To put the tiny lock washer back on the rod you might have to push down the plastic at the rod until you see the indentation on the rod. Once you see the indentation it goes on easily!
oh wow, you are right; I just slid the four green tabs all the way to the right and that led to no error.......wow.....and it printed fine.........wasted so much time sliding wires back and forth, back and forth
I don't think you necessarily need the alcohol - I didn't. There was just a lot of accumulated toner dust in the Drum Unit. I got it out by repeatedly turning the drum, sliding the green slide and banging the unit (lightly) against the table to knock out all the accumulated dust. It was surprising how much more came out each time I repeated that procedure until there was no more.
Remove this video is not the right way to do it. All you need todo is slide the green tab an place it in the marked place with an arrow. See the manual.
Patna Sai aapka video dekar kiye ho gya kaam thanks bro
To put the tiny lock washer back on the rod you might have to push down the plastic at the rod until you see the indentation on the rod. Once you see the indentation it goes on easily!
Thank you very much for your informative video, I have restored my drum unit to brand new condition. Thanks greatly
oh wow, you are right; I just slid the four green tabs all the way to the right and that led to no error.......wow.....and it printed fine.........wasted so much time sliding wires back and forth, back and forth
Napakagandang tutorial bro..
Galing nito. 100% helpful.
I don't think you necessarily need the alcohol - I didn't. There was just a lot of accumulated toner dust in the Drum Unit. I got it out by repeatedly turning the drum, sliding the green slide and banging the unit (lightly) against the table to knock out all the accumulated dust. It was surprising how much more came out each time I repeated that procedure until there was no more.
Thank u. Big help...i liked the vid,i will recommend ur channel
Amazing Video
na bisita ko na rin po kayo, stay connected
Works great on DCP-L2520DW !!! Thank you!
good job.. need maintenance cleaning..
Thank you this worked for me to be able to extend the drum life until i can get a new one
thanks for sharing, nice and simple, straight to the point.
after doing that 2-3 print and it will come out again?? what should I do??
YES IT WORKS
, THANKS
Super bien, muchas gracias.
video is great thanks but error not goes till , fallow up all your tricks , also other chanel fallowing too but not goes error
Big thanks! its really working so good!
So helpful, thank you so much
thank you
sirji fir bhi green tab error nahi ja raha hai, drum pipe bhi replace kar diya , alchohol se bhi saf kiya fir bhi nahi ja raha hai error
Hi 😀 done my support.ty😘
Nice
Hi! Can u tell me specifically how u remove the green thing? We tried but hindi sya natanggal. Paano po ba? Sa video mo seemed madali lng.
Sir, ganyan nangyare sa akin. Nagpalit na ako bagong Drum.. pero Slide green tab on Drum error padin. Anu na dapat gawin ko po?
Which solution is used for cleaning..
How can I get it ???
sir,,pwede patulong po??? sa brother dcp l2540 po may problem sa output, merong itim sa bandang gilid ng papel...
how did you get the lock for rod?
I tried but can't remove it. I don't know how to do it too.
anong klaseng alcohol po pwedeng gamitin sir?
pwede po kahit na anong alcohol ang gamiton mo .
Ako gamit ko metal polish at cotton pagnililinisan ko yang drum
pano po naaalis un maliit n lock?
Same question
I have replaced by new drum
Although the the life of drum is very less (18% as before it is).
Mine prints blank pages. Could it due to the Drum as well ? Firts day was just okay..just after next day it couldnt print out normally
Just blank
It doesn't work.......next Idea
Brother Dpc l 2540dw Hit roller koi pawa Jai vaia
01722900052
Remove this video is not the right way to do it. All you need todo is slide the green tab an place it in the marked place with an arrow.
See the manual.