Thank you very much for helping the 3d community to learn this great program! You are doing amazing baby steps tutorials that anyone can fallow! Don't change your teaching approach, because you are one of the few teachers out there that- offers ease progressive learning to all of us. Thank you.
Great Video sir, watched all the previous videos. The titles were sort of a clickbate, but it works lol. I have SolidWorks running as I'm watching. You are straight up showing the meaty part of this software. And I got hooked into watching more of the videos after the first one, very well done! And I will watch the rest of the videos whenever I can! Much appreciated
How could you put a robbed surface on the cone? Would you have to do it individually? Thanks so much for your videos... been watching and rewatching-they are better than the solid works tutorials!
Draw the cut line shape onto the front or side plane and revolve it around the cone. You can select the outter line of the cone while in the sketch and hit “convert entity” to give you the first guide line to draw the other cut lines. Hope this makes sense.
It's because the default path connecting the two profiles is slightly skewed, which ends up creating a slight twist in the cone. This could be fixed by manually adjusting the path or by making a sketch connecting the two profiles and using that as a guide curve in the loft feature.
Convert Entities makes it easy to redraw a sketch into a new sketch file. You can select any lines outside of the open sketch and then convert them into lines there. As an example, if you have a hole cut into one side of a cylinder you can open a new sketch on the opposite side of that hole and then select the hole, hit convert entity and it will automatically draw a new sketch in that open sketch. If you change the size of the original hole, both holes will change size.
how to sync two circle example:- one circle dia75mm and secound circle dia1000mm dia1000mm (1000mm-100mm=900mm) so change dia 75mm change (75mm+100=175mm) mins i one circle dia minuse so secound dia pluse is value how create बहुत बढ़िया पर मुझे ऐसा काम कुछ इस तरीके से करना हो तो कैसे करे कृपया बताये जैसे के एक circle 75mm dia का हे और दूसरा circle 1000mm dia का हे अगर में इन दोनों में से किसी की भी साइज़ बदलता हु तो वो एक दुसरे में pluse minus खुद्ब्खुद हो जाये जैसे के अगर में 75 mm dia में 25 mm जोड़ता हु तो वो dia 100mm हो गया पर जो दूसरा dia जो 1000 mm का हे वो 975mm खुद्ब्खुद हो जाये बस ऐसे कोई भी एक dia अगर pluse होता हे तो दूसरा dia खुद्ब्खुद minuse हो जाना चाहिए और कोई भी एक dia minuse होता हे तो दूसरा dia खुद्ब्खुद pluse हो जाना चाहिए हा पर जितना हम pluse या minuse करते हे उतना ही value एक दुसरे dia में pluse minuse होना चाहिए कृपया करके ये बताये ये कैसे हो सकता हे solidwork में ?
Thanks for your Help.
Your tutorials are a blessing.
STOP Parental Alienation
Children deserve to be loved,listened to and respected as living beings!
One of the best solidworks tutorial playlists I've come across--Scratch that,it's THE BEST.. thanks :)
you deserve more views and likes. this helped me out alot.
Thank you very much for helping the 3d community to learn this great program!
You are doing amazing baby steps tutorials that anyone can fallow!
Don't change your teaching approach, because you are one of the few teachers out there that-
offers ease progressive learning to all of us.
Thank you.
Perfect, just realized, im getting all over solid works:)
More video to come soon.
Great Video sir, watched all the previous videos. The titles were sort of a clickbate, but it works lol. I have SolidWorks running as I'm watching. You are straight up showing the meaty part of this software. And I got hooked into watching more of the videos after the first one, very well done! And I will watch the rest of the videos whenever I can! Much appreciated
Best tutorials for solidworks I have ever seen, definitely tell my classmates come and learn it:)
Thank you so much for these videos, they are really helpful and well made!
Great job on the videos .... please keep them coming !!
Absolutely agree, very useful. So simple and yet so informative!
Thank you
thanks bro, you deserve more subscribe and like , keep it up
You are just great
Using SW2019, I’m unable to dimension the centre line & circle from ~ 6:05. Any idea why?
Thank you.
thanks from iraq
How could you put a robbed surface on the cone? Would you have to do it individually? Thanks so much for your videos... been watching and rewatching-they are better than the solid works tutorials!
Draw the cut line shape onto the front or side plane and revolve it around the cone. You can select the outter line of the cone while in the sketch and hit “convert entity” to give you the first guide line to draw the other cut lines. Hope this makes sense.
Will play around with it and try to do that-thanks so much!
I answered your question by showing you in this video: ua-cam.com/video/dXfZMz9YNFk/v-deo.html
thank you sir for this video,
When you cross-section around 4:35. It does not look like a straight cone. It seams the external face has a inward curvature. Why that ?
It's because the default path connecting the two profiles is slightly skewed, which ends up creating a slight twist in the cone. This could be fixed by manually adjusting the path or by making a sketch connecting the two profiles and using that as a guide curve in the loft feature.
Great tutorial! But can I ask someone here, what the "Convert Entities" actually do (ideally if you can explain on example). Thanks in advance!
Convert Entities makes it easy to redraw a sketch into a new sketch file. You can select any lines outside of the open sketch and then convert them into lines there. As an example, if you have a hole cut into one side of a cylinder you can open a new sketch on the opposite side of that hole and then select the hole, hit convert entity and it will automatically draw a new sketch in that open sketch. If you change the size of the original hole, both holes will change size.
Hell yea brotha
I am having problems installing SolidWorks. Can't find the exact file.Can any one help me?
can someone please send me think link to the finished object i’m just trying to pass my engineering class
how to sync two circle example:-
one circle dia75mm and secound circle dia1000mm
dia1000mm (1000mm-100mm=900mm) so change
dia 75mm change (75mm+100=175mm)
mins i one circle dia minuse so secound dia pluse is value
how create
बहुत बढ़िया पर मुझे ऐसा काम कुछ इस तरीके से करना हो तो कैसे करे कृपया बताये
जैसे के एक circle 75mm dia का हे और दूसरा circle 1000mm dia का हे
अगर में इन दोनों में से किसी की भी साइज़ बदलता हु तो वो एक दुसरे में pluse minus खुद्ब्खुद हो जाये
जैसे के अगर में 75 mm dia में 25 mm जोड़ता हु तो वो dia 100mm हो गया पर जो दूसरा dia जो 1000 mm का हे वो 975mm खुद्ब्खुद हो जाये
बस ऐसे कोई भी एक dia अगर pluse होता हे तो दूसरा dia खुद्ब्खुद minuse हो जाना चाहिए
और कोई भी एक dia minuse होता हे तो दूसरा dia खुद्ब्खुद pluse हो जाना चाहिए
हा पर जितना हम pluse या minuse करते हे उतना ही value एक दुसरे dia में pluse minuse होना चाहिए
कृपया करके ये बताये ये कैसे हो सकता हे solidwork में ?
nICE THX FOR LEARNING US!but anoing crash when asking subscribe ! anyway tnx!
Here is better grammar:
Nice, Thanks for teaching us! But it's annoying when it crash when asking subscribe! Anyways, Thanks!
This is 11 minutes. Not 5 ._.
You just gotta not have this background music man
Keep the music!
Um... this wasn't five miutes #lies
Um... I found your comment in the SPAM section where it belongs. Troll much?
hello, maybe this video good, but it over 5 minutes. disliked