Outstanding! I’m getting back into the hobby after learning to fly when I was 12, now at 43 I’m getting back into the hobby with my kiddos. I chose the TX16s knowing there were channels like yours that have the knowledge and teaching abilities to help guide others through these new technologies. Outstanding channel, and outstanding teaching abilities, very grateful for your knowledge and willingness to share it!
Great hobby to share with kids. Good luck with the learning. Once the lightbulb clicks on with EdgeTX it all gets pretty easy. Stick with it--totally worth the effort to learn.
you really are the best at this! The edge devs are FABULOUS peeps for bringing all this to us, but without you we would not know the things we are able to do and you illustrate everything clearly and without any nonsense!
When you really should be getting countrylife chores done, but choosing to spend 50min just watching and listening, not even actually doing a setting-up-along (might have made that up). I mean life choices, I'm ok with this choice. 😏. The in depth details on the info presented, just makes it so easy to understand and looking forward to setting up and trying custum options. Thx John, for doing what you do.👍
When you're just getting back into it, EdgeTX 2.9 drops and you're now just waiting for a new(er) video to come out on setting up aircraft with 2.9. Not just anyones video though, an RCVR video production specifically. The wait is finally over, well worth it. 🙂👍 I still only have a RCVR-2 to setup in 2.9 & desk fly, but still, its all about the journey.
Beginner tip, which I learned the hard way, moving from a rudder/elevator plane, to an aileron/elevator/rudder plane. Start with the rates on the aileron about 20%, and add a rudder mix. That, or watch your plane rollover and turn into match sticks. I had no help in the learning experience, and had a nice pile of match sticks from a few planes...
I really enjoy your out takes. Your presentation leaves one thinking that making videos is easy and your out-takes suggest it's really not. At least not without a lot of practice and hard work. Great video! Certainly one to revisit a few times. Thanks!
I Can't believe how similar you have your setup to mine. I used to have my throttle lock on a switch too but after a little incident that broke my prop on my forearm I now have a logical switch so I have to press t5 and t6 down for 1sec to toggle throttle lockout. Works fab and I cant knock it again.
Thanks for the help. Been out of the hobby for 15 years and saw the TX16s and thought "man that looks nice and capable." Unfortunately the radio's complexity has made me feel a bit less than capable. So much to learn, and you have explained it very well. Thanks!
@@RCVideoReviews I successfully binded my ER5A v2 and have my 5th channel as the second aileron servo. Any idea why only the channel 5 servo is acting like it is on a switch? Move the stick a fraction and it moves the servo all the way. Release stick and it speeds back the opposite way. The channel 1 servo is working properly. I left the input section alone and added servo 5 on channel 5 of mixes using the aileron (output? triangle icon) as source. Didn't change anything else. Could you point me in the right direction? Thanks!
You need to join our discord and ask questions like this there. UA-cam is a terrible platform for help. The answers is Ch5/Aux1 an arm switch in ELRS. It's a binary channel unless you use 333hz 16/2. See this guide for more info: www.expresslrs.org/software/switch-config/ And definitely join discord.
@@RCVideoReviews Thank you so much! I switched over to 333hz 16/2 and no more ch5 servo problem. I also set up discord for any future needs. Thanks again for the help!
Been on the sidelines for a bit now so will use this as a bit of a refresher on a couple of new birds that need setting up, good for the mind 😊, Also could do with a slight elevator / throttle mix as on full power my boomerang 60 wants to go skyward on full power, that or maybe go back watch the instant trim switch may work hmmm 🤔
I know of people that have entire flights slapping instant trim. In full sized planes we constantly trim the plane. Or flight modes :P or a mix, or ......
Hi. Really super as always. Might be worth mentioning that reversing the output on the throttle does not revere the direction of the prop but changes between full and off throttle. This can catch the foolish (me for example) unawares with an instant unexpected runaway throttle. Kind Regards
First of all, let me tell you what a BIG help you have been helping me get thru the transition from Spektrum to open-source programming. That been said, about the arming switch; what does the arming actually do. I only fly fixed wing planes; do I need to add a switch to be able to turn the arming channel on and off? Another, thank you; keep the videos flowing.
Arming for ELRS basically prevents lua script changes to the radio setup and turns dynamic power on. There are a few other minor bits, but those are the two big ones.
As a new user of EdgeTX this has been an excellent tutorial. For the Logical switches could you possible list your settings for LO3 (51 mins) as I just want to make sure I have the same settings.
Great job, thank you for this video (and all the others). Suggestion if it makes sense: let us know when a feature is not available in the BW radios. No need to cover the differences in the step-by-step instructions. For example, when talking about labels or widgets you might mention those are not available on BW radios. Great stuff in any form and always appreciated.
I appreciate the suggestion, but TBH, people who use color screens don't all care what goes on with B&W screens. Some do, some don't. So I've been experimenting with B&W videos and Color Screen radios.
This video has been indispensable for seeing up my new radio. Thank you so much for sharing your settings. I have a plane in which I am using both 3s and 4s battery packs. Any ideas on how you would set up the logic switches for the rxbat with two different pack voltages in the same model? Thanks!
Maybe you already found the answer but i guess i would made a copy of the model creating an identical one and i would change the names and the voltages for the alarms.
Lo mejor de Edge tx y aviones RC 🎉. He notado que tú radio iba muy lento cuando estabas utilizando la pantalla para buscar y seleccionar el modelo, se mantiene todo el tiempo lento? Yo pasé de Edge tx 2.8.3 multilingüe español a 2.8.5 no multilingüe y esta última me puso el radio muy muy lento así como a ti. Luego pasé a Edge tx 2.8.5 multilingüe español y todo arreglado, sigue funcionando bien luego del cambio. Añadir que yo cuido de no tener saturada la micro SD, solo tengo dos modelos guardados, 4 temas y el paquete de Audi en español. Dejé solo 4 fotos de modelos.. o sea descarto el tema de lentitud por problemas de la tarjeta. Saludos desde Cuba 🇨🇺
Hey there firstly THANK YOU for your time and effort. I fly edf jets with gyros like hobby eagle and freewing e51 (both essentially the same thing) do I turn off ADC filter since I’m using a gyro? I’m just a bit confused. Fwiw I’m using the internal RF (Flysky AFHDS 3 el18).
The explanation about the vbatt telemetry was amazing! Can't wait to add this to my other models. Does 6 seconds work as well on drones and helis as it does on planes?
It's a little bit more dependent on current draw than anything else. That said, I've been using the 6s delay on just about everything: Helis, Quads, Planes, and it's oddly good at getting me on the ground with about 3.8v/c after a few minutes of rest. It could go lower, but I keep a little fuel in the tank in case I need to make a few go-rounds'
Fantastic video tutorial, im going trough the process of changing radio and i need to configure some planes from beginning and i didn't do that for years, and your video giving me good guide how to do it. are you have installed different sound pack? i cant find sound for insttrim and i checked sound packs from Edge TX and Amber sound pack.
You should join discord. I use the stock EdgeTX sound pack but then make my own Emily sounds as necessary. I have an #emily-requests channel too, so if you need something, I can make it.
First, thank you for the details in your videos. I'm in the process of moving from Spektrum to EdgeTx (Radiomaster) and your videos have been very helpful. I do have one question, I can't find the wav file... "instrim" in the sound folder. My radio is new and it came with 2.7 and using your process I upgraded to 2.9. Thanks again...
I'm not sure if the default sound pack includes instant trim or not. In any case, it's probably in the #emily_requests channel on my discord and if not, I can make it. You have to join discord (link in every video description).
Excellent video! Is there a way to set up failsafe on the TX16S with the external ELRS Ranger Micro module and Radio Master ER6 ERLS receiver? Thank you!
Hi there - very informative and thankyou. I'm looking for a way configure a switch that overides the throttle by say 3%. So if the throttle was at 50, or 80, or 100%, then by flicking the assigned switch, the throttle would change to 53, 83 or 103% respectively. Hope you can help ! - note im a newbie, and looking to apply this to EdgeTX in a Radiomaster Pocket
Hi would the logical switches work for me with an RCBoat ? I have a voltage sensor. I want it to alert me too when the battery gets to the charge voltage 3.8V as well ??? I'm guessing the throttle lock SH down would stop my boat motor from running. And when the SH switch is UP it's unarmed. I wish someone did a video setup up RC boats with the TX16S :(
Question New tx16s mk11 running edgetx, updated to v2.91, with 28 models imported from X9D all, .yml format. I have a continuous warning signal with a flashing dot on the top menu bar near the battery charge indicator. It has been suggested that it is a Binding warning signal. would u agree with that and have u any suggestion as to a fix. Regards Trevor in oz
Hello, Is it possible to use R9 Access on edgeTX? I only see R9 protocol option on the external TX module. OpenTX has the two options R9 and R9 Access , Im trying to migrate to edgeTX but I need the access option.
Would there be anyway you would consider making a video showing how to bind and set up a LEMON stabilizer in the RADIO. I know how to adjust and use the stabilizer I just cant seem to set it up on a switch to control it and a knob to adjust it. Grayson hobby did it for the lemon stabilizer PLus but it was in OPEN TX not edgeTX Ive followed their instructions but no go. You have a way of explaining these things that I can understand and follow.
I'm glad I'm able to help. Looking at the manual it says to put a switch on Ch7 or optionally Ch5 and Ch8 is gain. So that's what I would do. Just go into the mixer on Ch7 and set the source to a switch. Ch8, same thing, but use a knob. From there, you just need to figure out if the Lemon wants to see 998us - 2012us or 1500us - 2012us. I suggest joining us on discord for further discussion. Invite link is in every video.
Great video as always, quick question. I have a RadioMaster TX 16 S running 2.9 multi protocol. After binding my R88 receiver, if you’re too close to it with the radio it drops reception. Why does it always do that?
Sounds like swamping. Don’t keep your tx too close to your rx. Also check this out: Multi Protocol Module Frequency Fine Tune on Radiomaster TX16s MKII ua-cam.com/video/08W8usnP0dA/v-deo.html
Such great info 👍🏻 With the no sag voltage alert I fly multiple quads on the same setup most are 6s and 1 is 4s is there a way I can change voltage with some type of condition essentially recognising 6s/4s or make another model just for 4s? Thank you 6:00
Just use a single cell voltage and pull from one cell instead of the pack. Then you could set 3.6v or whatever for all models. Downside is you are using the value of one cell. Alternatively, you could use a 4s value for all, and just plug your vbat in so you only pickup cells 1-4 no matter what model. That's probably what I'd do.
@@RCVideoReviews Arh yes that will work with my plane as I’ve got single cell tel but I’ve got quads I fly on same model flying 4and 6s, with not individual cel voltage, just make another model for the 4s ones?
Have fun with your RCVR-2. Here are links to the hardware I used: Generic 9g Servos (10 pack): amzn.to/46nfJj6 Pushrod and Quick Connector Kit: amzn.to/3ponh4w
Hi dear can tell did you work on new version 2.10 , did make some videos about this new version , is this new version good , pls send link if you did some work or make videos
Thank you for always providing good information. I have one question for you. I always use the independent trim for Flight Mode when setting up flaps. In this case, a delay of 1 second is given to the flap servo, and a delay of 1 second is also given to the mode change so that the flap moves gradually. The recently set F-16 plane is used with the Elevator set to Flapperon and the Elevator set to Elevon, but there is no problem with the operation, but I could not find a way to give a 1 second delay. Is there any good way to solve it?
Thank you for your comments. But I haven't been able to figure out the right way yet. It works slowly with the edge feature you mentioned. However, it works only as long as the time set at the bottom and returns to its original position. what did I do wrong? I'm planning to set up the Freewing F-14 with flaperons to the ailerons. I don't want to operate with a control surface that moves in an instant. I am asking for your help. Thank you.
I'm on Edge 2.7 running the carbon theme. When I upgrade Edge, it totally messes up my screen/theme. Is there any advise on how to transition the upgrade and preserve my screen/theme settings and layout? I really want the features of the new version but I also really like the look of carbon.
I have a question. @37:00 or so you talk about inverting your outputs. Is there a reason you don't do that for your arm switch instead of setting it -100 in the mixer?
Not really. Good point, based on the philosophy of reversing in outputs this makes sense. I think the mental gymnastics going on in my head were I don't really think of arming/disarm as a broadcast/rf thing (even though it is for ELRS and for models with FCs), I always think of it as a local thing to the radio (as in throttle lock/unlock) so for that reason, I never considered arm as an "output" leaving the radio, so adjustments to me are done before outputs. Anyway, it's a good catch and would certainly do the job. As with most things on EdgeTX, there are a half dozen ways to accomplish things on the radio.
@@RCVideoReviews coming from quads I guess it's just a natural way to do it. Have had to do a bit of thinking with the elrs way of arming and doing something very similar to JB's gazillion modes on one aux thing. 😅 Currently working on a long range atomrc dolphin that getting converted to functional v-tail
RxBt is telemetry and is dependent on the receiver you use. In my case it's an ELRS receiver which provides RxBt telemetry. If you're using an ELRS Rx with RxBt, you have to go to the telemetry page and discover sensors. After that, you should see RxBt as an option.
In the video, find the section for mode, repeat that on the retracts channel using a 2 position switch or a slider (which is what I use). Just put one switch on the mix line connected to your retracts.
EdgeTX is not the sole determining factor of supported RF protocols. It depends on the RF transmitter module in your radio too. For example, ELRS transmitters can bind with ELRS protocol receivers and nothing else. The 4in1 module can bind with receivers using the protocols on this page: github.com/pascallanger/DIY-Multiprotocol-TX-Module/blob/master/Protocols_Details.md
This is so confusing to a noob like me. I think I get the gist of it tho. I'm looking to get a tx16s, does that need additional modules to be used or does it operate in some form as standard out of the box? Planning to fly a conscendo evolution 1.5 with it if it is compatible.
I have a question, i have this little plane that has 3 modes, beginner, intermediate and manual . What i want is when i put it in manual mode i want a rate of movement and expo just for manual mode only .so when i go lets say back to beginner mode the rate movement and expo aren't there
You have to have rates on all modes. With no rates, you have no movement. You should join discord to discuss further. UA-cam is a terrible platform for dialogue like this. Rates are not assign a channel. If you want whatever rates/expos to travel with your mode switch, you use the mode switch in inputs to make adjustments to rates/expos whatever they happen to be.
You'll have to be more specific. ELRS and 4in1 are both RF transmitters with very different setup procedures. I highly suggest you join my discord. Link is in every video I post.
![Radiomaster TX16s • How-to setup an RC Plane with OpenTx Plane Setup Wizard • [Beginners]](http://i.ytimg.com/vi/kHi47f3rO80/mqdefault.jpg)
Outstanding! I’m getting back into the hobby after learning to fly when I was 12, now at 43 I’m getting back into the hobby with my kiddos. I chose the TX16s knowing there were channels like yours that have the knowledge and teaching abilities to help guide others through these new technologies. Outstanding channel, and outstanding teaching abilities, very grateful for your knowledge and willingness to share it!
Great hobby to share with kids. Good luck with the learning. Once the lightbulb clicks on with EdgeTX it all gets pretty easy. Stick with it--totally worth the effort to learn.
you really are the best at this! The edge devs are FABULOUS peeps for bringing all this to us, but without you we would not know the things we are able to do and you illustrate everything clearly and without any nonsense!
Thank you. Appreciate the kind comment.
When you really should be getting countrylife chores done, but choosing to spend 50min just watching and listening, not even actually doing a setting-up-along (might have made that up). I mean life choices, I'm ok with this choice. 😏. The in depth details on the info presented, just makes it so easy to understand and looking forward to setting up and trying custum options. Thx John, for doing what you do.👍
Thanks for the nice comment. Glad to help and glad the info is helpful to you.
Fantastic tutorial. But as a newbie, i need to watch it multiple times. Thanks
When you're just getting back into it, EdgeTX 2.9 drops and you're now just waiting for a new(er) video to come out on setting up aircraft with 2.9. Not just anyones video though, an RCVR video production specifically. The wait is finally over, well worth it. 🙂👍
I still only have a RCVR-2 to setup in 2.9 & desk fly, but still, its all about the journey.
Exactly, take your time, enjoy the ride.
Beginner tip, which I learned the hard way, moving from a rudder/elevator plane, to an aileron/elevator/rudder plane. Start with the rates on the aileron about 20%, and add a rudder mix. That, or watch your plane rollover and turn into match sticks. I had no help in the learning experience, and had a nice pile of match sticks from a few planes...
I really enjoy your out takes. Your presentation leaves one thinking that making videos is easy and your out-takes suggest it's really not. At least not without a lot of practice and hard work. Great video! Certainly one to revisit a few times. Thanks!
Thank you for the kind comment. Glad you like the bloopers. :)
I Can't believe how similar you have your setup to mine. I used to have my throttle lock on a switch too but after a little incident that broke my prop on my forearm I now have a logical switch so I have to press t5 and t6 down for 1sec to toggle throttle lockout. Works fab and I cant knock it again.
Thanks for the help. Been out of the hobby for 15 years and saw the TX16s and thought "man that looks nice and capable." Unfortunately the radio's complexity has made me feel a bit less than capable. So much to learn, and you have explained it very well. Thanks!
Take your time with it. Keep watching videos and play along. Before long, a light will click on and you'll know what to do.
@@RCVideoReviews I successfully binded my ER5A v2 and have my 5th channel as the second aileron servo. Any idea why only the channel 5 servo is acting like it is on a switch? Move the stick a fraction and it moves the servo all the way. Release stick and it speeds back the opposite way. The channel 1 servo is working properly. I left the input section alone and added servo 5 on channel 5 of mixes using the aileron (output? triangle icon) as source. Didn't change anything else. Could you point me in the right direction? Thanks!
You need to join our discord and ask questions like this there. UA-cam is a terrible platform for help.
The answers is Ch5/Aux1 an arm switch in ELRS. It's a binary channel unless you use 333hz 16/2. See this guide for more info: www.expresslrs.org/software/switch-config/
And definitely join discord.
@@RCVideoReviews Thank you so much! I switched over to 333hz 16/2 and no more ch5 servo problem. I also set up discord for any future needs. Thanks again for the help!
Been on the sidelines for a bit now so will use this as a bit of a refresher on a couple of new birds that need setting up, good for the mind 😊,
Also could do with a slight elevator / throttle mix as on full power my boomerang 60 wants to go skyward on full power, that or maybe go back watch the instant trim switch may work hmmm 🤔
I know of people that have entire flights slapping instant trim. In full sized planes we constantly trim the plane. Or flight modes :P or a mix, or ......
Hi. Really super as always. Might be worth mentioning that reversing the output on the throttle does not revere the direction of the prop but changes between full and off throttle. This can catch the foolish (me for example) unawares with an instant unexpected runaway throttle. Kind Regards
Yeah, you do not want to do that. If you need to change your motor direction, just switch two of the three leads between the ESC and motor.
First of all, let me tell you what a BIG help you have been helping me get thru the transition from Spektrum to open-source programming. That been said, about the arming switch; what does the arming actually do. I only fly fixed wing planes; do I need to add a switch to be able to turn the arming channel on and off? Another, thank you; keep the videos flowing.
Arming for ELRS basically prevents lua script changes to the radio setup and turns dynamic power on. There are a few other minor bits, but those are the two big ones.
Thank you Sir.@@RCVideoReviews
You're welcome.
Thanks John. This video was really very helpful. Have a great weekend
Thank you! Glad you found it helpful. Appreciate the comment.
Awesome review simplified. But I'm all drones and will remain drones. Still learning about the new edgetx.
A lot of what's in that video can be used on really any type of model. Even drones get setup with AETR. Thanks for the comment.
As a new user of EdgeTX this has been an excellent tutorial. For the Logical switches could you possible list your settings for LO3 (51 mins) as I just want to make sure I have the same settings.
Great job, thank you for this video (and all the others). Suggestion if it makes sense: let us know when a feature is not available in the BW radios. No need to cover the differences in the step-by-step instructions. For example, when talking about labels or widgets you might mention those are not available on BW radios. Great stuff in any form and always appreciated.
I appreciate the suggestion, but TBH, people who use color screens don't all care what goes on with B&W screens. Some do, some don't. So I've been experimenting with B&W videos and Color Screen radios.
Could you do a setup video on 2.9 for helicopters please
This video has been indispensable for seeing up my new radio. Thank you so much for sharing your settings. I have a plane in which I am using both 3s and 4s battery packs. Any ideas on how you would set up the logic switches for the rxbat with two different pack voltages in the same model? Thanks!
Maybe you already found the answer but i guess i would made a copy of the model creating an identical one and i would change the names and the voltages for the alarms.
Lo mejor de Edge tx y aviones RC 🎉.
He notado que tú radio iba muy lento cuando estabas utilizando la pantalla para buscar y seleccionar el modelo, se mantiene todo el tiempo lento?
Yo pasé de Edge tx 2.8.3 multilingüe español a 2.8.5 no multilingüe y esta última me puso el radio muy muy lento así como a ti. Luego pasé a Edge tx 2.8.5 multilingüe español y todo arreglado, sigue funcionando bien luego del cambio.
Añadir que yo cuido de no tener saturada la micro SD, solo tengo dos modelos guardados, 4 temas y el paquete de Audi en español. Dejé solo 4 fotos de modelos.. o sea descarto el tema de lentitud por problemas de la tarjeta.
Saludos desde Cuba 🇨🇺
Brilliant video and ETx 2.9 guide/preview. Cheers mate
Thank you!
Great video! Your explanation is always good. That some differences to EdgeTX 3.0 or new variants?
Hey there firstly THANK YOU for your time and effort. I fly edf jets with gyros like hobby eagle and freewing e51 (both essentially the same thing) do I turn off ADC filter since I’m using a gyro? I’m just a bit confused. Fwiw I’m using the internal RF (Flysky AFHDS 3 el18).
The explanation about the vbatt telemetry was amazing! Can't wait to add this to my other models. Does 6 seconds work as well on drones and helis as it does on planes?
It's a little bit more dependent on current draw than anything else. That said, I've been using the 6s delay on just about everything: Helis, Quads, Planes, and it's oddly good at getting me on the ground with about 3.8v/c after a few minutes of rest. It could go lower, but I keep a little fuel in the tank in case I need to make a few go-rounds'
Can you please create a similar video for B&W Edge TX transmitters with 4 in 1 internal RF?
Fantastic video tutorial, im going trough the process of changing radio and i need to configure some planes from beginning and i didn't do that for years, and your video giving me good guide how to do it. are you have installed different sound pack? i cant find sound for insttrim and i checked sound packs from Edge TX and Amber sound pack.
You should join discord. I use the stock EdgeTX sound pack but then make my own Emily sounds as necessary. I have an #emily-requests channel too, so if you need something, I can make it.
First, thank you for the details in your videos. I'm in the process of moving from Spektrum to EdgeTx (Radiomaster) and your videos have been very helpful. I do have one question, I can't find the wav file... "instrim" in the sound folder. My radio is new and it came with 2.7 and using your process I upgraded to 2.9. Thanks again...
I'm not sure if the default sound pack includes instant trim or not. In any case, it's probably in the #emily_requests channel on my discord and if not, I can make it. You have to join discord (link in every video description).
With your balsa model, what did you use for the hinges? Just received the kit and it is awesome. Did you just use a thread of some sort?
Yup, thread.
You rock. Thanks!
Mooi hoor!
Ik zie dat sommige mensen hem bedekken met glasvezel. Heb jij dat ook gedaan?
Excellent video! Is there a way to set up failsafe on the TX16S with the external ELRS Ranger Micro module and Radio Master ER6 ERLS receiver?
Thank you!
Yes, in the webui of the receiver on the model tab.
Thank you!
Hi there - very informative and thankyou. I'm looking for a way configure a switch that overides the throttle by say 3%. So if the throttle was at 50, or 80, or 100%, then by flicking the assigned switch, the throttle would change to 53, 83 or 103% respectively. Hope you can help ! - note im a newbie, and looking to apply this to EdgeTX in a Radiomaster Pocket
I'd probably use a mix and and offset based on GV activated by the switch.
Hi would the logical switches work for me with an RCBoat ? I have a voltage sensor. I want it to alert me too when the battery gets to the charge voltage 3.8V as well ??? I'm guessing the throttle lock SH down would stop my boat motor from running. And when the SH switch is UP it's unarmed. I wish someone did a video setup up RC boats with the TX16S :(
Hi do you have a video for flaperon setup? Thanks a lot
I didn't know about the instant trim feature. I was wishing for exactly that feature and I had it all along. Heh!
Now the question is where to put it since I use my only momentary for timer reset when I slope soar.
The RM DIY momentary switch is a nice upgrade. You can also turn off t5/t6 as trim in flight modes and gain 4 more momentary switches: T5u/d, T6u/d.
@@RCVideoReviews I have a Mark 1. So I don't think the DIY switch is an option. But I'll definitely try the extra trim switch trick!
How did you get the widgets to display 34M18S format on your TotTime and FltTmr display. I cannot seem to find that widget. thank you
Thank you this really helps
You’re welcome. Glad to help.
I love your radio
Thanks!
Question New tx16s mk11 running edgetx, updated to v2.91, with 28 models imported from X9D all, .yml format. I have a continuous warning signal with a flashing dot on the top menu bar near the battery charge indicator. It has been suggested that it is a Binding warning signal. would u agree with that and have u any suggestion as to a fix. Regards Trevor in oz
Hello, Is it possible to use R9 Access on edgeTX?
I only see R9 protocol option on the external TX module.
OpenTX has the two options R9 and R9 Access , Im trying to migrate to edgeTX but I need the access option.
Would there be anyway you would consider making a video showing how to bind and set up a LEMON stabilizer in the RADIO. I know how to adjust and use the stabilizer I just cant seem to set it up on a switch to control it and a knob to adjust it. Grayson hobby did it for the lemon stabilizer PLus but it was in OPEN TX not edgeTX Ive followed their instructions but no go. You have a way of explaining these things that I can understand and follow.
I'm glad I'm able to help. Looking at the manual it says to put a switch on Ch7 or optionally Ch5 and Ch8 is gain. So that's what I would do. Just go into the mixer on Ch7 and set the source to a switch. Ch8, same thing, but use a knob. From there, you just need to figure out if the Lemon wants to see 998us - 2012us or 1500us - 2012us.
I suggest joining us on discord for further discussion. Invite link is in every video.
Will do! Thank you for your response.@@RCVideoReviews
Great video as always, quick question. I have a RadioMaster TX 16 S running 2.9 multi protocol. After binding my R88 receiver, if you’re too close to it with the radio it drops reception. Why does it always do that?
Sounds like swamping. Don’t keep your tx too close to your rx. Also check this out: Multi Protocol Module Frequency Fine Tune on Radiomaster TX16s MKII
ua-cam.com/video/08W8usnP0dA/v-deo.html
Such great info 👍🏻 With the no sag voltage alert I fly multiple quads on the same setup most are 6s and 1 is 4s is there a way I can change voltage with some type of condition essentially recognising 6s/4s or make another model just for 4s? Thank you 6:00
Just use a single cell voltage and pull from one cell instead of the pack. Then you could set 3.6v or whatever for all models. Downside is you are using the value of one cell. Alternatively, you could use a 4s value for all, and just plug your vbat in so you only pickup cells 1-4 no matter what model.
That's probably what I'd do.
@@RCVideoReviews Arh yes that will work with my plane as I’ve got single cell tel but I’ve got quads I fly on same model flying 4and 6s, with not individual cel voltage, just make another model for the 4s ones?
My TX16S with 2.9.4 firmware doesn't have the track "instrm" where would i get that from? thank you
Just purchased your balsa plane model. Which servos and control rods did you use so I can order them. Thanks!
Have fun with your RCVR-2. Here are links to the hardware I used:
Generic 9g Servos (10 pack): amzn.to/46nfJj6
Pushrod and Quick Connector Kit: amzn.to/3ponh4w
Hi dear can tell did you work on new version 2.10 , did make some videos about this new version , is this new version good , pls send link if you did some work or make videos
So I don't have the word telemetry to choose like you have for L05, so I guess I can't do any this if I can never tell it to look for telemetry?
Tele is a hard coded entry. It's not config/hardware dependent. On my radio it shows up between FM2 and 1RSS.
Thank you for always providing good information.
I have one question for you.
I always use the independent trim for Flight Mode when setting up flaps.
In this case, a delay of 1 second is given to the flap servo, and a delay of 1 second is also given to the mode change so that the flap moves gradually.
The recently set F-16 plane is used with the Elevator set to Flapperon and the Elevator set to Elevon, but there is no problem with the operation, but I could not find a way to give a 1 second delay.
Is there any good way to solve it?
Make the activating switch a logical switch, define the logic switch as an Edge switch with a delay.
Thank you for your comments.
But I haven't been able to figure out the right way yet.
It works slowly with the edge feature you mentioned. However, it works only as long as the time set at the bottom and returns to its original position.
what did I do wrong?
I'm planning to set up the Freewing F-14 with flaperons to the ailerons.
I don't want to operate with a control surface that moves in an instant.
I am asking for your help.
Thank you.
For beginners I need find how bind model with spectrum receiver dsm2
I'm on Edge 2.7 running the carbon theme. When I upgrade Edge, it totally messes up my screen/theme. Is there any advise on how to transition the upgrade and preserve my screen/theme settings and layout?
I really want the features of the new version but I also really like the look of carbon.
Are you using 2.9.2? There were some theme fixes post 2.9.0.
I have a question. @37:00 or so you talk about inverting your outputs. Is there a reason you don't do that for your arm switch instead of setting it -100 in the mixer?
Not really. Good point, based on the philosophy of reversing in outputs this makes sense. I think the mental gymnastics going on in my head were I don't really think of arming/disarm as a broadcast/rf thing (even though it is for ELRS and for models with FCs), I always think of it as a local thing to the radio (as in throttle lock/unlock) so for that reason, I never considered arm as an "output" leaving the radio, so adjustments to me are done before outputs. Anyway, it's a good catch and would certainly do the job. As with most things on EdgeTX, there are a half dozen ways to accomplish things on the radio.
@@RCVideoReviews coming from quads I guess it's just a natural way to do it. Have had to do a bit of thinking with the elrs way of arming and doing something very similar to JB's gazillion modes on one aux thing. 😅
Currently working on a long range atomrc dolphin that getting converted to functional v-tail
Yeah, if it's going out via RF, outputs is where I usually invert things. Good luck with your Dolphin build.
I'd like to set up your SF16, but I don't find the RxBt value.
RxBt is telemetry and is dependent on the receiver you use. In my case it's an ELRS receiver which provides RxBt telemetry. If you're using an ELRS Rx with RxBt, you have to go to the telemetry page and discover sensors. After that, you should see RxBt as an option.
Thanks!
I jest started using the radiomaster tx16s mark2 v4 and I have firmware 2.7.1 is it ok to update to the new version of firmware 2.9.4
Yes. Newest version is 2.10.2 as of right now.
Yet again a good video.
Anyway you could do a video on setting up retracts please.
In the video, find the section for mode, repeat that on the retracts channel using a 2 position switch or a slider (which is what I use). Just put one switch on the mix line connected to your retracts.
Im kinda new so please excuse me if i ask silly questions.
Can edge tx transmitters bind with almost any aircraft? Or only with certain receivers?
EdgeTX is not the sole determining factor of supported RF protocols. It depends on the RF transmitter module in your radio too. For example, ELRS transmitters can bind with ELRS protocol receivers and nothing else. The 4in1 module can bind with receivers using the protocols on this page: github.com/pascallanger/DIY-Multiprotocol-TX-Module/blob/master/Protocols_Details.md
This is so confusing to a noob like me.
I think I get the gist of it tho.
I'm looking to get a tx16s, does that need additional modules to be used or does it operate in some form as standard out of the box?
Planning to fly a conscendo evolution 1.5 with it if it is compatible.
@Doggy-B you need to join my discord. Link is in every video I post.
Thank you. I will indeed. I need a community that helps each other out. Google is not friendly in that regard.
I have a question, i have this little plane that has 3 modes, beginner, intermediate and manual . What i want is when i put it in manual mode i want a rate of movement and expo just for manual mode only .so when i go lets say back to beginner mode the rate movement and expo aren't there
Setup your inputs like I did in the video, but instead of using a "rate switch" use your "mode switch"
You have to have rates on all modes. With no rates, you have no movement. You should join discord to discuss further. UA-cam is a terrible platform for dialogue like this.
Rates are not assign a channel. If you want whatever rates/expos to travel with your mode switch, you use the mode switch in inputs to make adjustments to rates/expos whatever they happen to be.
@RCVideoReviews Ok , I figured it out, thanks for your help
Im a complete noob i have this Transmitter on the way but will this video help me with 4in1 as well or is elrs different setting up? Thanks
You'll have to be more specific. ELRS and 4in1 are both RF transmitters with very different setup procedures. I highly suggest you join my discord. Link is in every video I post.
@RCVideoReviews ok ill join thanks for the reply
I bought a eflite carbon z 150T that has the spektrum receiver pre installed and didnt know if i could use this video to go by since it isn't a Elrs.
I'll be happy to discuss further on discord.
How I can set Delta plane ??
Where do you get the additional sounds?
I make them using the MS Azure TTS service.
@@RCVideoReviews thanks for your reply. How much does this service cost? I would like to give it a shot
when i download and open it it flashes on the screen how can i fix this
You should join discord and elaborate a little. Invite is in the description of every video I post.
I hope there make setting up Helicopters easier .
I'm not sure what you mean by this, but I don't know of any efforts to change the heli tab configuration options.
How do I get my receiver bound to my transmitter!! Ahhhhh
No mention how to create second aileron channel
hate the pointer
Thanks!
Thanks for hitting the tip jar.
Thanks!
You bet! Thanks for hitting the tip jar. Appreciate it.