Current build for me is a Ripp Coils with new ngk spark plugs, Mopar cold air intake, borla catback exhaust, mmx ported 80mm throttle body, ripp oil catch can, ripp 180 degree thermostat, powerstop z23 Slotted disc brakes and unlock pcm from hp tuners. sorry no rt differential had to check again but its 3.07 so its standard going to upgrade that next. Glad you're doing your build, also too much hate for the v6. Updated parts: just installed the MMX ported intake manifold, upper and lower. Got also toyos speed rated tires, I'm getting a tune this Friday. Will post the results video on my YT channel and on Instagram.
Regarding the Oil Cooler housing, Dorman makes an Aluminum Housing (part 926-959) for 1st and 2nd Gen Pentastar Engines. However, you will need to use 2014 and later oil filters in future oil changes.
@@SUPRAMIKE18 you were talking about modifications for a three. Six that isn’t even truly supercharged and that the time of the video wasn’t even your fucking daily driver dog but I have a 300 I love her hydrant I thought I was gonna check this video out and get some good information and all it looks like is that you’re trying to give you use and no offense but how the hell you gonna do a video modifications with your car isn’t even running
The best mod for the 3.6L V-6. Is go too a SRT 3.92 rear gears. I dropped from 6.34 sec's 0-60 mph. Too 5.75 Secs' 0-60 mph. Changing from the factory 2.62 gears. In my old 2012 SXT Plus Challenger.
Btw I don’t care bout the back and forth brodie but yeah magnaflow exhaust or most aftermarket performance exhaust system will add more horsepower because the exhaust gases flows out fast. Even when you straight pipe it acts the same way
Aye bro if u care about suggestions go head and try to get performance headers, E85 adapter, cat back exhaust and a tune. I got more suggestions if u need
I have a 2021 300 with the 3.6 Pentastar and I love it BUT, I’m here to tell you that no matter what there’s no replacement for displacement unless maybe you blow the engine or ad a turbo then you got a fighting chance.
trop vrai moi jai 2019 300s pi j'ai pas ma l fait se que tout le monde fait CAI spectre bougie iradium et ripp bobine can cash oil et hypertech pedal reaction et je suis passe de 0 a 100km de 7.8 a 6.9 et regulier 7.1 donc je sais pas comment vous faite pour arrive a 6.1 et 5.9 !!!!!!
I tried to watch the whole clip, Maing. Started feeling epileptic about halfway through. Maybe hold the camera still long enough to focus, move slower, sumthin. I tried again, same thing.
I found a chrysler 300 srt8 . Crashed at the tow yard. Front end damage but the engine is good it cranks . The yard want 2500 just waiting on the papers . I'm getting that shit
The RIPP super charger coil packs Whats their purpose and did you install them yourself and if so was it difficult and do you have mechanic backgrounds
They spark 10% hotter than OEM Coils. The product does produce gains in HP, acceleration and MPG. 10 to 20hp gain, 2 to 5 mpg gains and little more torque for accelerating when barely touching the gas. Good product like many others but I'm using Ripps products in my build because they work well with the V6. The only thing that was difficult was taking off the manifold to have access to the coils and plugs because the mounting brackets are almost hidden from site but reachable. It took me my on First attempt an hour to get off. Not too hard. Hope this helps 🙏
@Aeroswrld24 don't you mean that they have a cooler rating bc you said they spark hotter bro that doesn't make sense. Cooler spark heat rating means better performance for the plugs
Yours come with 292 stock!? Mines a 5.7 and it came 298whp stock and tuned I my made 302whp. Now I got a flex fuel kit and long tube headers now I need a re tune for both and I’m hoping to make around 350whp lol
@@BudgetZay who’s talking about a 300s 5.7 ? 😂 the guy in the video has a v6 goofy ass , he said he made 292 stock on a V6. Also that’s to the crank bud not to the wheel 😂 learn a little more yeah?
Late to this video but that’s funny I have a 2019 3.6 Chrysler 300 as well I have the same mirror guards too lol I did the flow master underneath and the K&n cold air intake I need to do the rest you did
The throttle body spacer is placed between the throttle body, which controls airflow into the engine, and the intake plenum. This increases the volume of the space between the intake runners and the throttle body, which gives more air to the engine.
You should be confused. You got a shitty Monte Carlo as your profile photo but trying to tell me how performance works on a Mopar. Find some business this is not the page for you Sherlock
Ok I gotcha & I wanted to ask about your exhaust what all did you do did you just change the mid muffler to magnaflow or you did more . Your video the only one I like the sound on trying to get it done
Formula too complicated, but somewhere inthe area of 2 horsepower gain for every 1/2 pound of carbonfiber. (But it will call you a cab to get you home)
Current build for me is a Ripp Coils with new ngk spark plugs, Mopar cold air intake, borla catback exhaust, mmx ported 80mm throttle body, ripp oil catch can, ripp 180 degree thermostat, powerstop z23 Slotted disc brakes and unlock pcm from hp tuners. sorry no rt differential had to check again but its 3.07 so its standard going to upgrade that next. Glad you're doing your build, also too much hate for the v6.
Updated parts: just installed the MMX ported intake manifold, upper and lower. Got also toyos speed rated tires, I'm getting a tune this Friday. Will post the results video on my YT channel and on Instagram.
You put alot into that. You have any videos posted?
Not yet just been busy at work. Just learning as I go and I'll be posting more videos soon.
Majority of The R/Ts come with 3.07 rear diff gears.. so you basically do have A R/T diff in youre v6!! Is you’re car AWD or RWD?
Are Ripp coils worth it ? I thought of getting some for my 300.
How much hp you got when you dyno ?
Regarding the Oil Cooler housing, Dorman makes an Aluminum Housing (part 926-959) for 1st and 2nd Gen Pentastar Engines. However, you will need to use 2014 and later oil filters in future oil changes.
Gotta love the 300 💯💯💯💯Let’s go !!!!
This is up my alley!! Had to see what you did to it with that title.
Love the build, always appreciate an underdog 6cyl! Ignore the haters!
Man if you don’t take this down lol smh
@@jayjackson-mq7yu nah don't think I will. Have a nice day ☺️
@@SUPRAMIKE18 you were talking about modifications for a three. Six that isn’t even truly supercharged and that the time of the video wasn’t even your fucking daily driver dog but I have a 300 I love her hydrant I thought I was gonna check this video out and get some good information and all it looks like is that you’re trying to give you use and no offense but how the hell you gonna do a video modifications with your car isn’t even running
@@SUPRAMIKE18 the V8 is an 8 speed is the car running now and what year is this
@@jayjackson-mq7yu wtf are you on about?! This isn't even my car I was just commenting on the video lmao 🤣
The best mod for the 3.6L V-6. Is go too a SRT 3.92 rear gears. I dropped from 6.34 sec's 0-60 mph. Too 5.75 Secs' 0-60 mph. Changing from the factory 2.62 gears. In my old 2012 SXT Plus Challenger.
What else you needa do to change the gears? I got a 2019 Chrysler
@@elkilo3008 I took mine to local Performance shop. And had them do it for me.
Oh ok cuz a lot of people tell me i need 230mm axles off a hellcat to install the 3.90 ls differential
@@kevinvojta692 I have a 06 300C and want to get 3.92 gears. How much did you pay if you don’t mind me asking?
@@ethanjohnson9286 This was back in 2013. I think i paid. With install around $900.00 or so.
Btw I don’t care bout the back and forth brodie but yeah magnaflow exhaust or most aftermarket performance exhaust system will add more horsepower because the exhaust gases flows out fast. Even when you straight pipe it acts the same way
Aye bro if u care about suggestions go head and try to get performance headers, E85 adapter, cat back exhaust and a tune. I got more suggestions if u need
Appreciate it🙏🏾. I have a ton of mods on the way, this thing is going to run crazy when im finished
You can tell you take really good care of that car.judgeing by what i see!
Absolutely.
I brought my first Chrysler Sports Car somewhere around 21 years old while working for DLA. It was an awesome car until a bad car accident occurred.
Sorry to hear that. 300s are amazing vehicles
How you holding up
@@vote4thavillain5.76 I actually haven't been feeling well. Thanks for asking.
@@caenterprisellc6922 you in my prayers young lady
Dope..what did you have?
“The intake is already tuned” Blud is clueless on how tuning works
Damn you make me dizzy with that camera
Yup, me too! Couldn't watch the whole thing.
I have a 2021 300 with the 3.6 Pentastar and I love it BUT, I’m here to tell you that no matter what there’s no replacement for displacement unless maybe you blow the engine or ad a turbo then you got a fighting chance.
I'd go with that turbo tbh
trop vrai moi jai 2019 300s pi j'ai pas ma l fait se que tout le monde fait CAI spectre bougie iradium et ripp bobine can cash oil et hypertech pedal reaction et je suis passe de 0 a 100km de 7.8 a 6.9 et regulier 7.1 donc je sais pas comment vous faite pour arrive a 6.1 et 5.9 !!!!!!
I’m about to add all this shit to my v6 bro when I get bread ima save this bud fr!
300 Gang!! I got some MAJOR work coming to my 300. Will be stomping out V8’s
💪🏾💪🏾💪🏾
My boy had the peddle command on the scat
I tried to watch the whole clip, Maing. Started feeling epileptic about halfway through. Maybe hold the camera still long enough to focus, move slower, sumthin. I tried again, same thing.
Been following this Chrysler 300 sure would have liked to know the rest of the mods so I can finish mine 😩
I'll put a video up with all mods i added to the 300
Great job on your rebuild V6 Chrysler 300 just curious what was your cost for those particular Parts you put on it
Roughly around $800
800 for everything?the intake alone look like 800
Pink slips then?
Yeah wya
I just want that cd player for my 300
I found a chrysler 300 srt8 . Crashed at the tow yard. Front end damage but the engine is good it cranks . The yard want 2500 just waiting on the papers . I'm getting that shit
Nice
Ain’t gon lie I’m about to copy everything you just said and put that in my 2013 v6
You'll be surprised how much power those small mods give you
I have 2013 Chrysler van you tell me how to turn the sport mode on
@@CalleProd32how much did your 0-60 speed increase?????
You great job thank you
The RIPP super charger coil packs Whats their purpose and did you install them yourself and if so was it difficult and do you have mechanic backgrounds
They spark 10% hotter than OEM Coils. The product does produce gains in HP, acceleration and MPG. 10 to 20hp gain, 2 to 5 mpg gains and little more torque for accelerating when barely touching the gas.
Good product like many others but I'm using Ripps products in my build because they work well with the V6.
The only thing that was difficult was taking off the manifold to have access to the coils and plugs because the mounting brackets are almost hidden from site but reachable. It took me my on First attempt an hour to get off. Not too hard. Hope this helps 🙏
@Aeroswrld24 don't you mean that they have a cooler rating bc you said they spark hotter bro that doesn't make sense. Cooler spark heat rating means better performance for the plugs
Where the supercharger coil packs from
Hey man
I have 2013 Chrysler 300 and I don’tknow how to turn on sports mode so can you help me with it
If you don’t know how to turn on sport mode you have no business even turning it on
What site do u find supercharger coilpacks on I want same ones u got an rear window wing carbon fiber
Go to RIPP Superchargers website
You saying it’s faster then the 5.7 because of the 8 gear ratio ? Because ik the v6 has the 8speed if I’m correct
In my opinion the 8 speed keeps it up with the rt
Yes
Update on this bro??
Yours come with 292 stock!? Mines a 5.7 and it came 298whp stock and tuned I my made 302whp. Now I got a flex fuel kit and long tube headers now I need a re tune for both and I’m hoping to make around 350whp lol
5.7 300s come with 335hp stock what are you talking about 😂
@@BudgetZay who’s talking about a 300s 5.7 ? 😂 the guy in the video has a v6 goofy ass , he said he made 292 stock on a V6. Also that’s to the crank bud not to the wheel 😂 learn a little more yeah?
@@BudgetZay what are you talking about 😂
Late to this video but that’s funny I have a 2019 3.6 Chrysler 300 as well I have the same mirror guards too lol I did the flow master underneath and the K&n cold air intake I need to do the rest you did
No way that’s faster than a stock 300 SRT 5.7
2 inch spacers all round with shock kit
I did it TOUGH
Whats the purpose of a throttle body spacer???
The throttle body spacer is placed between the throttle body, which controls airflow into the engine, and the intake plenum. This increases the volume of the space between the intake runners and the throttle body, which gives more air to the engine.
Just cuz you upgraded your coil packs doesn’t mean it’s supercharged
Never said it was supercharged doedoe
And the setup to buy the stuff
How is fuel consumption?
Great surprisingly
Ayee u can send the link for intake
Yeah or just Google Injen Tuned Cold Air Intake
I have the same model how can I get it in sports mode ??
Tazer
How to make it faster.....Throw in a 6.1L engine.
Where did you get the intake
Amazon
unrelated but i owned 4 slant 6 darts. i couldn't kill them. they were great 1st time cars
You got any dyno vids
Not yet but ima sell this 300
#RespectThe6 #V6Mafia
What's the 0-60 fam
Normally I pull 5.6s but my last run i pulled a 5.4s
Without the 3.6 Pentastar there wouldn’t be hellcats…They exist because of the V6
Those are facts
Yeah my stock 5.7 would kill that lmao😭💯
My awd rt pursuit would kill that stock 5.7😊
@@CalleProd32 see how he aint reply XD NICE ASS CAR BRO
@@SRTBIGTRIPLEO thanks bro. He got quiet when he realized his stock 5.7 is all he have to gamble with😂
@@CalleProd32 most def xD
Imagine gettin btchd on youtube over a car 😂lmao
Can I do this to a 2007
That I'm not sure of but I don't see why you can't
I'm sure you can the car hasn't changed much
I'm sure you can the car hasn't changed much
My 3.5 could crawl past it
Stay off the drugs they making you sound special
That’s not supercharged 😂😂😂😂I can’t you’d know what it’s yours but 🤦♂️🤦♂️🤦♂️🤦♂️ 350hp no sir I’m so confused by you no disrespect.
You should be confused. You got a shitty Monte Carlo as your profile photo but trying to tell me how performance works on a Mopar. Find some business this is not the page for you Sherlock
@@CalleProd32facts these people that be commenting don’t even have a car
😂😂
CAP.
Yoo bruh .. I’m fucking with it I got a Chrysler 300 V6 myself trying to get mines right .. what’s your Instagram??
I'm working on a Instagram page now. I'll keep you updated bro💪🏾thanks
Ok I gotcha & I wanted to ask about your exhaust what all did you do did you just change the mid muffler to magnaflow or you did more . Your video the only one I like the sound on trying to get it done
@@6.2FLEX I swapped out the mid mufflers with magnaflows but that's coming off when my catbacks arrive
I’m about to add all this shit to my v6 bro when I get bread ima save this bud fr!
How much hp does the carbon fiber add?
Formula too complicated, but somewhere inthe area of 2 horsepower gain for every 1/2 pound of carbonfiber. (But it will call you a cab to get you home)
None