bhaiya can you make a easy diy new steering wheel at some cheap price without ardiuno a fbb system with some othe thing rather than electric components please
cool build, good inspiration for own. Think I'll try the side plates in steel though, I'm worried the wood will eventually get carved away by the ball bearing - especially if using stronger springs. Have you been using it for a while?
Bro in past few weeks i made a shifter that can convert to type H to sequential easily... Only i have to apply two screws to make it sequential from type H
Hey bro, These days I'm trying to make your diy ffb steering wheel I collected money like 11k in LKR could you please mention total cost of your ffb wheel and pedal set. I only need wheel pedal shifter and pedals only.
Steering wheel parts- Arduino Leonardo (from Pettah) - Rs.2650 BTS7960 - Rs.1450 775 motor - Rs.1960 60T-8mm + 20T-5mm pulley + 200mm belt - Rs.1800 600ppr Encoder (from AliExpress) - Rs.2500 (+Shipping) pillow bearing x2 - Rs.740 L motor bracket - Rs.500 Lencoder bracket - Rs.500 Cpu fan (from Pettah) - Rs.400 jump wire male to female (40pice) - Rs.180 PCB dot board - Rs.100 Ik resistor x2 - Rs.6 Total - Rs12786 I didn't remember the price of the pedals, and I didn't buy the woods or slotted angle bars because I already had them. I only paid for potentiometers and pedal covers. but I think it can be done under Rs 16000 (complete setup)
Watching from Brazil. I really like your projects
❤️❤️
Fantastic use of the tools you have available! Loved the ingenuity!
Thank you very much!
@zudumalli does the wheel support 1080 degrees turning.
thanks bro. iam from india love you bro
Sir, in the video "how to make padels" where we can find the spring?(which was be put in the pvc tube)
great tutorial
Thanks!❤️❤️
bhaiya can you make a easy diy new steering wheel at some cheap price without ardiuno a fbb system with some othe thing rather than electric components please
cool build, good inspiration for own. Think I'll try the side plates in steel though, I'm worried the wood will eventually get carved away by the ball bearing - especially if using stronger springs. Have you been using it for a while?
Yes, I have used this same method for the h-shifter as well. There is no problem with that.
Can I use the UNO R3 CH340G + MEGA328P SMD Chip (16MHz) for a steering wheel project with 3 simple potentiometers?
Nice shifter man ❤ BTW which software are you going to use ? EMC or RFR ?
emc❤️❤️
@@zudumalli Is emc superior to rfr.
❤ gracias
Hey bro can you give me links for buying spring pls
In my town area there is no shop for spring
search it on eBay or Aliexpress. The pdf link has all the information on the spring.
@@zudumalli thanks😇
Bro in past few weeks i made a shifter that can convert to type H to sequential easily... Only i have to apply two screws to make it sequential from type H
Bro what is the cpr value of ky04 rotary encoder
Great job again ! Do you plan to test EMC utility pro ?
Yes
කරන වැඩේ කොලිටියටම කරනවා ❤️
❤️❤️
ඒක wiring කරන වීඩියෝ එකක් දාන්න පුලුවන්ද?
Hey bro, Does FFB work with an optical printer encoder? and another question, is 100ppr enough for a FFB steering wheel?? pleas answer me. Thanks!
yes, you can.
100ppr working well but increasing the ppr value wheel becomes more smoother.
@@zudumalli thank you so much ❤️
Hey bro,
These days I'm trying to make your diy ffb steering wheel I collected money like 11k in LKR could you please mention total cost of your ffb wheel and pedal set.
I only need wheel pedal shifter and pedals only.
Steering wheel parts-
Arduino Leonardo (from Pettah) - Rs.2650
BTS7960 - Rs.1450
775 motor - Rs.1960
60T-8mm + 20T-5mm pulley + 200mm belt - Rs.1800
600ppr Encoder (from AliExpress) - Rs.2500 (+Shipping)
pillow bearing x2 - Rs.740
L motor bracket - Rs.500
Lencoder bracket - Rs.500
Cpu fan (from Pettah) - Rs.400
jump wire male to female (40pice) - Rs.180
PCB dot board - Rs.100
Ik resistor x2 - Rs.6
Total - Rs12786
I didn't remember the price of the pedals, and I didn't buy the woods or slotted angle bars because I already had them. I only paid for potentiometers and pedal covers. but I think it can be done under Rs 16000 (complete setup)
@@zudumalli thank you bro i think i have to collect more or start without ffb and add it later. What will you recommend to do.
Arduino not connected with pc
.hex file not uploade
X loader say (upload failed) why
check your USB cable
want to see it in action
❤❤❤❤❤
bro why not sell this? for like 5k pesos (idk how much in your currency) you will get rich! (also pls try emc pro version)
❤️❤️
@@zudumalli yo bro, what do you preffer for ffb settings emc, or wheel config
Can I use the UNO R3 CH340G + MEGA328P SMD Chip (16MHz) for a steering wheel project with 3 simple potentiometers?