engines but mine is struggling with power deficiency for some reason... I hope this helps you Sun dial
@@motorizedbikesar7000 too bad youre having to port it it to make any power , im hoping to run a 32t on it cause i heard stock they make good torque and want a 28mph cruise at lower rpm for long 30mile average nonstop rides . With my firestorm80 36t i can cruise 25mph on the 30mile nonstop rides w out runnin hot . Keep us posted on your progress an have happy holiday season
@@sundial6919 I run a 32 tooth sprocket on my zeda 80 and I can climb the hills in my area with ease. I do have a high performance head and exhaust with a ported cylinder and windowed piston and reed valve but I'm probably gonna sell it because I have the phantom 85 on my new bike so I'd like to get the zeda 100 for my spare since they have the two piece cylinder option and I can upgrade it
@@Westhelockpicker glad to hear it for you an hope the Phantom runs out good for you too , my stock zeda w a 40t runnin good w little over 1k miles so , cheers !
10mm wrist pin... Yeah I ported it... For whatever reason it was just gutless.. I am very disappointed 😞😞😞... I sold it last night as a matter of fact I did a sorta farewell video about it...lol... I really appreciate you trying to help me out Johnnie... I really think there's something wrong either with the casting or with the stock port timing...
@@motorizedbikesar7000 oh that stinks bud sorry you had bad luck with it but it is what it is, the way they mass produce them they all can’t be winners. Well, not exactly; they could be winners if China had ANY quality control. Lol to bad to the 10mm wrist pin is a true yd100 and a much better place to start. Hey for the record I didn’t cut the head off that one so I can inspect the piston, personally when he says that is the reason for a two piece head I thinks it’s funny cause that’s not even an idea in my head on y to have it like that. But I did it to get the port timings I wanted really. What motor did u get for your sons bike now?
@@JMB676 I am building a triple 40 for my son... With the G2 Reed valve and a windowed piston... 47mmx40mm .. yeah it's all good with the YD, I think I have a plan for another one but it's going to be later on down the road, I am doing the minirelli next after I get thru the holidays 🤔🤔🤔... And by the way bro we wish you and Heather and Gunnar a very blessed holiday season... You guys are always in our prayers 🙏🙏🙏... Thanks for reaching out to me bro it really means a lot.... Tell the Fam we said hello 🤗🤗🤗...
@@motorizedbikesar7000 I’ll definitely tell them and same to you and yours, thank you very much for that, and it’s no problem I truly enjoy this hobby and just love talking with other like you and I that love this hobby.
Yd100s make all the noise when off yet run strong I should've definitely broken mine in slower
My yd100 is stock at the moment and I can pull out from a dead stop with a 32 tooth sprocket and im getting ready to install the dio reed kit and a nitrous kit just to have some fun
Break takes time. Don't abuse it till then.
Subbed. Take us for a ride.
Will do when it stops snowing..lol 😎😎
Try this carburetor, I put it on my and it felt like a new bike
I appreciate it...
Is yours the zeda yd100 and what size back sprocket ? Im about to get the zeda yd100
It is and the back sprocket is the 38 tooth sprocket... they're really good engines but mine is struggling with power deficiency for some reason... I hope this helps you Sun dial
@@motorizedbikesar7000 too bad youre having to port it it to make any power , im hoping to run a 32t on it cause i heard stock they make good torque and want a 28mph cruise at lower rpm for long 30mile average nonstop rides . With my firestorm80 36t i can cruise 25mph on the 30mile nonstop rides w out runnin hot . Keep us posted on your progress an have happy holiday season
@@sundial6919 I run a 32 tooth sprocket on my zeda 80 and I can climb the hills in my area with ease. I do have a high performance head and exhaust with a ported cylinder and windowed piston and reed valve but I'm probably gonna sell it because I have the phantom 85 on my new bike so I'd like to get the zeda 100 for my spare since they have the two piece cylinder option and I can upgrade it
@@Westhelockpicker glad to hear it for you an hope the Phantom runs out good for you too , my stock zeda w a 40t runnin good w little over 1k miles so , cheers !
On an air colled engine i wouldn't sit still and rev the shit outta it personally
Did you do the porting yet? And what size wrist pin do you have? Jw
10mm wrist pin... Yeah I ported it... For whatever reason it was just gutless.. I am very disappointed 😞😞😞... I sold it last night as a matter of fact I did a sorta farewell video about it...lol... I really appreciate you trying to help me out Johnnie... I really think there's something wrong either with the casting or with the stock port timing...
@@motorizedbikesar7000 oh that stinks bud sorry you had bad luck with it but it is what it is, the way they mass produce them they all can’t be winners. Well, not exactly; they could be winners if China had ANY quality control. Lol to bad to the 10mm wrist pin is a true yd100 and a much better place to start. Hey for the record I didn’t cut the head off that one so I can inspect the piston, personally when he says that is the reason for a two piece head I thinks it’s funny cause that’s not even an idea in my head on y to have it like that. But I did it to get the port timings I wanted really. What motor did u get for your sons bike now?
@@JMB676 I am building a triple 40 for my son... With the G2 Reed valve and a windowed piston... 47mmx40mm .. yeah it's all good with the YD, I think I have a plan for another one but it's going to be later on down the road, I am doing the minirelli next after I get thru the holidays 🤔🤔🤔... And by the way bro we wish you and Heather and Gunnar a very blessed holiday season... You guys are always in our prayers 🙏🙏🙏... Thanks for reaching out to me bro it really means a lot.... Tell the Fam we said hello 🤗🤗🤗...
@@motorizedbikesar7000 I’ll definitely tell them and same to you and yours, thank you very much for that, and it’s no problem I truly enjoy this hobby and just love talking with other like you and I that love this hobby.
Is an Olyn yd100 any good or has the 4 star pattern on top like the 110 but it’s a 100
Give it a chance to run in keep your speed down don't keep revving it hard it doesn't do the engine any good
I got rid of it... I'm done with the YD 100 platform
La clutch qui doit glissé..tu t en rend pas compte..mais si on le voit pas roullé peu pas vraiment t aidé