Will It Run? Lawn Mower Carb on V8! (The "IMPOSSIBLE" Becomes Reality!) Start to Finish
Вставка
- Опубліковано 31 лип 2024
- all someone had to tell me was that I couldn't do it.
Careful what you say to a self made engineer from the trailer park . . .
music: Skorned Psychosis - Авто та транспорт
Edit: I did actually end up manufacturing the carb cheater and am currently on order number 2,018 or so - seriously ...
Can be purchased here: carbcheater.myshopify.com/
to put a definitive end to all the "this or that wont work" comments - everything in one video that address all the arguments.
Am I promoting the idea of putting a mower carb on a vehicle? no - but dang what a fun science experiment!
Now the Carb Cheater has raised a lot of questions - if I did go through the effort to sell that tech as a kit, would there be any interest?
Would be a lot of work on my part.
You should totally make a kit or release the files, this could be a fun thing for others to do lol.
Tesla and all the inventors where in that position at some point!
Patent it!!!
Respect!
Thank you for the lack of 'skip ad' target practice.
A hooptie V8 getting the same mpg as my hybrid. And a Ford too. Respect.
Ford worked on a high mileage carb back during the "Pogue" carb days and got it to 250 mpg on a V-8
@@mikedonovan9573 all the OEMs have figured out how to make a high mpg engine, but greed and politics has kept it out of consumer hands. We don't need catalytic convertors and all the complexity. A clean burning, efficient engine lasts forever because if all the fuel is being utilized there is no carbon fouling.
@@hoost3056 lets hope someone gets into some form of government position that realizes this and takes down emissions stuff and catalytic converter requirements. then we can have high mile v8s. if that person happens to be u, u have my vote, guaranteed
@@hoost3056 this is true and I definitely support your thinking, the government had issues with clean burning engines because they burned hot enough to make NOx emmisions thus the colder burning, less gas efficient and dirtier cat required modern cars. I am willing to admit that I know nothing of the dangers of either as I am not an environmental expert and I personally don't care too much. (I'd love it if global warming made ohio like south Carolina and got rid of Cleveland and toledo in the process!) Just a fun fact I learned from a video on why hydrogen engines never took off, and why mid 90s hondas are so good om gas.
Your hybrid is doing it with at least 4x the horsepower though.
The first thought I had (aero-engineer) was the small carb was running a higher velocity at the same mass flow of air/fuel for the power the engine is making. That could create turbulence itself due to boundary layer effects. Your 90 degree turns also would be effective for mixing the fuel and air. I think your theory is correct on atomization of the fuel. Apparently you found a sweet spot in all of this and created something amazingly good at efficient operation. Nice job!
A tunnel ram enhances the mixing of air and fuel..a mower carb and bends chokes the engine, starves it of air..if it didn't he wouldn't need to create a vacuum leak.
Exactly his thoughts from the last video
@@brettjasonhead3740 he is running a "vacuum leak" via a app on his phone and a IAC valve.
@@jimbagle.3939 Yes, which means the mower carb is doing nothing more than driving with a choke on.
@@brettjasonhead3740 no man, it is more like the opposite of choke.
It's not less air volume than the carb at wide open. It's more air volume.
The "vacuum leak" is to regulate the flow rate of the fuel jet.
LOVED YOUR LAWNMOWER CARB ON V8 VIDEO !!
I've done a similar fuel conversion on a nice vintage 86 Chevy 4x4 van that came with a factory installed camping interior. I did the 4x4 conversion & engine swap a few years ago, my wife & I used this rig to tow our RV & assess the backcountry. It's running a 383 stroker, auto trans & a gear vender.
I purposely kept the running gear on the van old school with no computer as I'm somewhat electrically challenged.
I conducted several years of research prior to delving into these projects & to avoid melting down the newly built stroker motor. With a 4-barrel carb this rolling breadbox gets 10 mpg on a good day with a tailwind.
I first converted it first to run on hydrogen but output was not sufficient.
Note; Prior to experimentation & avoid engine meltdown issues I installed Manifold Temp. & Air/Fuel ratio gauges.
I ultimately converted the van to run very well on a gasoline vapor unit I designed that includes a float valve setup installed in bottom of the unit.. I'm currently running a chinese knock-off of 54 Chevy single barrel carb on the van. Bet a lawnmower carb like yours would work equally well if it was used in conjunction with a vacuum advance like you built.
Most don't realize that Henry Ford patented a working gasoline/kerosene vapor unit back in the teens. I was fortunate to observe one of Ford's factory units work on a local truck & was provided with the plans.
Only issue is that gasoline vapor freezes same as propane, I believe the solution is to introduce more exhaust heat from the manifold but got stopped a couple years ago due to health issues.
My goal was to try & exceed 100 mpg running vapor & distribute plans for free to those interested.
This goal would not likely be well received by our taxation & energy moguls.🤣
*The vacuum tuning unit you built is very ingenious, wish you were closer to Idaho to consult & incorporate on my project.
I'm now 81 with health issues so unfortunately the van may end up with another like minded mad scientist.
I would welcome your input.
Chuck T.
Kuna, Idaho
Chuck if you are still sharing the plans, id love to have scans and be able to pass them around. Your ingenuity is amazing
Chuck it's a small world, I used to live in Kuna
Are you still with us Chuck??
@@tims7219 Apologies' for the late reply Tim.
My vapor setup works very well on my 383 stroker & produces excellent EGT & air/fuel ratio results on the gages. Only issue is the vapor freezes up under higher rpms.
I introduced some heat via copper tubing to the exhaust manifold but was not enough to resolve the freezing. Unfortunately age '82' & health has put a halt to completion so will be selling the 4x4 van. Hopefully find a new owner who will add enough additional manifold/exhaust heat to perfect the operation.
Chuck, if you don’t mind could you send me your current design and the information you have gathered? I’m very interested in your ideas. Also, could you provide some more information on the Ford patent? I’m curious to look into that as well. Thanks.
Too cool. I remember a guy in the 70s, during the gas crisis then, being able to get 28 mpg with a V8. It's rather disappointing that my current truck only gets 14 mpg. I know the manufacturers can do better. You did it in your garage! You are amazing. Thank you for the great video.
I say sell it as a product,
There’s a market for it, especially in nowadays fuel prices reaching a higher price every day. Why not? Make 30 units, sell them for a fair price that you and the customer walk away happy, maybe apply for a patent? I say why not? It’s an extra stream of revenue to secure a brighter future! You sir, are American ingenuity at its finest!
Of course it's crossed his mind. I commented on this in the previous upload.
A patent only gives you option to sue an infringer at your own expense. Unless backed by a major commercial company you will not be able to afford that. Process totally skewed against small individuals. Better to just be known as the main guy in the field, the original inventor (something YT nowadays allows you to do, as you are doing right now) and just be the first, the best and most well-known.
Big oil will never let it hit the streets...period
@@XenonJohnD This isn't even a new concept, nor new stuff, just a 3D printed adapter anyone can make... try to sue that and you'll be the morning news laugh of the day...
I'll buy one
First of all... I am not a mechanic or a tinkerer even close to anything to your level. I'm just a necessity fixer, cause I grew up poor and things need to run. However, what you're doing I wouldnt' call impossible becoming reality. What you're doing is the most, real to life, hot rodder thing ever... but in reverse. Unlike all the 70's and 80's EPA shit... you're accomplishing some of it while keeping the sound of the car, the fun of the car, and useability of the car at a maximum considering. You're true to spirit it seems. Good job my dude, great work
This is honestly mind-blowing. 😮 you need to start mass producing that tuner you made 🎉 congratulations on this project! Amazing work
I'm 74 yrs old and you just blew me away ! Had visions of the Pogue Carburettor and the Long Range Desert Group right off the bat. Not just well...but extremely well done sir ! The World needs more people like you !
Once I owned a Honda CRX around 1985 or six It got about 35 to 45 per gallon. Such a great car and pretty fast.
You the man brother I'm 58 I've been working on cars all my life and I'll tell you what I never thought of that but I seen Ian Russell build a 3-wheeler chopper with Honda 6 cylinder engine and he put a regular I think I'm Otis a little carburetor something like that on there and made his own intakes all intake tubes into one little car and man that thing was beautiful ran perfect so you know I can see the way you put it out there on your board and that thing you made it kind of makes all sense I mean wow but like that other guy said boys going to be after you or want you to take it off look at that guy who made an engine that ran on water he disappears and sold it all the plans so fat back and bacon grease buddy you the man piece
Well we also need people to be really rude to him too. That was a big factor.
@@WilliamNordeste I also had a CRX 87' and my dad moved the cam forward one tooth and it went from 48mpg to 52mpg and pulled so hard it would torque steer! Ahhh I should have never sold it.
if we didnt the invention secrecy act the pogue carburetor would have been reality and many other similar inventions
That carb cheater of yours is great. I'm not surprised at all that the thing ran on a mower carb because I've messed with them enough, but that cheater of yours really puts the whole thing together.
I'm really impressed with your understanding of electronics, software, and mechanics. Pretty uncommon to find someone who's as capable with a keyboard as they are with a screwdriver.
I really need to get my feet wet with the 3d printing and app stuff, would really open up some doors for me on my hobbies.
Do it. Just buy one. Dont over think it. Get one in your hands and start messing around
I Believe in you. That you can and Will , believe in you too; you willing.. an able ready freed will ling. Sorta typa Human thing
@@CoincidenceTheorist I will when the time is right. Life's a bit busy right now so I'm holding off on buying a 3d printer. When I finally have time to mess with a 3D printer, there will be newer/better offerings on the market.
I've got a spare one if you still haven't gotten one
@Steven Reese I got an Anycubic Kobra Plus in the new year. It has been a hassle free printer so far short of having to input custom printer parameters into the slicing software.
It doesn't matter where you are from or even, where you are right now, what matters is where you are headed! Good job, sir!
That was awesome. Never underestimate the mind of a car geek/engineer
Well done.
I loved the comment about "over carbing" your engine. I had a 1985 F250 with a 351M. I thought I was hot sh1t as a teenager and slapped a 750 holley on top thinking I was going to get awesome power. I never did get it tuned right. I even switched brands to an Edlebrock 750. The thing still always ran like crap. A guy I worked with, built and raced drag cars and stock cars and informed me my carb was way too much for the truck. he took a 600 edelbrock right out of the box, slapped it on and the thing ran like a raped ape. in a half hour my guy took everything I thought I knew and tossed it right out the window 😂
@My Pronoun is WTF yes each engine i can be wildly different. The reason the 351 Modified didn't do well with a big carb is because of the cam. It was designed for a lot of low rpm torque, which made it a poor candidate for a big cfm carb. Basically it wasn't capable of using all the air available with the 750 and all the drivablity went away. To note, I also had a 302, that ran great with a 750. But it wasn't stock like the 351m.
@My Pronoun is WTF that’s because a 440 is massive
That happens sometimes
"he took a 600 edelbrock right out of the box , slapped it on and the thing ran like a raped ape " 😭😭😭 I'm dying here my man , what a legendary saying I love it bawhahahaha brilliant 💪😜😂😭
I don't really care for the edelbrock carbs too much... They work good and all, but a proper sized and set up Holley will always make more power (just a better design).
Love this! You know people have forgotten that for MANY years single barrel carbs ruled absolute. Granted they were designed for automotive use and not a lawnmower, but the point is, they were very capable carburetors. My '62 Chevy II had a single barrel Ball & Ball that would roast the tires without hesitation, the added velocity of the charge was key. Also to note, I had a 1976 Monte Carlo with a 350cid engine that originally came with the large 2 Barrel which I swapped out for a Quadrajet. My mileage jumped from around 21 to 27 because of the much smaller primary throttle bores (as long as I kept my foot out of the throttle. The move to larger carbs was needed for the demand for power which quite frankly sealed the fate of the efficient single barrels because the general public started demanding power over efficiency.
Qjets were fantastic carbs
I don't understand why you would think that this wouldn't work. When I was a boy, the neighboring farm had an old international dump truck with a 600 cubic inch inline 6 in it. The intake manifold and exhaust manifold were mated together, and it had a tiny 1 barrel carb on it.
It was decent on gas, but it had to completely warm up.
Easy to say now.
The general idea behind the spread bore (a.k.a Quadrajet) is to run on as small of a carb as possible until you need the extra air. Carbs work best when they have high flow
This is Automotive Genius at it's finest and shiniest example, bar none.
In history, men have had their lives ruined and their inventions to save fuel cost have been destroyed. Ridiculous or not, we all, as end user consumers, have been denied those ingenious benefits.
I think this is a wonderful "FU" to the greed of mankind.
It does not matter where you come from, I appreciate your tenacity to prove the point AND for keeping your channel OG.
Remember the multifuel carbs on tractors back in the day? They were vaporizers. Folks had it sussed out almost 100 years ago.
@@hoost3056 The Pogue carburetor comes to mind...
He ain’t the first and neither was the guy that did the basically the same thing in the 70’s that turned up dead and all his information on how he did it was taken and kept under wrap.
Engineers did come up with better carburettors…it’s called fuel injection.
Well said and I totally agree with all your points
Needless to say I am impressed. You need to market this! As a motorhead that enjoys restoring vintage vehicles, this would make those older classics less expensive to drive on a day-to-day basis. I would buy this set-up no questions asked.
trying to tell that man sign a death sentence....lol
@@RM-ti2bv What death sentence? I have a motorcycle that gets 100 miles to a gallon and a half of fuel, and I'm still alive. 🤷🏻
It's a scam are you all that dumb? Simple understanding of science would show you this is as true as HHO
I was thinking the same exact thing
Run lean and put a hole in a piston is what this scheiss is good for
Well Done Champ. Your control device is so elegant. So impressed. Yes that smaller carb venturi allows for superior fuel atomisation but it's your wise management of stoichiometric ratio under differing engine loads that takes full advantage of the better gasification = it is simply beautiful. Probably superior to any MPFI for economy.
This is one if not the best video I've ever watched on utube. Great content.
Loved the comment about coming from the trailer park-where you've been in life is never as important as where you are going. In life, we regret the things we do a lot less than the things we didn't-if you're unsure about how to improve your life, action beats inaction every single time and you miss 100% of the shots you don't take in life.
I build automated processes in my company and am a tool and die maker by trade and started on the shop floor. Everyone in this country has that opportunity no matter how humble our beginnings-you just have to want it.
I just happened to stumble upon this series at the start. I don't even know how it popped up in my view list but you had me interested right from reading the title of your first posting. I have been an automotive tech for over 30 years and I am quite impressed with your level of knowledge for your age. You effortlessly are able to explain all the science and engineering behind this project. I remember a long time ago hanging out in the garage with my buddies and discussing conspiracy theories about big oil companies buying up patented fuel economy devices just to keep selling fossil fuels. I really think your onto something here. I can't wait to see what happens with the 4 barrel. Please keep us posted on that.
I’m very excited for the 4 barrel test - will it give insane mpg? Doubt it - but there’s no harm in afr optimizing a carb to get the best fuel economy that that sized carb can provide
You do realise all of this has been invented tried and tested before now , this dude is just showing how it's done from his own levels of ability , the oil tycoons have killed people like him over and over to silence them so they can sell more fossil fuels , one thing I do agree with you on though he has a great head on young shoulders
@@ThunderHead289 heres a challange i have for you. roadkill style trip across america with the lawnmower carb. some spare tools beer or soda(idk if you drink or not). and some custom merch. let others follow you real time making the trip.
@@ThunderHead289 Funny thing is De Ja Vu I was working on a snapper lawn mower with a Briggs and Stratton engine and thecarb bowl was gunned after putting it back together I noticed somewhere I didn’t screw the bolts on all the way where a plastic piece feeds fuel air to engine and I said wow this is really atomized no fuel injection can get gas to be vaporized to smoke 💨 and I said this is what someone needs to put on a car and try maybe a bigger version of the same carb but oh yes it explained that the guy that made the carb for a car to run 60 mpg is real it’s probably a light car though. And it’s not far fetched carbs we can work on fuel injection and every new element seems to make the car worse to work on for average folks so they buy a new car
@@jonnykielbasa I have a built 351W with a Holley Demon four barrel I’m going to get rid of the Demon and put a cute little two barrel in it. At today’s gas prices 4 mpg doesn’t work very well
Watching this is cross between Mr. Wizard, Evil Mad Scientist and a curious mind. That could be very FUN and dangerous. Take me to the merch!
That was cool, being a small engine man. Always knew that once a lawn mower engine went past design rpm levels it went fat, never gave it a thought of a vacuum leak to thin the mixture. We used to build racing mowers and really spin the motors on them. Ya know using twins and singles. Reworked ignitions to help with the response. Basically doing the same as you. Huh this video really scratched the old think lump. Thanks.
This is the kind of content I like, I'm always on the lookout for informative auto related material. Man, this project really goes the distance. More of the same gets my vote.
I am impressed! Not enough techs in the industry with your caliber of understanding and ability to think out of the box!
I’m so impressed with everything you’ve done with that lawnmower carburetor. I would totally pay to get this set up on my RV to lower the gas consumption.
Hell ye dam rite my bruther dem fat muddafuchers be takin all de weelfare muneys. Donnald Tromp 2024!!!!
Well done young man. Never be afraid of doing something out of the ordinary. You might discover something exceptional. You did in this case for sure.
I would be interested in seeing how much cleaner the engine is running, emissions,spark plug readings. Sure runs nice! Enjoy the channel!
Keep in mind that this was only highway driving in a straight line in Iowa. Traffic in Iowa I would imagine must be sparse and the state is mostly flat. Modern cars can already adjust for fuel trim and timing advance and an ungodly amount of catalytic converters.
@@eaglewarrior8707 And most newer cars are not getting 40 MPG and flat, sparse highway either. Especially larger engines. Heck, most smaller engines are not getting that.
@@eaglewarrior8707 this is not the point buddy. you should focus if this engine runs with 4 barrel what kind a mpg should can do in same situation.
@@eaglewarrior8707 the results are the same with other underpowered vehicles, they are tested in similar ways, unless asked otherwise. It is the poor and stupit game of the government manipulators of money and the stolen corrupt venerated fortress of god's they stole and have claimed to have overthrown god. they are shit.
@@yunusertas you can easily increase your MPGs with a 4 barrel as well. Take the same concept he has here, adjust it and apply it to the 4 barrel. I don’t see how or why it shouldn’t work. Maybe not 40 mpgs but you can definitely get better than out of the factory.
That was an easily earned subscription. Good job. You could nearly single handedly save the entire classic car industry.
Turning down the pressure made this carb WORK. I'd of considered doubling the fuel bowl and missed that. An amazing level of information,
This is mind blowing. Obviously you have got a lot of mechanical and electro digital and drafting/engineering knowledge. Got to say I am extremely impressed. Very well done. Keep up the experiments and best wishes in the future.
wow, wow and wow, hubby is a mechanic and is very very impressed with you, also mentioned that you would make a great automotive teacher
I would love to see a dyno comparison between the the two carbs to get an idea of the mpg-horsepower ratio
Only so much power can be made with that fuel.
@@Jeff-qq4zotrue, but the two setups might not provide gas milage prepositional to their prospective horsepowers
(A 300hp car could get 15mpg while a 150hp car, with more efficient combustion, might make closer to 40mpg)
@@snipesy the real question with ice is thermal efficiency
It made 59hp on a chassis dyno in another video lol. 140ish ft.lb. of torque
And it got around 40mpg on the Power Tour
This is awesome. I would love to see this same setup on a 4 cylinder carbureted engine. I bet the gas milage would be crazy.
Most 4 cyl cars engines are 2 lt and up. I would like to try a set of 4 carbs for a 1000 or1200 cc motorcycle on a 4 cyl car
@@foxmaine3921 I don’t think you’re understanding why they’re using a tiny carb on a v8 or 4 cyl. Itbs or ic setups aren’t know for being efficient just strong
@@stoney3694 He said it plain as day. He never thought it would work it was a joke.
@@foxmaine3921 elderlyiron did that in a 6 in line Chevy truck and it worked good, he used 2. motorcycle carb
ua-cam.com/video/obzULioHc64/v-deo.html
Final mpg test is around 55:00. Super interesting video 💯 might have to find an old car and do this myself 👍
Subscription earned. Not only did you make an hour long tutorial on stuff I wish I could figure out or try but never would be able to lol!! But you never made the excuse and bring this type of OG stuff to the table to make my night! My Dad always told me it’s not what you know it’s who you know. You’re the kinda guy that can get out of anything ahaha!!
The IAC unit was brilliant. That's the advantage point. This shows that it IS possible to make a Carb unit compliant inexpensively and be made completely functional. Fantastic job!
Luke is well on his way to UA-cam legend status. 👍 dude I can't get enough of this project!
Man this was so cool to watch! Very impressed with your knowledge of both mechanical engineering and programming ability! Subscribed! 👍👍
Much respect bud💪🤠 it's amazing how many extremely useful things have be created after an "impossible " idea followed by why not 😉
If there EVER was someone who DESERVED a "liked and subscribed", it is certainly you, my friend!! Exceptional effort! Amazing Video!! It does my 66 y/o heart proud to see that there are youngsters of your caliber out there today.. Well done my man! This video will be on my mind for quite some time, I'm sure!!
Hey there! I agree that it was a high-effort video. Also don't forget that Jesus Christ loves you sir! God bless.
Hell ye dam rite my bruther dem fat muddafuchers be takin all de weelfare muneys. Donnald Tromp 2024!!!!
I was wondering what kind of compression and cam size that 302 has and what was the timing set at while running on one barrel
A lawnmower carb on a 302 is a hilarious idea, but the way you’ve done it and the results you’ve achieved are really impressive
Don't ever listen to those fools!! I injoyed the hell out of your instructions and you are very knowledgeable about what your doing and I am amazed at it all!! Very very cool and I wish I had some of that ability!!
I’m sorry this sat in my watch later playlist for so long. Great work and great music!
Your grasp of the tech involved in what makes an engine run is very impressive. very well done young man. Yep I may just try this myself, I have an inline 6 with a two barrel on it and a pile of lawn mower carbs.
As a 3D printing enthusiast (custom built my own 3D printer out of the parts of another), I would highly recommend you use a 0.5 (what I run) or a 0.6mm nozzle, with layer heights around half the nozzle size. High resolution for that type of part probably isn't super necessary to its function. Also, your part probably doesn't need to be as beefy as you made it, considering it's not running under any real pressures. Instead of making the base of it so thick, maybe add ribs instead. Slim it down, take a lot of the unnecessary material out, and save yourself some filament money! Great work man, your MPG result is pretty crazy.
I'd recommend layerHeights =< (nozzleDiameter/phi) for strength. I'd say go equal to that number for speed & strength.
I like lineWidth = nozzleDiameter too.
I agree, 0.6mm diameter is a great nozzle in terms of speed and detail.
There's also an interesting recent video by CNC Kitchen that I'd seen which details the maximization of printing speed with respects to volumetric extrusion.. The title is "Easy Hotend Benchmark for FAST PRINTING Profiles"
IMO that idea is revolutionary in the same sense of applying the small engine carb to the V8.
If you set that up then you will save so much of your valuable time! ..especially if you want to mass produce kits.
@@Paint0nBrush when he closes the throttle the vacuum probably jumps up to around 29 or higher which puts atmospheric pressure on the outside trying to collapse the plastic intake, I say beefier the better especially under the hood with the heat.
I love this! I too get challenged by "can't be done" comments. Not that I'm rushing out to put a lawnmower carb on my VW but I did put an SU carb on it ("couldn't/shouldn't be done) and I reckon one can make any adaption work with enough determination!
This is so awesome for a project. I'm blown away.
I think I was more impressed by your 3d printed parts and your vacuum control setup than the overall success of the test. I'm no expert in fluid dynamics, but it all made sense to me and why it was successful.
Dude! I've wanted to experiment with something like this for over a decade. Glad a fellow Iowan was the one to try it out. I've been looking at various carbed cars the past couple years, intent on getting back to my roots, and now I really want to try that setup on whichever I end up getting. I'm hoping for the 78 Buick Regal V8 if all goes well the next few weeks. I'm moving from Texas back to Cedar Falls soon, too, so I'd love to have someone as motor-nerd as I am to bounce ideas off of. Rock on man! 40mpg in a 78 Regal for daily driving and road-tripping is my main goal for the year.
Great vid! All around impressive experiment, curious on the dyno numbers. The mpg's are worth what ever the power loss is, make a two carb system... lol. Keep up the good work, and yes sell the kit! Don't miss this opportunity, people will buy it, fuel isn't getting cheaper👍
Sorry to hear that so many people have been so rude to you. I thank you for the information / education. I am working on a Quadrajet for my 350 GM boat motor.
This is the coolest stupid thing I've seen that worked soooo much better than expected, as it wasn't expected to even work. Great work on working out all the problems.
I knew an old guy who told me about old carborators getting 60 mpg then that old tech was bought and hidden from public use. This video makes me believe him. Most excellent video, thanks man
Yeah I'm almost certain we had the knowhow to have far more efficient vehicles long ago but to keep the industry neverending advancements get put out in a planned order. That and planned obsolescence will keep us buying cars for many decades to come.
My 2018 GMC half ton crew cab 4x4 with the 5.3 gets 30 mpg on the hiway at 60 mph and has tons of power , I had a GM sprint with the 3 cyl many years ago that got 75 mpg on the hiway , the manufacturers have done a great job moving a lot of weight with the power that people want .
Here I thought the music was Alice in Chains. I have a new band to listen to now, thanks for giving credit, I'm shocked Skorned isn't more popular.
Love the neatness cleanliness and state of the Art organisation
Carb conversions are my favorite. Me carburated my previously EFI Honda Civic for funsies. First version was a VW beetle carb. Second Version was the WEBER 32/36. I used a 1990 DPFI intake manifold and made adapter plates. I think my next project will be my vg30 on my Nissan hardbody.
It is always nice to see someone who shares the same hobby.
Hi Luke, I just have to thank you for the incredibly informative and helpful content you put out. Very impressive, you've helped countless numbers for sure. Please consider creating some type of Carb Cheater tech kit. You would again be helping countless numbers in a world where rising costs are pushing many to make some tough choices and find efficiencies wherever possible.
With some of the highest food prices and gas here in Eastern Canada nearing $9.00 a gallon it's becoming quite a struggle for many, myself included. I would quite happily rip into my daily/work truck, an 88 F150 with an aod trans, remove the efi system and convert to a similar setup you've accomplished with the Maverick. The knowledge and understanding to put that setup together has proven to be quite valuable given the interest shown. I stand with them and would definitely invest in what you've created. Cheers from Canada
I admire this. I watched this late. I would have believed this to work. Would not have been a disbeliever, but only at limited RPMs, because of the lawn mower having limited different circuits compared to a cars carb with an an idle circuit, power circuit, accelerator, etc but your really Ingenious idea of the carb tuner fixed this. I also would not have been one to think it would run lean, because of the limited air flow. But also would not of thought of it making it run run rich!! Damn good thinking.
As far as better fuel milage, as an old guy I understand that smaller carbs give a much better fuel atomization.
This was Cool
Not good at math! LOL
Just stumbled on this video. You know, there was someone who claimed to have invented a carb that could get incredible gas mileage, but the oil companies wouldn't allow that. Now, this is from a year ago. So hopefully he's still alive. ;-) Well done!
I really enjoy your work not only on this project, but on most all your videos. When I have questions about the carb or timing on my Mustang your videos are my go to tech manuals. Thank you for the content and all the hard work that goes into making it.
Dont publicize, keep sharing
That is amazing man. I literally had to see it to believe it. What an achievment.
Awesome! I would make some intelligent observations here but suffice to say - WOW! Mind is blown.
I love this....showing those dudes who doubted you that anything can be done if you're smart enough. Luke, you may be a certified genius!
Great little series man! Love the content and your style. You seem like the guy I’d love to meet at car shows and swap meets and just talk car and motor stuff!
That means a lot, thank you 🙂
Have to agree. But would need a recorder, he has too much info for me to retain all at once. lol
So happy you continued this series Luke! Always a pleasure to see what you're up to. Happy you show the nay sayers wrong. Have a good weekend!
A kid like you could run circles of some college grad in engineering ! Good Job !
this is one of the coolest and most interesting videos I have ever seen
That was ridiculously impressive! I’m blown away on multiple levels on what you’ve accomplished here. Wow! Is all I can think of. You’re intelligence and understanding of fluid dynamics is amazing. Would love to be friends and pick each others brains and share knowledge. Bravo! Compliments!!
I think it would definitely be worth your time to try commercializing the system. Try it out on your 1964, and your 390 V8 truck for more proof of concept. If you could get 25 MPG out of the truck... (I know it’s low geared)
It doesn't work, or he would be rich beyond belief.
Yeah , but remember what happend to that dude that came up with the carb that got 500 mpg ? Right ?
Ahhhhhh huh.....lol
@@jamessignorelli2808 Let me guess. The oil companies had him disappeared?
🤣🤣🤣🤣
@@shermanwest3168 what eauggg oohhh humm, I wouldn't know anything about that ,
All I know is never showed for his datsun tune up ....
OK , I GOTA GOO !........LOL
Absolutely sensational.I thoroughly enjoyed this presentation. Brilliantly done. I have been in the mower repair business for 1000000 years, I learned a lot from the settings you chose - now I want to go do the same. Perhaps a Subaru ???
I JUST CAME ACROSS THIS , YOU ARE A VERY INTELLIGENT PERSON, THIS IS FREAKING AWESOME, 40 MPH IN A V8 , SWEET DEAL BUD , BE CAREFUL WHAT U CREAT AND SHARE , GOVERNMENT DOESN'T LIKE PEOPLE STEALING THEIR MONEY
Great stuff man, ingenuity at its finest! I would love to see more detail on how you designed and built that idle air bypass to keep the AFR's around 14:1 though, and the app design. I'm good with all the mechanical and ignition stuff, but that APP and your FMB (fucking magic board) you built are beyond me.
Same here! I'm slowly teaching myself some basic programming in order to put a fully digital dashboard in my Frankentruck, but it's slow going.
I like your era of music my brotha👍 I'm a huge Primus fan myself. Keep on doing what your doing and thank you very much for the awesome content my brother.
Congratulations!!
I’m a Chevy guy. But I have been checking out hour videos for couple years now.
Your stuff is very informative, well versed and easy to follow.
I’ve logged thousands of miles across Iowa dirt track racing in the past!
Best of luck to you in all your endeavors!
I would love something similar for my 87 square body 4x4 dually 454 BB
Ps you deserved the like and subscription hands down!
Impressive! Smart guy,good content. Love the way you think things thru.
Would be interesting to see emissions and EGT readings. Congrats bro, you're a petrol head with the brain of a genius.
Absolutely love this series Luke!!! I think a lot of people might be interested in this setup including myself
I think it would be fair to say this type of ingenuity is not something the auto manufacturers want out there. Such good work!
Absolutely amazing! Don't ever let someone tell you, you can't do something. EFF THEM!!
l keep rewatching these videos, there really well done... l cant wait to try the same thing...
Now comes the time to start selling the adapter
Fun build. I had a 72 4 door that I bought for $100. $25 at the junk yard replaced the fender/bumper and related junk. I drove it for about 2 months without an air filter and a connecting rod found it way out of the block. Good times.
Thinking outside the box 📦 😮. Good Job 👍
I think you did well...in 1982 I worked for Honda we had ordered a few Civics that had a little tiny one inch or less Throttle plate on them and they were apparently good for 62 miles per gallon ..fun fact .. That air in a smaller intake will travel faster than air in a bigger one..plus if you want to increase air in a smaller pipe just mount a small egg into the intake with a variable height slider ..it will pull in more air..old german Tech
What do you mean increase air in a smaller pipe?
@@yeboscrebo4451Air velocity will increase but volume will decrease with an egg.
I would definitely like to see this run on a slightly more definitive fuel measurement, put a gallon in a container and tie it in then drive it till it’s almost drained measure the remaining amount in the container and calculate mpg
Agreed... There is too much variance in how a gas pump nozzle measures a full fill-up to rely on that...
@@CurmudgeonExtraordinaire except the regulation and regulating body and regulators and inspections but okay
@@colormesarge -- All the regulations and inspections do is try to ensure that a pump measures a fixed amount of fuel within an acceptable variance, not that it is consistent in when the nozzle thinks the tank is full... They want to ensure that if the pump is charging you for 5 gallons of fuel, you are actually *getting* 5 gallons of fuel.
Nozzle shutoff is what can vary and makes his way of testing potentially inaccurate... A pump speed (gallons per minute delivered) can vary over time. If it is pumping at a slower rate, it will allow more fuel to get into the tank before the nozzle shutoff occurs... I've been able to get over a gallon of extra fuel in a car by pumping slow... I've also seen pumps that delivered fuel so fast that the nozzle would kick off when the tank was only half full...
The fuel climbs up the filler neck and shuts off the fuel. That's got to be accuracy within like 2 oz.
Especially when it spills out on the second fill.
@@CurmudgeonExtraordinaireWhy would it not be that accurate?
I had a friend that owned a granny grocery getter, 1973 Dodge Dart, with a pre-smog controlled, wheezy, anemic 318 cid V8. It had a small one bbl carb about the same size as the one in your hand. It was good it wasn’t fast as this guy was not so bright but fairly reckless, mostly driven by his not so brightness. It would have needed a lot of suspension and steering work to make it speed worthy. I think it did get pretty good fuel economy. Super build! Thanks!
Nice work, shows what can be done.
In my younger years I messed about with cars and carbs. I worked on cars in the Fuel "Crisis" days.
I put a DIY Pogue vapour carb on a 3 litre and got 54 mpg.
I put an SU carb from a British Leyland on RX3 madza, and an even better one on an RX7 and got 35 mpg @100mph.
Means if you or I can do it from our garage, the Industry can do it in spades with all their resources.. so why not..
It'$ all about the Money. Every time.
Still got the bits in a box somewhere.
This was a fun project. I've really enjoyed this series. Thank you!
I just stumbled on to this guy today. I think he's an awesome dude. Righteously cool. I dig this channel. Cool cool cool! Great video. Totally fun project. Why would anybody give him a bunch of negative crap? We're with you Mr. Thunderhead289!
One could only imagine your theory applied to a motor cycle or marine engine , your brilliant. Great work.
I'm very impressed. Great job!
This guy is great but something tells me he's gonna windup on a milk carton if he keeps this up🤣
exactly what i was thinking
I wonder if the nervous shaking he experienced after seeing the gas mileage was the thought of the gas cops pounding on his door in the middle of the night! lol Just Saying 😵🤣
@@robertburleyson7444 I'm with you! I wouldn't be tell anybody about something like this its just asking for trouble. A one on one showing is a safer bet if you feel this info should get out there. No one will be trying to get you in trouble and you wouldn't be having the shakes of the what if's.
@tatersncorn if anything, this could be what keeps gas-powered cars alive and safe from the takeover of battery cars.
He hasn't posted in a while uh oh
doing a awesome job on this, way back during bush and gas hitting 4.00 a gal i was fooling with hydrogen generators to increase gas mileage. managed to get a merc capri from 25mpg to 45 mpg. i would love to see you add a hydrogen generator to your lawn mower carb which would be pretty easy to do. i bet with the combo you would hit over 100mpg
Do you have any videos or info you could share about your hydrogen setup? These gas prices are giving me PTSD every time I fill up my truck.
I think what you are doing is awesome! Nice work and free thinking!
I think what AND how you did what you did, is freaken AWESOME!!! GREAT job buddy!!!
I'm incredibly impressed by all of this. 1st, your 3D printers are awesome, I print a lot of Priline CF PETG and it can be a pain although I use much bigger tips. 2nd, you took Adruino to another level and that controller you built has a ton of potential I believe.
You did a fantastic job on your video production !
I find 3D printing fascinating!!
Amazing young man! Great job!
This was awesome. Great insight into how it works. I think you should definitely market this.