Honda service manual for this engine says never to screw the dipstick in to check the oil level on these engines, you must only insert the dipstick to the start of the threads and remove it to check the oil level. If you screw it in you will be always running the engine approximately .2 or two tenths of a quart low and full oil from empty on an oil change only needs 1.2 quarts according to the sevice manual. On my Reflex NSS250 (same engine) I have found it much easier to get the drain plug threads to align better and quicker by for one thing using a 6 point socket and not a 12 point when reassembling and use a long extension in the socket when starting, by hand, to rethread the drain plug. I found it much easier to control the drain plug angle when fighting the spring tension with this method. I fought with trying to do it with my fingers also when I first bought the bike and it is just more of a pain to do it like that. Also with the socket and extension there is much less chance of crossing the threads.😁
![Honda PS250 Big Ruckus [Обзор внедорожного максискутера]](http://i.ytimg.com/vi/Lo7wJgA8mgI/mqdefault.jpg)
![Honda PS250 Big Ruckus [Обзор внедорожного максискутера]](/img/tr.png)
Honda service manual for this engine says never to screw the dipstick in to check the oil level on these engines, you must only insert the dipstick to the start of the threads and remove it to check the oil level. If you screw it in you will be always running the engine approximately .2 or two tenths of a quart low and full oil from empty on an oil change only needs 1.2 quarts according to the sevice manual. On my Reflex NSS250 (same engine) I have found it much easier to get the drain plug threads to align better and quicker by for one thing using a 6 point socket and not a 12 point when reassembling and use a long extension in the socket when starting, by hand, to rethread the drain plug. I found it much easier to control the drain plug angle when fighting the spring tension with this method. I fought with trying to do it with my fingers also when I first bought the bike and it is just more of a pain to do it like that. Also with the socket and extension there is much less chance of crossing the threads.😁
Thank you, that was excellent ,
Thank you that was excellent.
Thank you for your kind words
Do you happen to know where I can find a wiring diagram for my 2005-06 Honda big Ruckus 250 CC