I love the "pull with confidence". I am just now doing a full install on one. I have done some radio add ons but this is first go on the lighting and ect. Thanks.
For those wondering. You can be carful and remove the plastic ribbets. Use a prying tool. And take it out a bit. Then there’s going to be a center price in the middle that will be exposed once you take it out a bit. Push that in and then pry it out again and it should work without breaking it. Just don’t stretch it too much.
@@maddman7755 yes. You can use the same ones as GM ones. Here's the info. A dude in US sells a oack of 50 for reasonable price on ebay. Expensive from dealership. 1/4" (6.35mm) Rivet Diameter 21/32" Flange Diameter 5/32" - 13/32" Grip Range Black Nylon Blind Rivets GM # 14063981 Ford # N803043-S Chrysler # 6500911 AMC # 34202855
It's sad that you have to completely disassemble the entire front end just to do anything behind the grill. Had I known this would be the case, I would have never purchased my 2016 Durango. And after this, I will never purchase another Chrysler product again.
Hey bud thanks for the video, It did help me to remove my front bumper.
I love the "pull with confidence". I am just now doing a full install on one. I have done some radio add ons but this is first go on the lighting and ect. Thanks.
Very explanatory...you should do more videos
For those wondering. You can be carful and remove the plastic ribbets. Use a prying tool. And take it out a bit. Then there’s going to be a center price in the middle that will be exposed once you take it out a bit. Push that in and then pry it out again and it should work without breaking it. Just don’t stretch it too much.
Great video, thanks I needed this to remove a headlamp 2014 Durango. Had an idea and you just confirmed it. 👍
Doing It As I Write This. Thanks My Man
Just what I was looking form. Have to do an HID install and trying to determine if I should remove the whole front bumper instead.
So you say to pull with commitment, my girlfriend tells me I have commitment issues, will I be able to handle this?
Do u need to remove the bumper in order to remove the grille?
Yes...
I'm about to make a video installing a billet grille.
You don't have to cut the plastic rivets by the wheel well all you need to do is use a pry tool and they will pop out.
It's easier to unplug the fog lights, you don't risk breaking the bulb that way.
thanks i nee dto replace the radiatior on my r/t and cant find 1 video how to get to the damn thing
The rivet you cut, what dimension is that? I'd like to buy a few before removing the bumper cover.
LycanPaw did you ever figure out the dimensions of the rivets? I’m thinking of pulling mine off soon
@@maddman7755 yes. You can use the same ones as GM ones. Here's the info. A dude in US sells a oack of 50 for reasonable price on ebay. Expensive from dealership.
1/4" (6.35mm) Rivet Diameter
21/32" Flange Diameter
5/32" - 13/32" Grip Range
Black Nylon
Blind Rivets
GM # 14063981
Ford # N803043-S
Chrysler # 6500911
AMC # 34202855
Thank you!!!
Good job.
I was stuck on the studs. I can't believe they are to be cut off. 🤨
It's sad that you have to completely disassemble the entire front end just to do anything behind the grill. Had I known this would be the case, I would have never purchased my 2016 Durango. And after this, I will never purchase another Chrysler product again.
Dude you're way too aggressive with those clips ands bracers. I would not want you working on my car. You need to slow down and not reef on shit.