@@PBKreviews Hi, i asked a question about what about if u put pin injektor in ABOVE micropfone hole? The one above the phone, i did it by accident, when i realized , sim slot isnt even there, but on the bottom. on my S22+. Can u please conform, that as u said in video, mic hole on top of the phone has same protection as on below?? thanks u for the anser.
Oh my, I had accidentally inserted the SIM pin into the wrong hole and came here to check if I could have damaged anything. To my surprise you address exactly this in 6:42 ! Thank you!
Great work man i really appreciate the effort you put in so earlier before anyone else and have guts to disassemble the screen n bear the damage hats off to you Nice job of putting music in the end . Thanks for awesome video
Good video. I'd like to see a test with the standard S22 and the fps indicator on UA-cam, Netflix, HBO GO and when nothing on display is moving to check if they optimize display refresh rate and what is the real minimum refresh rate. You can find that option it in the developer settings.
Thanks, I tested that for someone and lowest it would go on S22 and the Ultra was 24. Not sure if its something they will enable via software update for it to go lower on the ultra.
@@PBKreviews no thank you I repair phones for quite some years now for myself to make a little side money and watching your videos before I tear apart a phone I never did before or someone wants a price on repairing 1 I look at your videos first so I know what I'm up against.
Just watched this video because I wanted to know if I messed up something for entering the sim pin in the wrong hole, you just got my thumbs up for specifying that I didn't mess up my phone 😅
If you go into any store that has them on display you can test them out yourself. That's exactly what I did at best buy, I went into Dev settings and enabled show refresh rate and the lowest i saw that it went was 24hz. I didn't see it drop below that but I also didn't test it out in every app. 24hz is still pretty low and should save plenty of battery since it switches very fast after interacting with the screen.
niiiiiiiice thank you so much!!! i also was wondering about haptic motor's location on S22 disassembly video and i'm really glad that you mentioned it here thank you so much
I want to ask you a question, since Samsung ditched the 3D ToF sensor for the rear camera, the question is how important is the 3D ToF sensor for photographic results? And is it a good idea for Samsung to ditch that sensor?, Even though the iPhone has a lidar sensor, but I'm happy because there is still a microphone beside the rear camera.
Today the 3D ToF sensor has no sense at all, because basically it's just a very low quality camera (2 mpix or even less). We already have another much much better cameras on the back of the phone: the ultrawide and telephoto, that will help the main sensor even better than very cheap sensor dedicated only for this. Lidar is another story, it's just faster than using other cameras to calculate the distance, that's why it's still on the back of the iPhone. TLDR: there are better options and ToF sensor are typical for cheap phones just to bump up the numer of camera modules to appear to be more premium.
Is that why there's a weird oval divot on the side rail of the phone, for the 5g antenna? I kept pushing it thinking it would pop out some kind of tray 😂 - usually they're just lines on the side rails.
Weird how Samsung only marketed the vapor chamber cooling system for the S22U when the S22+ uses it too. Do you know what cooling system the 3 S21 models last year used?
Hi man, thank you for this awesome video. May I know what you think about Samsung S22+ heat solution? I'm planning to buy this one but really worry about heat from Snap 8 gen 1. Thank you.
Nice video! But, Why in-display fingerprint sensor is different from s22 ultra ? In s22 ultra, the sensor is much bigger. I think samsung uses first gen sensor in s22 plus, am I right ?
Thank you for this. Not sure how hard it's going to be for a newbie but I'm thinking of replacing charging port/simtray. My sim card won't work and I can't afford another phone since I'm still paying this one off. Any good links for a replacement?
You're welcome. Shouldn't be too difficult. Just follow the video and skip any steps you don't need to do (like removing the motherboard). Here is a link for the replacement parts, scroll down you will see the sub board/charger port boards. Just make sure to order the correct one for your model phone. Since different model number/region versions will have different antenna contacts. www.mobilesentrix.com/replacement-parts/samsung/galaxy-s-series/galaxy-s22-plus
Hai, im just curious... if i accidentally poked up the microphone hole using sim ejector pin, what and where's the sim ejector pin actually hit up? Since the microphone and the gasket is actually located above the hole? Thanks in advance for your answers!
Does anybody know where to find a replacement screen for the new Samsung models? Preferably the S22+. Is it too early? Does Samsung offer to sell parts?
Hi guys. What's up? From what I understood in this video, there's a third mic, close to the flash LED. What's the purpose of that? Googled it, but haven't found an answer. Thanks and, btw, great job!
I dropped my Galaxy s 22 on the street. It fell off my truck bumper. I found it damaged. It had a case protector like a booklet. But it was still damaged. Is there any way to retrieve the pictures? Can it be taken apart and transplanted into another s22. So I can get the pictures? Please, I need your help
So I have the s22+ and with a lens protector on it makes the speakers crackle when the temp changes. So I took off the protector and it's fine now. Some say that the bottom lens let's air escape. My question is how.
Hi, I have an S22 Plus, is it normal that at medium brightness (20/40%), with gray backgrounds, I can see the halo of the proximity sensor even when not in use? I have two circles right next to that proximity sensor. Let's say that you only notice if you are in low light conditions and only with dark colors such as grays.
great video bro. i am in search of a galaxy s22 plus screen as well but the only ones i keep finding have the letter "E" in the top right corner. the one in your video and mine are the same with the letter "N"in the top right next to the tiny barcode. can you tell me where i can buy one ?
I am looking for the flex cable that goes to the 5g antenna same side as the volume keys and nobody seems to have it can you point me in a direction of getting 1 ? the part number is DP2515BH + also what is written on the cable is SM-906U MMV V REVD.7 Please and thank you
Yep, need to be more careful on working screens but some of these have such strong adhesive so most other tools are hard to use to pry it off. But if the screen was broken, then would have been much easier to just rip it off with other tools :)
Hi. This is the best dissasembly video from s22 series. I accidently poke with sim ejektor the hole that is in the top of the phone s22 plus. Can u tell me if there is no option for me to poke waterproofing and mic damage with. I was so exited with new phone i poke the hole on top where there even isnt location of the sim card slot. Thank u for the answer??
Just use a hair dryer and evenly apply heat so its hot to the touch. You don't need to do it for too long, since you can always apply more heat while your working you're way prying the back off. You can also use a suction cup tool to help you lift up on one corner or side to get a pry tool in.
well people replacing a screen are not replacing a working screen, I gave the score based on the ease of doing a replacement screen repair. Since you can just pry the screen off from the front without having to take the rest of the phone apart, it saves time and is easier to do. Also a broken screen you don't care about damaging it more so you don't really need to be careful with it and can just pry the thing off even if it breaks or damages more etc. Hope this explains it.
when I put it back together again leave it as it was mobile the camera stopped working it says camera failed I just had to reboot it to safe mode and then start it normally, but it is strange that it was not fixed with hard reset and with safe mode if it was fixed, it is surprising.
after you take apart the phone and have access to it, it has some glue around the camera holding it in place. You would need to use a sharp razor blade or knife to cut the glue and pull out the camera.
Who is watching this video after pushing the sim injection pin in the microphone to see if it was damaged? 🤣 Btw, huge thanks for explaining this as I was worried, now I can sleep in peace 😁
Yup it's soldered onto the sub board but the sub board is replaceable so there should be no problems. As long as its not soldered onto the main motherboard since they don't sell replacement motherboards. :)
I am impressed. s22 and s22 Plus teardowns and nobody else has even done one. Keep up the good work.
Thank you! :)
@@PBKreviews Hi, i asked a question about what about if u put pin injektor in ABOVE micropfone hole? The one above the phone, i did it by accident, when i realized , sim slot isnt even there, but on the bottom. on my S22+. Can u please conform, that as u said in video, mic hole on top of the phone has same protection as on below?? thanks u for the anser.
microphone is by side... no harm@@Bafurin
Your honesty while describing the disassembly and repair of the phone is impressive. It shows expertise and confidence! Thanks for the video.
Thank you and you're welcome!
0:54 That microphone and flash design is so cool, I'm surprised no one is mentioning it.
Oh my, I had accidentally inserted the SIM pin into the wrong hole and came here to check if I could have damaged anything. To my surprise you address exactly this in 6:42 ! Thank you!
same
me too , i was relieved to find out i didnt damage my new phone .
Thank you so much for explaining where haptic motor is located. Sorry to see your s22+ screen got compromised. Hope you can fix that.
You're welcome. Yeah I will probably have to wait till I can get a replacement screen and fix it :)
how much does it cost for the display ?
Great work man i really appreciate the effort you put in so earlier before anyone else and have guts to disassemble the screen n bear the damage hats off to you
Nice job of putting music in the end .
Thanks for awesome video
Thank you, I appreciate it :)
Insanely fast, awesome video as always!
Thank you!
Good video. I'd like to see a test with the standard S22 and the fps indicator on UA-cam, Netflix, HBO GO and when nothing on display is moving to check if they optimize display refresh rate and what is the real minimum refresh rate. You can find that option it in the developer settings.
Thanks, I tested that for someone and lowest it would go on S22 and the Ultra was 24. Not sure if its something they will enable via software update for it to go lower on the ultra.
On the s22 ultra the refresh rate can go down to 1hz
Thank you for such a detailed disassembly of the phone. Okay so the cooling system in the S22+ is done
You're welcome :)
Your teardowns of all phones plus voice quality and video resolution is perfect keep up the good work !!
Thank you!
@@PBKreviews no thank you I repair phones for quite some years now for myself to make a little side money and watching your videos before I tear apart a phone I never did before or someone wants a price on repairing 1 I look at your videos first so I know what I'm up against.
Just watched this video because I wanted to know if I messed up something for entering the sim pin in the wrong hole, you just got my thumbs up for specifying that I didn't mess up my phone 😅
:)
Nice video! Can you test the screen refresh rate of the S22 and S22+? I saw on twitter that samsung changed the minimum frequency from 10hz to 48hz.
If you go into any store that has them on display you can test them out yourself. That's exactly what I did at best buy, I went into Dev settings and enabled show refresh rate and the lowest i saw that it went was 24hz. I didn't see it drop below that but I also didn't test it out in every app. 24hz is still pretty low and should save plenty of battery since it switches very fast after interacting with the screen.
@@Flash363 the S22 is not yet available in my country. Maybe next week I can test it.
Yup, 24 was the lowest S22 and ultra went. Not sure if they will release an update down the line for the ultra for it to drop to 1 but we will see.
With the galaxy max hz app. The refresh rate will go down as low as 10hz. The 1hz which they advertised on s22 ultra is not true
Thank you for your great effort for the tech community
You're welcome! :)
the most clean tear down!!kudos
Wow Vapor chamber is here!!!!!
Very Good video
Thank you!
Thanks for the video. I've managed to replace the mainboard myself and I'm super happy!
niiiiiiiice thank you so much!!! i also was wondering about haptic motor's location on S22 disassembly video and i'm really glad that you mentioned it here thank you so much
You're welcome! :)
s22 teardown so amazing and in detailed explaned everything i like it . great work man keep going on!!!
Thanks, will do!
Ajoyib. Siz birinchisiz 👍
Thanks! :)
I poked the wrong hole (top hole) so it was a relief that you mentioned it is not a problem. Thanks!
You're welcome :)
你好，怎么没看见震动模块？
Hello, why don't you see the vibration module?
震动马达结合了扬声器
Its in the speaker assembly
Thanks for assuring us that the mic will be OK in case we by mistake poked it with the sim ejecter tool. Will it still be water proof?
Yes definitely it will still be waterproof.
Finally someone that shows the chip inside the phone
Awesome format 👏
Hi quick question I accidentally insert the pin to remove the sim tray into the little hole next it, could it have damages to it?
6:42 - don't worry
Muchas gracias por la revisión. Tengo el S22 Ultra y me encanta que también sea reparable. No acepto dispositivos no reparables.
👍
I want to ask you a question, since Samsung ditched the 3D ToF sensor for the rear camera, the question is how important is the 3D ToF sensor for photographic results?
And is it a good idea for Samsung to ditch that sensor?, Even though the iPhone has a lidar sensor, but I'm happy because there is still a microphone beside the rear camera.
Today the 3D ToF sensor has no sense at all, because basically it's just a very low quality camera (2 mpix or even less). We already have another much much better cameras on the back of the phone: the ultrawide and telephoto, that will help the main sensor even better than very cheap sensor dedicated only for this. Lidar is another story, it's just faster than using other cameras to calculate the distance, that's why it's still on the back of the iPhone.
TLDR: there are better options and ToF sensor are typical for cheap phones just to bump up the numer of camera modules to appear to be more premium.
@@jamrug3472 A ToF sensor is not just a small camera. It's a laser emitter and sensor, so basically a very limited lidar.
Thanks, bro, my worry about the mic and sim ejection hole has gone. great work.
You're welcome 👍
This green colour is hot 🔥
Yeah its a nice color
It's not hot 😑, it's nice
Another EXPENSIVE cost for a disassembly video. Thanks for the sacrifice and sharing a knowledge ❤
You're welcome 😃
I've also noted that there are no coaxial cables in the S22 and s22+😁
Yup, love that.
coaxial cables are now replacing flat cables.
is there a vapour chamber in the s22 and s22+?
S22+ yes but not the S22
This video was very interesting, thanks for posting
You're welcome :)
I want more details about S22 Ultra vibration motor!
Same as the S22 and the +. Video will be coming soon for the ultra.
Is that why there's a weird oval divot on the side rail of the phone, for the 5g antenna? I kept pushing it thinking it would pop out some kind of tray 😂 - usually they're just lines on the side rails.
your videos are like a biology teacher disecting a frog. just less disgusting, and more fascinating
haha thanks :)
@@PBKreviews 👍
Wow, didn’t know there was a mic at the back using the flash cut out to receive sound
Yup, they have been using this type of method for the back mic since last years model for the S series.
It might be for noise canceling
Hi one question, does it have only 1 liquid damage indicator beneath SIM tray or is there another in the top of the device?
from the looks of it, that's the only one I can see.
You are only one to do this ✌️✌️
Thanks! :)
Weird how Samsung only marketed the vapor chamber cooling system for the S22U when the S22+ uses it too.
Do you know what cooling system the 3 S21 models last year used?
Great work sir.. one suggestion for you, instead of cutting the clips use fast farword that looks good atleast for me : )
Do you mean for the reassembly part?
@@PBKreviews all part sir : )
Hi man, thank you for this awesome video. May I know what you think about Samsung S22+ heat solution? I'm planning to buy this one but really worry about heat from Snap 8 gen 1. Thank you.
Thank you and you're welcome. I can't say it has the best heat solution, but it did well during stress tests I initially ran on the benchmark video.
Nice video! But, Why in-display fingerprint sensor is different from s22 ultra ? In s22 ultra, the sensor is much bigger. I think samsung uses first gen sensor in s22 plus, am I right ?
Thanks. Yeah not sure why they went with a smaller one on this device.
6:23 you mentioned that the s22 uses a different cooling element than the plus. This would mean the 22 will run cooler than the plus?
No bro
Definitely not
Would love to see a drop test for the S22!
will be doing one for the ultra, not sure about the S22 I would need to find another one that I haven't taken apart or tampered with.
@@PBKreviews why not use the S22 from the teardown video? Does opening it up compromise the structural integrity
Thank you for this. Not sure how hard it's going to be for a newbie but I'm thinking of replacing charging port/simtray. My sim card won't work and I can't afford another phone since I'm still paying this one off.
Any good links for a replacement?
You're welcome. Shouldn't be too difficult. Just follow the video and skip any steps you don't need to do (like removing the motherboard). Here is a link for the replacement parts, scroll down you will see the sub board/charger port boards. Just make sure to order the correct one for your model phone. Since different model number/region versions will have different antenna contacts. www.mobilesentrix.com/replacement-parts/samsung/galaxy-s-series/galaxy-s22-plus
Hai, im just curious... if i accidentally poked up the microphone hole using sim ejector pin, what and where's the sim ejector pin actually hit up? Since the microphone and the gasket is actually located above the hole? Thanks in advance for your answers!
It would just hit the back wall of the L-shaped tunnel up to the mic.
This helped alot! thank you.
You're welcome!
Does anybody know where to find a replacement screen for the new Samsung models? Preferably the S22+. Is it too early? Does Samsung offer to sell parts?
One question for what market are this s22 phones are they with snapdragon or exynos 2200 procesor , btw great job cant wait for tab s8 teardowns.
Do you have a guide were you rate the best rated repairable phones? That would awesome.
one of the best video ...which?.this..PBK,,
Thanks! :)
good video its interior is different, and its speaker is very good 💯👍🏻
Thanks!
@@PBKreviews forever
Hi guys. What's up?
From what I understood in this video, there's a third mic, close to the flash LED. What's the purpose of that? Googled it, but haven't found an answer. Thanks and, btw, great job!
I dropped my Galaxy s 22 on the street. It fell off my truck bumper. I found it damaged. It had a case protector like a booklet. But it was still damaged. Is there any way to retrieve the pictures? Can it be taken apart and transplanted into another s22. So I can get the pictures? Please, I need your help
So I have the s22+ and with a lens protector on it makes the speakers crackle when the temp changes. So I took off the protector and it's fine now. Some say that the bottom lens let's air escape. My question is how.
Excellent demo.
Thanks
Looks like Samsung done a great job on the build quality of the galaxy s22 + 👍👍
👍
Hi, I have an S22 Plus, is it normal that at medium brightness (20/40%), with gray backgrounds, I can see the halo of the proximity sensor even when not in use? I have two circles right next to that proximity sensor. Let's say that you only notice if you are in low light conditions and only with dark colors such as grays.
The same thing happens in mine I went to the store to see the others and I think they are all like that depending on the color it shows or not :/
great video bro. i am in search of a galaxy s22 plus screen as well but the only ones i keep finding have the letter "E" in the top right corner. the one in your video and mine are the same with the letter "N"in the top right next to the tiny barcode. can you tell me where i can buy one ?
Hi, not sure which E or N you are referring to, I cant find it. But I don't think that would make any difference. The screens should be universal.
@@PBKreviews hey i tried 2 screens yesterday but neither worked. i am sending you a photo on my girlfriends instagram
Sir which os u love android or iOS which is favorite brand in android and has great durability like pixel or Samsung not Chinese brand
I am looking for the flex cable that goes to the 5g antenna same side as the volume keys and nobody seems to have it can you point me in a direction of getting 1 ? the part number is DP2515BH + also what is written on the cable is SM-906U MMV V REVD.7 Please and thank you
Thanks for s22 plus teardown
Next is s22 ultra teardown
Coming soon
You're welcome, and yup coming soon! :)
Going through where the flex is with a plastic pick is never a good idea. but great video detaling the how the phone is built.
Yep, need to be more careful on working screens but some of these have such strong adhesive so most other tools are hard to use to pry it off. But if the screen was broken, then would have been much easier to just rip it off with other tools :)
Does all galaxy s22 series have the same cooling system?
Ac
Only the S22+ i believe
S22 plus and ultra have vapor cooling on board not standard s22.
S22 has 3D graphite layers, and the + and ultra have vapor chambers.
Very nice video 👍
Thank you! :)
Now finish it off with the Ultra?
Yup, uploading the durability later today probably, and the teardown to follow.
VC??? NICE VIDEO!! THANKS!!
Thank you. Yup, not the biggest one but better than nothing :)
Is it true that s22 ultra have special thermal pasting that s22 plus doesn’t have?
Does s22 plus have vapour cooling chamber like s22 ultra?
it has a vapor chamber but not as large as the one in the S22 ultra.
Amazing video ☺️☺️
Thanks!
Hi. This is the best dissasembly video from s22 series. I accidently poke with sim ejektor the hole that is in the top of the phone s22 plus. Can u tell me if there is no option for me to poke waterproofing and mic damage with. I was so exited with new phone i poke the hole on top where there even isnt location of the sim card slot. Thank u for the answer??
How about my question above, when it comes to puncuring sim ejector tool in ABOVE mic hole - on top of the phone ???
For how many minutes do I have to apply heat to the back cover of my phone?
Just use a hair dryer and evenly apply heat so its hot to the touch. You don't need to do it for too long, since you can always apply more heat while your working you're way prying the back off. You can also use a suction cup tool to help you lift up on one corner or side to get a pry tool in.
I inserted the sim pin tool into the top microphone. Have I damaged my phone?
6:42 - you have not
훌륭하고 값진 영상!
Thanks!
Hi there, can Galaxy s21+ battery fit to the Galaxy S22+ ?
Why you gave 2/2 points to screen replacement if you damaged it?
well people replacing a screen are not replacing a working screen, I gave the score based on the ease of doing a replacement screen repair. Since you can just pry the screen off from the front without having to take the rest of the phone apart, it saves time and is easier to do. Also a broken screen you don't care about damaging it more so you don't really need to be careful with it and can just pry the thing off even if it breaks or damages more etc. Hope this explains it.
*then we're gonna use a pic... pry tool 😅
pic, pry pick, pry tool plastic triangle whatever works :)
@@PBKreviews guitar pick 😉
Also the first one to do it 👍👍👍👍
Would also love to see a teardown of the new Galaxy Tabs.... Drop a like for this comment if you would like him to do one.. 👍
Will try to do one if I can :)
If I remove the sticker on the back case of my phone, does it become a transparent back case?
Yes, but it might be a frosted glass due to the matte texture so it will be semi transparent if I'm not mistaken.
Which one has better speakers s22 or s22+
pretty much the same thing speaker wise.
see that apple, samsung didn't even need a notch to put the proximity sensor, they just put it underneath the display
when I put it back together again leave it as it was mobile the camera stopped working it says camera failed
I just had to reboot it to safe mode and then start it normally, but it is strange that it was not fixed with hard reset and with safe mode if it was fixed, it is surprising.
yeah that's odd
You're the best 👍🏻
Thanks!
Awesome Working...
I'd gladly take that S22+ with a broken screen for myself 🤭
👍😀
Can you get the Tab S8 Ultra to make a video?
Thanks!
I will try
뭐야 S22+ 베이퍼챔버 넣어줬었군요
S22와 S22+ 서로간 발열차이 여기서 발생한건가 싶네요
In the battery, they mentioned only 4370mAh, then how come they advertised as 4500 mAh?
4500 only in perfect condition such on lab
There is rated and typical capacity written on battery.
Thank you for such a detailed video, which is better for gaming, when it comes to heat solution. s22 or s22 plus?🤔
Would be the plus, because of the Vapour chamber. No vapour chamber cooling in S22.
You're welcome. Yes as the other comment mentions, the S22 plus would be better since it has the additional vapor chamber.
Hi Sir, how to replace front camera ?
after you take apart the phone and have access to it, it has some glue around the camera holding it in place. You would need to use a sharp razor blade or knife to cut the glue and pull out the camera.
I used a plate that heated the entire chassis to 70°C and removed the camera without problems.@@PBKreviews
nice, yeah that can work as well :)
Who is watching this video after pushing the sim injection pin in the microphone to see if it was damaged? 🤣
Btw, huge thanks for explaining this as I was worried, now I can sleep in peace 😁
haha, you're welcome :)
Can s21fe & s22+ battery be replaced on each other?
I'm not sure, there is a chance the connectors won't be exactly the same so it wont connect to the board.
ow thanks please s22 battery drain test
I will look into it depending on how much time I have, still working on a bunch of videos. :)
i could not identify the haptics motor on either the S22 and S22+.
Its in the speaker assembly and its sealed. I didn't want to break the speaker assembly to show it.
LETS GIVE IT A GO..........for the ones that know 👍
Why on many chip parts are felt-tip pen writing
probably just quality control at the factory when they inspect certain stuff before clearing it for installation or use.
Any 5g antennas in this?
Yes he literally says it has 2 5g antennas in the galaxy s22 plus An Literally points at them.... Are you blind are deaf buddy?
It looks like the charger port itself is sawdered onto the bottom board. Sorry if I did not sleep it correctly.
Yup it's soldered onto the sub board but the sub board is replaceable so there should be no problems. As long as its not soldered onto the main motherboard since they don't sell replacement motherboards. :)