Hello, Nice, great video.... Dude, how firmware version CPU do you use in those videos? I'm trying to communicate with Simatic S7-1200 1212C (V4.6) or 1214C (V4.5) but without success...
My CPU is V4.4, your v4.6 or v4.5 should be no issues on this feature. Please note that the Siemens CPU runs as Ethernet/IP adapter / slave in this case. I had many cases of using this method for the ethernet/ip communication
Good afternoon, talk about Brazil São Paulo. Congratulations, for your channel, great content. I have a question: I have a pll ET200 CPU 1510SP-1PN/06ES7510-1DJ00-0AB0 and I am trying to communicate with the shneider plc M241. However, the LCC ENET SCANER block does not work on this model (ET200). Please, do you have any tips on how to carry out this communication? Thanks
I’m trying to do the same thing using Ethernet IP scanner(master)as S7-1500 and slave as M221 plc. The Ethernet IP scanner block isn’t working as it’s showing parameter error. Would be great if you can make a video on that
On the Siemens side, the status is 7414. We make the same settings as you. What could be the problem? S71200 PLC 6ES7212-1AE40-0XB0 SCHNEIDER TM241CEC24T
vendor id and product code are correct because we have uploaded eds file. Need to make a change in eds file? The required information in the respective CPU is correct.
Great to find your tutorial here on Modicon M251.
Thanks for watching! Which kinds of topics you like and are you working on
Hello, Nice, great video.... Dude, how firmware version CPU do you use in those videos? I'm trying to communicate with Simatic S7-1200 1212C (V4.6) or 1214C (V4.5) but without success...
My CPU is V4.4, your v4.6 or v4.5 should be no issues on this feature. Please note that the Siemens CPU runs as Ethernet/IP adapter / slave in this case. I had many cases of using this method for the ethernet/ip communication
Do you know if it exists for TIA14?? Because it's not possible for me migrate to upper version.
It supports starting from V16.
@@electricalautomation Thanks!
hie i have my Schneider M251 and its showing Red light on I/O and it will stop working then shows communication error on HMI
Do you know how to Visual studio connect plc by ethernet ip protocol? thank
Good afternoon, talk about Brazil São Paulo. Congratulations, for your channel, great content. I have a question: I have a pll ET200 CPU 1510SP-1PN/06ES7510-1DJ00-0AB0 and I am trying to communicate with the shneider plc M241. However, the LCC ENET SCANER block does not work on this model (ET200).
Please, do you have any tips on how to carry out this communication? Thanks
If your CPU version is >= 2.6, the ET200 CPU 1510SP should be Ok because it is still s7-1500.
I’m trying to do the same thing using Ethernet IP scanner(master)as S7-1500 and slave as M221 plc. The Ethernet IP scanner block isn’t working as it’s showing parameter error. Would be great if you can make a video on that
Please find this video, running Siemens as EIP Master ua-cam.com/video/zU5FYHFK5x4/v-deo.htmlsi=wiZA6v-QH483cffR, this link is also under COM28 video.
On the Siemens side, the status is 7414. We make the same settings as you.
What could be the problem?
S71200 PLC 6ES7212-1AE40-0XB0
SCHNEIDER TM241CEC24T
16#7414 Vendor ID or Product code Mismatch
vendor id and product code are correct because we have uploaded eds file. Need to make a change in eds file? The required information in the respective CPU is correct.
How to read and write data bewteen PLC S7-300 via rpofinet ?
S7-300 does not fit this application.
@@electricalautomation I mean two S7-300 communication each other which the old PLC I have no source
@@vorapobautomation9760 You can use S7 Connection via Ethernet, or MPI Put Get