Hi I've done an installations of this panel mg5050 at a double story building. Panel can only Receive signal from 3 - 4mtrs only. Above that it doesn't work. What could be the issue?
now only one antenna is attached. if you connected it correctly to the ant. it should go. in my experience 3 floors. 4 floor with problems. sometimes the problem is parallel to the plaster cable near the antenna. even if I disconnect the antenna, it goes well 10 meters. nothing is left to just try. the other location of the control panel and if this does not help, the control panel may be bad
Have a look at the inprover video on youtube, search for DadTech Ltd Inprover Detection System , this will totally validate any property alarm system, it will prove to outsiders,whether it is, or is not a false alarm!
What is this alarm for? WTF :S for LIVING SPACE! house, apartment etc. these 2 same things is detectors is for motion detection, in some cases there is one more thing on doors, magnet switch, when someone open doors magnet on doors separete from magnet switch, and then u have some seconds to enter password on alarm keyboard before alarm is activated. But in some cases there is hidden camera in motion detectors, u can check that easly with visual inspection, small camera lens is easy to spot them.
I know this is an old video but hoping you can help. When I try add a zone by pressing power, and the installer code I just get a long beep and it goes back to default view... alarm and stay D are both off. Any idea?
Hi, What alarm cable is needed exactly and can we install 2 keypads on this Magellan Paradox MG5050 central unit?
excellent video.do you have any short code programming guide for the MG5050 or SP5500?the general programming i mean..
Hello.Can you tell me how to program k37 wireles keypad with babyware?
let me know where can I find a power supply for this alarm. It's urgent :/
Thank you for this video and thank you for unselfish help
Hi
I've done an installations of this panel mg5050 at a double story building. Panel can only Receive signal from 3 - 4mtrs only. Above that it doesn't work. What could be the issue?
now only one antenna is attached. if you connected it correctly to the ant. it should go. in my experience 3 floors. 4 floor with problems. sometimes the problem is parallel to the plaster cable near the antenna. even if I disconnect the antenna, it goes well 10 meters. nothing is left to just try. the other location of the control panel and if this does not help, the control panel may be bad
@@golfwagen4173 hi...I need to know more on the antenna installation. Is there a proper way of installing it?
Is there any way you can be contacted? Via email or something?
Have a look at the inprover video on youtube, search for DadTech Ltd Inprover Detection System , this will totally validate any property alarm system, it will prove to outsiders,whether it is, or is not a false alarm!
Hi a stupid question what is thus alarm for ? cuz I found many in my new rented flat and was thinking it is spy cams .
What is this alarm for? WTF :S for LIVING SPACE! house, apartment etc. these 2 same things is detectors is for motion detection, in some cases there is one more thing on doors, magnet switch, when someone open doors magnet on doors separete from magnet switch, and then u have some seconds to enter password on alarm keyboard before alarm is activated. But in some cases there is hidden camera in motion detectors, u can check that easly with visual inspection, small camera lens is easy to spot them.
Svaka cast.
Do I need a keypad for this ? I am interested in the touchpad instead
For use no need keypad.
I know this is an old video but hoping you can help. When I try add a zone by pressing power, and the installer code I just get a long beep and it goes back to default view... alarm and stay D are both off. Any idea?
it probably is not the right code
Thanks for the reply. The code works if press ENTER and the code.
Brett Meyer You have the user code and not the engineer code.
16:14
hahahaha
Polish accent not Oxford!!!!