I’m a professional Powdercoater you would have been fine without heating the wheel up. The spots is called de-ionization it’s spot where the electric current swirls a good way to keep those from happening is distance and angle. Try to move the gun closer and further away while shaking the gun side to side. Also Powdercoating while the rim is hot is another way to make sure the paint lays down good but be careful because build up like you had will make it run just like normal paint
I would highly recommend that you replace the metal "duck bill" to a poly head on the tire buster. Last thing you want is to scratch your rims. Throw in a plastic scraper for the stickem' weights as well.
What you could do is mask off the wheel with just painters tape, use spray the spokes with clear but then remove the tape before baking it, in turn also removing the excess clear spray before it goes into the oven.
To get a two tone you could probably do what you did except remove the tape before baking. If that leaves residue and still doesn’t work, you could just use sheets of printer paper to “mask” off the litter barrell/lip and tape them to the wheel with a less aggressive tape like scorch tape and again remove the paper before baking. This way you don’t have to meticulously wipe off powder.
I think the center caps will look fine even with the wrap it's just a nice little bit of contrast on the all black wheels it doesn't have to all be perfectly matchy matchy it might be sick to do a colored decal on one or a couple of the spokes tho
i’m so impressed that you do all of this stuff on yourself bro! i might have to buy something just to support! also if you ever did a car giveaway that would be so sick since your builds are insane and so well put together 🔥
Bro federal engines is local to you and does free delivery to your area they are jdm motors you should look into them for a stock low mileage motor for rose to build
Devin, the new drop is fire, and I can’t wait to see the frs completely done with the new wrap, seen the sneak peak on IG, and I think you should powder coat the center caps the color you wanted to do the faces of the wheels!!!🧐🤝
I'm saving money to buy a gen 1 GT86, which means everytime you do a FRS video, i watch right away to learn something new and have fun at the same time. Thank you Devin, can't wait to see the wrap
@@gabrielvk8073 its a limited edition series yellow brz! It’s honestly one of the best cars. Such a fun car to drive although lacking a bit power but still fun
The car looks a MILLION times better with the all black holy shitake . Added +40 elegance and class while still mean as shit . The greenies were a lil too hot boy for my taste so I am glad you went all black ! Can't ever go wrong with all black !
Use some stiff pieces of paper/poster board/cardboard as a collar and eliminate the possibility of it spraying around without having to mask off the entire wheel.
I’m NOT the biggest fan of black paint or wrap on cars🤔. However those wheels in black w the black wrap & the chartreuse sherbet calipers LOOKS FREAKING STEALTHY🤔😎👌🏻.
next video you use the chemical stripper, can you please share what it is and where you find it? im tired of hand sanding all my parts. sand blaster is a must ues, but so is knowing what this chemical stripper is in that giant ass jug. thanks broskie! sick vidz as always!
I’m a professional Powdercoater you would have been fine without heating the wheel up. The spots is called de-ionization it’s spot where the electric current swirls a good way to keep those from happening is distance and angle. Try to move the gun closer and further away while shaking the gun side to side.
Also Powdercoating while the rim is hot is another way to make sure the paint lays down good but be careful because build up like you had will make it run just like normal paint
I really missed seeing you driving and hearing the insane exhaust sounds. Please try to add more segments of you driving
I would highly recommend that you replace the metal "duck bill" to a poly head on the tire buster. Last thing you want is to scratch your rims. Throw in a plastic scraper for the stickem' weights as well.
You can spray the black, bake, spray the clear, and use a glove/ microfiber/ q tips to get all the powder out of places you don’t want it
What you could do is mask off the wheel with just painters tape, use spray the spokes with clear but then remove the tape before baking it, in turn also removing the excess clear spray before it goes into the oven.
So glad the FRS getting some love 🙌🏽 it’s the reason I found this channel!
To get a two tone you could probably do what you did except remove the tape before baking. If that leaves residue and still doesn’t work, you could just use sheets of printer paper to “mask” off the litter barrell/lip and tape them to the wheel with a less aggressive tape like scorch tape and again remove the paper before baking. This way you don’t have to meticulously wipe off powder.
Green was nice, but she is 🔥 with the gloss black! Appreciate seeing a few pulls with the Evo X as well. Hope you and Bobbi had a good Thanksgiving
Between you , smeedia and bader its like one big happy family... you guys videos are def something i look forward to everyday
Would be nice to repaint the FRS, as the Sus-TI was when warmer weather returns to the Great Northwest. 🙏
I think the center caps will look fine even with the wrap it's just a nice little bit of contrast on the all black wheels it doesn't have to all be perfectly matchy matchy it might be sick to do a colored decal on one or a couple of the spokes tho
i’m so impressed that you do all of this stuff on yourself bro! i might have to buy something just to support! also if you ever did a car giveaway that would be so sick since your builds are insane and so well put together 🔥
A matte black wrap would look dope . I did like the green rims but I'm loving it murdered out
Looking forward to this transformation 😃👌🏼
Bro federal engines is local to you and does free delivery to your area they are jdm motors you should look into them for a stock low mileage motor for rose to build
Finally the FRS is getting a complete make over its been way to long for a wait for this special moment those vasyn merch such a banger 👌💯
That all black looks good on the FRS!
Devin, the new drop is fire, and I can’t wait to see the frs completely done with the new wrap, seen the sneak peak on IG, and I think you should powder coat the center caps the color you wanted to do the faces of the wheels!!!🧐🤝
Would it be easier to spray Casper white and then do the lips black and wipe off the excess black from the spokes? I feel like that’s less clean up
I'm saving money to buy a gen 1 GT86, which means everytime you do a FRS video, i watch right away to learn something new and have fun at the same time. Thank you Devin, can't wait to see the wrap
Same here bro!
Same here man. He’s the reason why i bought mine!
@@tristandaniel You have a GT86 or BRZ ? That's so cool, not gonna lie, i'm a little jealous hahaha, can't wait to buy one.
@@gabrielvk8073 its a limited edition series yellow brz! It’s honestly one of the best cars. Such a fun car to drive although lacking a bit power but still fun
Does it stink when the powder is cooking in the oven? I'd like to try this, but my wife hates chemical smells in the house.
The ride is looking great even before the new wrap. 🔥
Appreciate you for dropping videos especially with the FRS. You’re the reason why I bought a BRZ 🙏🏻
Where does one get themselves a drum of paint stripper and at one point does it need to be changed out?
the half wrap evo 10 is my favorite car of your but, the sneak peak of the FRS wrap on the IG page might have changed my mind
The x needs a chag tune cause that torque seems a lil low
The car looks a MILLION times better with the all black holy shitake . Added +40 elegance and class while still mean as shit . The greenies were a lil too hot boy for my taste so I am glad you went all black ! Can't ever go wrong with all black !
Get some Black Vasyn centre cap decals made up 🤔 new merch product aswell perhaps 😁
FRS gonna look sick with new camo wrap! Hope u and Bobbi had a pleasant Thanksgiving
Use some stiff pieces of paper/poster board/cardboard as a collar and eliminate the possibility of it spraying around without having to mask off the entire wheel.
They do sell all black centre caps
The all black definitely looks good 👍
I’m NOT the biggest fan of black paint or wrap on cars🤔. However those wheels in black w the black wrap & the chartreuse sherbet calipers LOOKS FREAKING STEALTHY🤔😎👌🏻.
What was in that bucket he dropped the wheel into to take the paint off
Love that blacked up look
The wheel would’ve looked sick with that clear. Makes me want to learn powdercoating myself
Looks so much meaner black , love it
You should do the hardware delete on the wide body kit like you did on the Susti
Work wheels does make black center caps tho?
Are FRS and BRZ’s fun to drive? If so how good are they on fuel efficiency
Ik u gonna wrap it but u gotta say all black fits it well
Hey Devin can we get long sleeves next drop?
yes please
Can't wait to see the new wrap
Use sheets of paper behind the spokes on the barrel
Couldnt you just spray the gloss, mask up the gloss, spray the middle with the matte and then remove the tape before putting it in the oven again?
What is in the paint stripping solution and why does it look like wet garbage?
Anyone got the link to the sprayers he uses ? I remember he talked about them in a video , I don’t remember which.
00.40 lol I though the evo 9 got a new back wing lol
Hey man, why don’t you take and wrap the lip with the camouflage you are wrapping the car with?? Might look cool
That black powdercoat looks mint 👌🏻
I wish I was able to power coat my calipers that green color
Hell yeah for the drop!
Why don’t you drive the blue evo?
Great video I know the car will be looking right when all said and done.👍👍👍😎😎😎
Wrap the caps black?
You wouldn't do hidden hardware on the frs! 😄
I like the black 🔥💯👌🏽
Wow all in black looks real good
Can someone tell me what Vasyn means?
Let’s go bing always a gd time love it watching from uk 🇬🇧
next video you use the chemical stripper, can you please share what it is and where you find it? im tired of hand sanding all my parts. sand blaster is a must ues, but so is knowing what this chemical stripper is in that giant ass jug. thanks broskie! sick vidz as always!
Nice banger Dev! When are we going to view your content in 4K?!?
The all black kinda fire
Look so gaddamn good on black
Blue camo 🔥
They look way better in black 😍
looks awesome all gloss black! i want to know whats in that "stripper" bucket! i need that stuff!
Keep it black!!! Looks really sick 💪
Matte clear barrels and gloss face.
I reckon just leave them all black they look dope !!!!!
are you gonna do hidden widebody hardware with the new wrap?
Blacked out looks dope
Damn man. It looked sick matted. U should try that again.
Looking good
The new wheels are fucking sick I love them more need to re do the brakes. Good job.
Now that's Hard!!! Murdered Out!!!
You should keep the Supra Black Themed that’d be fire
My thoughts on the FRS I'm gonna call it the bat coupe lol 🤣👍love it bro she's super sexy
Those hoodies are dope!!!
🔥 Enough said
*Mantap Cak*
What is the powder coat stripper called?
Devin…it’s time to up your powder coat oven game bud!
freaking awesome 👌
this looks really sick!
Can’t be the end !!
Straight 🔥🔥🙌🏼.
ALL BLACK frs is tough
Legendary
Bagged batmobile!! 👍
Sick bro
I like those coffee pods
"stripper tank" just sounds like a holding cell for strippers...🤣
wheels look awesome bro....well before the unmasking...Lol
Oh my 🔥🔥🔥🔥
Paint it white to match sti 🤘👌
make 4xl shirts and hoodies
I think it would look good with lambo doors.
Yes!!!!!!
Anyone think the Brother Devin should consider dropping a sequential gearbox in the fastboiiiiiii Evo X or naw my fams
Hell yeah brother
You sir are a man of vision
im not an expert yet but i dont think running 2 lug nuts per wheel is pretty safe