Boss VE-22 Vocal Effect pedal and loop station Tutorial
Вставка
- Опубліковано 16 чер 2024
- elijahmc.co.uk/boss-ve-22-voc...
0:00 - Intro
0:09 - Basic Overview
0:31 - Memory Mode
0:49 - Loop Station / Loop Mode
1:53 - Effects while in loop mode
2:40 - Basic Effects Operations
3:24 - Editing Harmony Effect and Echo
5:03 - Effects Available
8:10 - Echo Options
9:39 - Writing/Saving your entire patch
12:05 - back of the unit
The BOSS VE-22 Vocal Performer is a multi effects pedal for vocal performers. It also has a built in ‘loop’ mode. In this article we’ll walk through all the functions and features to get the most out of your vocal performance.
LOOP MODE
First is the loop function. You can access the loop mode using the centre and right pedal pressed and held together. This will set the unit into memory mode. Then press the centre pedal while in memory mode. This will activate loop mode.
If you have entered loop mode correctly. The right pedal should flash white. It’s this right pedal that operates every loop function within loop mode. This is used to start and stop recordings, Overdub recording and stop and start playback. Holding this pedal down for 2 seconds will clear all recordings and reset the loop mode.
Vocal Effects
If you are in memory mode, hold the centre and right pedal to return to standard mode. If you have just turned on the pedal, it will open in standard mode already.
The three pedals correspond with the 3 effect knobs. Harmony, Effects and Echo. They serve to activate and de-activate each of these effects.
You can edit and manipulate the way the effects behave. Entering the menu of the effect you wish to change by double pressing the effect knob you wish you edit. Each effect has its own set of editable parameters.
I just got mine -- My experience
1. Usb connector only allows music to pass through as background (documented) - WIndows Driver needs to be downloaded.
2. The Usb connector does not have a mode to allow you to save user presets
3. The key of the harmony cannot be globally set to FIX.. everytime you turn the preset, the key defaults back to C
4. Interesting - Autotune which is present as a default on most other brands is not present here,, have to figure out using the presets and save to User Memory
So therefore the set lacks the ability to upload or save user presets and thus the internet community cannot share presets unlike the TC-Helicon products.
I hope this can be accomodated later with a firmware upgrade
Thank you! Best and most comprehensive Video about the V-22 out there 😁 Are you aware if I could use the usb-C to connect the pedal on an android phone/tablet/PC as an external mic? Thanks again for the great video brother 🙏
Oh, good question. Ill have a play around with input options. I suspect not as a mic. But thats soeculation. Will find out tho.
thanks!!!
I dont own one of these but i'm very impressed with your video..Good job!
It looks like it would be more convenient mounted on a 'Mike stand shelf' and operated by hand.... Has anyone bought one? , what are your likes /dislikes..? Thanks.
Great suggestion!
My personal likes are the ease of use and its simplicity.
Dislikes are the limited loop use as im used to having more channels/control options. But that can be worked around with extra pedals. Like the CTR1 and expression pedal additions.
Its not a loop station in that sense. Its main function is for vocal effects. Which it does beautifully.
Does the delay has a tap tempo function?
If it has, its not obvious
Hello! I connected the ve-22 to the PC after downloading the drivers and installing them, the word updater appeared on the screen and the harmony button flashes blue, is this correct? If I try to start the application on the PC it tells me it can't find the device, can you help me?
If you can check you have the correct driver download. Then check the settings on thw device to make sure its on and if any settings are needed. Thats where i would check.