I'm using a brother laser printer but I'm not sure why the B paper is not fully coating the toner on the A sheet. Do I need to set my printer and print settings to heavy in order to mitigate this issue?
Thank you. I bought this paper and I am having hard time with the finishing. I dont know what is the paper sheet that i have to use to avoid the image get damage, can you send me the link if you sell it please
The finishing paper is wax paper with a silicon liner. They are offered in Gloss and Matte - uscutter.com/Forever-Laser-Dark-Low-Temp/?source=youtube I personally prefer to use matte finishing sheets because they will last much longer than the glossy finishing sheets.
I bought this product after viewing videos on it. But the problem is that it doesn't matter how well the B paper transfers to the A paper, it just doesn't adhere to the garment. Or, the image completely transfers from the A paper to the B paper. It is so frustrating. I have went over your video on the part of the why you may issues, yet still is a fail. Have read other posts out on the web that some B papers are bad? Can you provide some insight on this please... I'll be forever grateful......
If your image is transferring from the A paper to the B paper you are allowing the A & B sheets to cool down too much when peeling them. If you are having good A&B Transfers and but are finding that the adhesive is sticking to the shirt but not all of the flexsoft is transferring over to the shirt it could also be the toner you are using. Stay away from the lower cost replacement toners and use either the OEM manufacturer toner or something from Ghost, Oki, or UniNet.
You can create multi color designs with it, but you have to be really careful when applying it to your substrate. If the A sheet was to come into contact with any toner at all then it will stick to it, so you need to be careful when applying it around your previous transfer.
Thanks can you make a video showing how to layers the colors in photoshop. iv been looking everywhere and I see videos with people pressing the colors together but not how to do it in photoshop
Photoshop isn't a product that we offer, so I do everything in Vinyl Master DSR. Forever actually has all of the information you are looking for located on their website for Flexsoft. This link will take you to it - www.blacktonertransfer.com/support/downloads-1/
I'm having issues with getting the logo print properly, stick to A&B, and to final shirt. I've wasted so many vinyls it's disheartening. I have the same hp 452 dw and I have a 16x20 HPN auto/drawer sig press. I sold everything years ago because I couldn't figure out how to successfully complete one project. I went and got a better press and I'm still having issues. Can someone help me please
You will want to send pictures of the failed attempts along with all of the details of the process you are using over to SUPPORT@USCUTTER.COM I would also let them know what type of heat press you are using.
I use an Epson 7710, but i really hate the cutting process and the transfer on black tshirts is a pain in the asse. Should I change to a laser printer CMYW. Question no 2 - where can i buy this type of paper in Europe?
If you want to use the flexsoft you can use a cheap monochrome laser printer for these papers. Forever is a German company so you should be able to find it with ease in Europe. www.blacktonertransfer.com/
Hi! Can i use ink jet printer? Like cannon G2010?
No. It only works with laser toner.
Can I use any laser printer without white tonner?
I'm using a brother laser printer but I'm not sure why the B paper is not fully coating the toner on the A sheet. Do I need to set my printer and print settings to heavy in order to mitigate this issue?
Heavy glossy and then increase the density of toner that the printer lays down.
Im also using a Brother laser but can't seem to get it to fuse
Nice work Josh! Thanks!
Are the flex soft and rhe forever subflex the same thing and can you use the sawgrass printer for them
Thank you. I bought this paper and I am having hard time with the finishing. I dont know what is the paper sheet that i have to use to avoid the image get damage, can you send me the link if you sell it please
The finishing paper is wax paper with a silicon liner. They are offered in Gloss and Matte - uscutter.com/Forever-Laser-Dark-Low-Temp/?source=youtube
I personally prefer to use matte finishing sheets because they will last much longer than the glossy finishing sheets.
I bought this product after viewing videos on it. But the problem is that it doesn't matter how well the B paper transfers to the A paper, it just doesn't adhere to the garment. Or, the image completely transfers from the A paper to the B paper. It is so frustrating. I have went over your video on the part of the why you may issues, yet still is a fail. Have read other posts out on the web that some B papers are bad?
Can you provide some insight on this please...
I'll be forever grateful......
If your image is transferring from the A paper to the B paper you are allowing the A & B sheets to cool down too much when peeling them. If you are having good A&B Transfers and but are finding that the adhesive is sticking to the shirt but not all of the flexsoft is transferring over to the shirt it could also be the toner you are using. Stay away from the lower cost replacement toners and use either the OEM manufacturer toner or something from Ghost, Oki, or UniNet.
Do you have to layer the different colors on same shirt
If they are overlapping each other then you will have to layer it.
Any way to remove a Forever flex-soft mishap easily? Cannot find ANY info : /
Is this the same paper as advertised on Ghost's website ? Laser-Dark (No-Cut) A-Foil Finishing A3
Heya! Probably a dumb question but is this able to use for multicolor images or no?
You can create multi color designs with it, but you have to be really careful when applying it to your substrate. If the A sheet was to come into contact with any toner at all then it will stick to it, so you need to be careful when applying it around your previous transfer.
Thanks can you make a video showing how to layers the colors in photoshop. iv been looking everywhere and I see videos with people pressing the colors together but not how to do it in photoshop
Photoshop isn't a product that we offer, so I do everything in Vinyl Master DSR. Forever actually has all of the information you are looking for located on their website for Flexsoft. This link will take you to it - www.blacktonertransfer.com/support/downloads-1/
I'm having issues with getting the logo print properly, stick to A&B, and to final shirt. I've wasted so many vinyls it's disheartening. I have the same hp 452 dw and I have a 16x20 HPN auto/drawer sig press. I sold everything years ago because I couldn't figure out how to successfully complete one project. I went and got a better press and I'm still having issues. Can someone help me please
You will want to send pictures of the failed attempts along with all of the details of the process you are using over to SUPPORT@USCUTTER.COM I would also let them know what type of heat press you are using.
I use an Epson 7710, but i really hate the cutting process and the transfer on black tshirts is a pain in the asse. Should I change to a laser printer CMYW.
Question no 2 - where can i buy this type of paper in Europe?
If you want to use the flexsoft you can use a cheap monochrome laser printer for these papers. Forever is a German company so you should be able to find it with ease in Europe. www.blacktonertransfer.com/
@@uscuttervideos Thank you so much!
My tshirt print got ruin after the first wash, even when I washed inside out
Will it work with P3300 series monochrome laser printer?
I have never heard of that brand of printer until this comment so I can't say if they will work or not.
possible shipping to tunisia ?
International@USCutter.com can help with that.
Niice
No No No noooo not working, i am no idiot but no cannot get this to work, no. Jumping through all the hoops but again noo.