At 3:06, there's a step missing that should inform the buyers to loosen the 1/16" hex screw in the cover before trying to remove the inside ring. I struggled for half an hour before I realized that was there.
I have the 4K xsight and now the ABL 1500. What a great set up! Thanks to Rod Gerard, Kenny Acres and Jonathan Flores at ATN customer support/tech support. Love it. They really are great folks. Went out today sited in. Scope and range finder could not ask for anything better. Hunting season right around the corner. I bet it will look good on the crossbow. Do I hear elk in my future.
Good Video, except you forgot to mention the tiny set screw on the casing right above the 2 set screws that should be loosened and then subsequently tightened after retightening the 2 set screws.
Once pairing and zeroing are done. What else is still to do? If you put the cap back (allen screw) then how do you actually use the ABL laser? Please help
Mine was working great until today. Range finder working but not adjusting scope to proper yardage. I was shooting 100yrd then 200. Any thoughts? Scope has latest update
@ATNCorp Does it matter if you zero the ABL before you have zeroed the sight for the right caliber? Do you have to zero the ABL everytime when you use different caliber/ballistic profiles?
If I have my Thor 4 sighted in at 100 yards and i have my Abl 1000 turned on and it was ranged at a target that was 64 yards away, when i power off the Abl and the Thor, would it revert back to my 100 yard zero when i power my Thor 4 back on? Or will it still be set at the 64 yards?
If the BC is turned on then it will adjust to the range you have on the screen. If the BC is off it will show the crosshairs to the 100 yards you zeroed at.
Once this is set up on a thor 4 thermal scope and paired. When changing targets through scope should the ABL be giving a reading at top left for new target as scanning??? Or do you have to push the range button for each new target distance?
I can not see the lazer when zeroing. I have tried to adjust the mounting of ABL twice ,,it seems to be aligned. and bench testing it should be lit up in cross hairs,,,its right there but just cannot see it thru scope
I put rifle in a holder and the red dot lazer was on bullseye while zeroing. Yet I could not see it thru the scope. I zeroed the crosshairs anyhow. Its was only off by a inch or so. I can see the lazer plain as day ,,but not thru scope. Can you see the lazer through the Thor 4??? From this video sure seems like you can??
Hi, can you fit range finder to the other side of scope (right hand side) as i have ATN X sight 2, and the i/r torch fits to picatinny rail on left hand side of scope, thank you. Tim
tbh I cannot see the point of the laser. Mine is obviously off because when I zero it as advised it ends up quite a way off from the cross hairs. This results in a false distance. So I just adjusted the ABL box until it was on the centre of the target, omitting use of the laser and problem solved.
whats the best distance to zero the ABL? I did it at 20 yards bang in the center. But when I rechecked the ABL zero at 40 yards the laser dot was outside of the reticle box.. So there is crossover accouring.
Hi, got the X-Sight II and when i put on the ABL it obstructs the IR Light. Can you turn the ABL to the other side without running in to any problems? When it takes readings or ranging i mean.
Hi ATN Corp ABL looks great .... But ! Can't find anything about. This is the question that ails me. So ATN X-SIGHT 4K PRO pared with ABL The ballistic computer can correct the impact point for a moving target ??? Aiming at a target with the rangefinder the speed of the target is easily calculated. If it is not now, I hope it will be done in the next software update. this will be awesome.
Do you have to push the button before every kill shot? How long will it hold that yardage reading to shot at game ? Does it make a difference if it's like you did at 9 o'clock or like some people do 12 o'clock?
Very informative video. If shooting say at 30 yards or 200 yards will it automatically adjust the zero point? Also does it account for wind, humidity and temp? If so can you do a video of that?
It does EVERYTHING all you have to do is put in the ballistic info! And if it's a windy day, keep telraxk of that and input it in, then range it and shoot! The ABL will do everything CORRECTLY, only if you input the Ballistic info. In correctly!
Hey ATN my ATN Auxiliary Ballistic Laser 1000 does not pair with my ATN X-Sight II HD 5-20X. I have installed the latest firmware 2.1.07.779! can you help me ? A video on the subject would be good (ATN X-Sight II HD 5-20X). I live in Netherlands, tele to USA is expensive .. Greetings Rick
Great Video! How did you stream the sight image including the widgets? My recordings only show the crosshairs and the ATN logo in the lower right with the range, but nothing else in the viewfinder image in the scope itself... Would love to have the widgets in the recordings as well...
Great video. Can you tell me if your scope is set at say 50 yards and you range find some at 150 yards does it automatically adjust the crosshairs to that range?
@@AtncorpOptics you know I personally can think of about 5 things you can do to improve your scopes to make them that much better.. but I'm never going to be able to afford them so
@@AtncorpOptics I will be shooting up to 200 plus yards with a hmr so if I don't enter the wind speed and environment will the scope still automatically a just the point of impact?
@@AtncorpOptics sorry guys ...reside in UK...I am OK with the zero process just cant get the laser to shine on the white target at 50yrds..can supply my e/mail address
I zeroed mine at night using night vision mode on my X-Sight 4K at 48 yards. You can clearly see the laser but it shows up as an elongated dot, not a round dot. I zeroed it to the middle of the elongated dot.
I purchased the ABL 1500 for my ATN ThOR 4 640 4-40 and the ThOR 4 series ring is too small, so it won’t screw on to my scope. Without the proper ring there’s no way I can install the ABL 1500.
@@AtncorpOptics I got the abl1000 and have the X sight HD. When pairing it did not turn blue it is white but says it is paired does that matter?? I can not find the advanced settings option ??
Hi once I've set up my ABL, if I remove it from the scope will I have to go through the whole set up procedure again or will it be ok just to refit to the scope and use again straight away?
That's not what I heard I'm going through and seeing countless reviews where they say the battery doesn't last at all 20 minutes dead it's crazy when companies try to upsell but cannot get back two people that's trying to figure out why it goes dead so fast
And he says use lubricant to get the thing on. That’s a horrible idea unless it’s DSLR lube. You put 3in1 or kroil on that you’ll never get it off the lens surface without solvent. And most chemical solvents are death to electronics.
@@andrewthompson4093 I would check the battery. Make sure that the plastic cover on the battery is off. Also could be a bad battery. Try a different one.
Very good job - overall. However, the speaker needs to learn to speak up and denunciate much better. There's just too many words he says that are not understandable.
At 3:06, there's a step missing that should inform the buyers to loosen the 1/16" hex screw in the cover before trying to remove the inside ring. I struggled for half an hour before I realized that was there.
I have the 4K xsight and now the ABL 1500. What a great set up! Thanks to Rod Gerard, Kenny Acres and Jonathan Flores at ATN customer support/tech support. Love it. They really are great folks. Went out today sited in. Scope and range finder could not ask for anything better. Hunting season right around the corner. I bet it will look good on the crossbow. Do I hear elk in my future.
Thank you for the feedback and enjoy the scope sir.
Good Video, except you forgot to mention the tiny set screw on the casing right above the 2 set screws that should be loosened and then subsequently tightened after retightening the 2 set screws.
Best how to video I have seen. Nothing missed all details shown. Thanks!
My favorite scope by far ! X-Sight 4K pro with the ABL is outstanding. I’ve recommend this scope to all my friends !
do you have any review videos and or info to share? im currently shopping.
Make an update that you can put the shot counter to count down while viewing through scope, be awesome for ar15s
6:23 you said hit the Bluetooth connect on the able once, mine I had to do twice, manual also said hit it twice, in case anyone has troubles.
Once pairing and zeroing are done. What else is still to do? If you put the cap back (allen screw) then how do you actually use the ABL laser? Please help
Mine was working great until today. Range finder working but not adjusting scope to proper yardage. I was shooting 100yrd then 200. Any thoughts? Scope has latest update
You didn't loosen the indexing grub screw.
so did i hear that the ATN Thor 4 has essentially a built in range finder?
@ATNCorp Does it matter if you zero the ABL before you have zeroed the sight for the right caliber? Do you have to zero the ABL everytime when you use different caliber/ballistic profiles?
If I have my Thor 4 sighted in at 100 yards and i have my Abl 1000 turned on and it was ranged at a target that was 64 yards away, when i power off the Abl and the Thor, would it revert back to my 100 yard zero when i power my Thor 4 back on? Or will it still be set at the 64 yards?
If the BC is turned on then it will adjust to the range you have on the screen. If the BC is off it will show the crosshairs to the 100 yards you zeroed at.
@@AtncorpOptics awesome Thank you!
Once this is set up on a thor 4 thermal scope and paired. When changing targets through scope should the ABL be giving a reading at top left for new target as scanning??? Or do you have to push the range button for each new target distance?
Great explanation. Thanks
Hello I have an x sight 2 HD and I dont see an advanced shortcut menu
My abl 1000 not displaying yardage, did exact same steps as video showed
I can not see the lazer when zeroing. I have tried to adjust the mounting of ABL twice ,,it seems to be aligned. and bench testing it should be lit up in cross hairs,,,its right there but just cannot see it thru scope
I put rifle in a holder and the red dot lazer was on bullseye while zeroing. Yet I could not see it thru the scope. I zeroed the crosshairs anyhow. Its was only off by a inch or so.
I can see the lazer plain as day ,,but not thru scope.
Can you see the lazer through the Thor 4??? From this video sure seems like you can??
Good morning. Can the ABL 1000 be mounted in any position or only on the sides?
You can put in the top position too. Works the same
Why does the battery cover look all scratched up?
Hi, can you fit range finder to the other side of scope (right hand side) as i have ATN X sight 2, and the i/r torch fits to picatinny rail on left hand side of scope, thank you. Tim
You can pivot the rangefinder to the other side. Just make sure you re-zero it in that position.
Why does the reading go from 109yds to 18yds?
tbh I cannot see the point of the laser. Mine is obviously off because when I zero it as advised it ends up quite a way off from the cross hairs. This results in a false distance. So I just adjusted the ABL box until it was on the centre of the target, omitting use of the laser and problem solved.
7:09 why only during the day?
This looks great!
How do you install it without that inside ring?
whats the best distance to zero the ABL? I did it at 20 yards bang in the center. But when I rechecked the ABL zero at 40 yards the laser dot was outside of the reticle box.. So there is crossover accouring.
Zero the ABL at 50 yards or further if the red laser is visible to you in the current lighting conditions.
It's the same thing I noticed as well! Then I had to ReZero my ABL and scope....
Hi, got the X-Sight II and when i put on the ABL it obstructs the IR Light. Can you turn the ABL to the other side without running in to any problems? When it takes readings or ranging i mean.
Hi Daniel. The ABL can be mounted at any clock position. You will not have any problems with ranging if you turn it to the other side.
@@AtncorpOptics Thanks 👍😃
why does my box not match up with my cross arrows when i range!!! and yes i zeroed it at 100 yrds
Are you referring to the ranging box not matching your sight cross hairs?
Hi ATN Corp
ABL looks great .... But ! Can't find anything about.
This is the question that ails me.
So ATN X-SIGHT 4K PRO pared with ABL The ballistic computer can correct the impact point for a moving target ???
Aiming at a target with the rangefinder the speed of the target is easily calculated.
If it is not now, I hope it will be done in the next software update. this will be awesome.
The ABL only measures the distance to target and gives you a new POI to that distance.
Do you have to push the button before every kill shot? How long will it hold that yardage reading to shot at game ? Does it make a difference if it's like you did at 9 o'clock or like some people do 12 o'clock?
Very informative video. If shooting say at 30 yards or 200 yards will it automatically adjust the zero point? Also does it account for wind, humidity and temp?
If so can you do a video of that?
Hey bro how’s the scope . Does the ballistic work ?
It does EVERYTHING all you have to do is put in the ballistic info! And if it's a windy day, keep telraxk of that and input it in, then range it and shoot! The ABL will do everything CORRECTLY, only if you input the Ballistic info. In correctly!
IS the ABL compatible with the X-Sight LTV 6 x 18?
NO, it is not...only compatible with Xsight ll, 4k pro, & Thor
Es legal utilizarlo de dia al no llevar el ir incorporado gracias
I have the abl 1500 an I can’t even see the laser at 50 yards is less ok
Hey ATN
my ATN Auxiliary Ballistic Laser 1000 does not pair with my ATN X-Sight II HD 5-20X.
I have installed the latest firmware 2.1.07.779!
can you help me ?
A video on the subject would be good (ATN X-Sight II HD 5-20X).
I live in Netherlands, tele to USA is expensive ..
Greetings Rick
ok, newby question, does the abl pair every time you turn it on, or do you have to pair each time you power up?
It will pair automatically after doing the manual pair process.
Does the scope need to be zeroed before zeroing the abl?
Yes it is best to zero scope before zeroing ABL
I understand the purpose of a rangefinder, but how, specifically, does the ABL 1000 / 1500 interact with the scope?
He told you,bluetooth
Great Video!
How did you stream the sight image including the widgets? My recordings only show the crosshairs and the ATN logo in the lower right with the range, but nothing else in the viewfinder image in the scope itself... Would love to have the widgets in the recordings as well...
This was done by an internal application that is not available to the public.
@@AtncorpOptics not available to the public *yet* I hope
@@SeanWinkler I always assumed by seeing UA-cam videos you could see everything, Kinda Crazy not to see it all.
How can i buy this?? I'm in Indonesia. Thx
Great video. Can you tell me if your scope is set at say 50 yards and you range find some at 150 yards does it automatically adjust the crosshairs to that range?
Yes it will correct the crosshairs to that range if you have your ballistics data input into the scope.
@@AtncorpOptics ok great thanks for letting me know 👍👍
Does the abl also measure height of the target. I've noticed if the height is wrong it puts the crosshairs way off
The internal rangefinder measures the height of the target. ABL uses a laser which measures in a straight line.
@@AtncorpOptics you know I personally can think of about 5 things you can do to improve your scopes to make them that much better.. but I'm never going to be able to afford them so
Do you have to set all the environment and wind are dose the abl do all that for you
You need to set the environment and wind in the scope manually. The ABL only ranges the distance.
@@AtncorpOptics so every time am out shooting I would have to olter all the wind speed and environment setting?for the abl to work
@@mattk7715 Wind speed affects the bullet if you shoot at very long distances. You won't need to adjust that if the shots are under 400 yards.
@@AtncorpOptics I will be shooting up to 200 plus yards with a hmr so if I don't enter the wind speed and environment will the scope still automatically a just the point of impact?
@@mattk7715 Yes it will still adjust the POI.
Met deze uitleg is het zo geregeld. Dik tevreden...
I have the ABL...tried to zero at 50yrds but the laser doesn't show on the target...do I need to zero at night ?
Please give a call to our CS team at 800-910-2862. They can help guide you through the zero process
@@AtncorpOptics sorry guys ...reside in UK...I am OK with the zero process just cant get the laser to shine on the white target at 50yrds..can supply my e/mail address
@@paulheaton4934 Please contact www.atneu.com/
@@paulheaton4934 did you try a black target? Like a black and orange hi vis or a black t-shirt?
I zeroed mine at night using night vision mode on my X-Sight 4K at 48 yards. You can clearly see the laser but it shows up as an elongated dot, not a round dot. I zeroed it to the middle of the elongated dot.
I purchased the ABL 1500 for my ATN ThOR 4 640 4-40 and the ThOR 4 series ring is too small, so it won’t screw on to my scope. Without the proper ring there’s no way I can install the ABL 1500.
Please send an email to gsmith@ancorp.com with details of your issue and he can send out the needed ring.
@@AtncorpOptics Thanks
@@AtncorpOptics just wanna make sure the email you provided is it missing a letter? It appears that it is missing the “T” but I could be wrong.
@@aajr1961 The email is correct.
@@AtncorpOptics I got the abl1000 and have the X sight HD. When pairing it did not turn blue it is white but says it is paired does that matter??
I can not find the advanced settings option ??
So I’m assuming this is not compatible with the Thor LT series of scopes?
No sir, not compatible wit the ThOR LT.
Hi, i have ATN X sight 2, with ABL 100 connected, when i play the video footage back, there is no yardage displayed!
Do you have your ballistics calculator turned on?
Yes
@@AtncorpOptics Yes,
@@timothyjohn3006 Please give our CS team a call at 650-989-5100, they can help troubleshoot this with you. thank you.
When you zero the abl for the first time then turn it off, do you have to zero it again when your going to use it or does it stays zeroed?
You only need to zero the ABL once. Then every time you turn it on it will be good to go.
Even if you remove it from the scope?
@@Anthsv8 It is best to re-zero the ABL if removed from the scope.
Nice, so simple
Does the ballistic calculator have to be on when lasing and engaging targets to get the reticle to compensate for various ranges.
yes
Is ABL compatible with the Thor 4
Yes it is.
@@AtncorpOptics Placed my order and should have it in a few days. Thanks
And what if they don't pair???
Can zero be done at night to see the laser better?
50 yards at dusk works great
Hi once I've set up my ABL, if I remove it from the scope will I have to go through the whole set up procedure again or will it be ok just to refit to the scope and use again straight away?
If you remove the ABL from the scope you will need to re-zero the ABL reticle again.
@@AtncorpOptics ok thanks for letting me know
What happen when the abl cant paired
Can you check and make sure you have a fresh battery?
@@AtncorpOptics yes the battery is new
@@carlosgonzalez-vh1ve Give our CS team a call or send an email to gsmith@atncorp. They can help troubleshoot the issue with you.
Hope Youv fixed the battery problem!
Yes, this issue is resolved. Please update your scope to the latest firmware version www.atncorp.com/firmware
can you change from yards to mts?
Yes you can change the settings in the scope to meters and the rangefinder will adjust accordingly.
Hi how long will the battery last. Thank you Don
It will last you 12 hours sir.
That's not what I heard I'm going through and seeing countless reviews where they say the battery doesn't last at all 20 minutes dead it's crazy when companies try to upsell but cannot get back two people that's trying to figure out why it goes dead so fast
When are these in the UK
Simon Deeley they’re already in the U.K. mate
Does the normal built in RF have profiles for small game? Like dove and rabbit? Or do I have to buy this thing to get a zero on something that small?
And he says use lubricant to get the thing on. That’s a horrible idea unless it’s DSLR lube. You put 3in1 or kroil on that you’ll never get it off the lens surface without solvent. And most chemical solvents are death to electronics.
you can manually adjust the size of your target within the range finder settings.
Awesome...make the connection easy!!
Hi I can’t pair the ABL ???
Give a call to our CS team at 800-910-2862, they can help set up the ABL.
Hi I’m in the uk 👎 there is no power to the unit and no Bluetooth connection via scope or phone
@@andrewthompson4093 I would check the battery. Make sure that the plastic cover on the battery is off. Also could be a bad battery. Try a different one.
ATN Corp. yep have done think it’s just a bad connection won’t even show up on my phone for Bluetooth
@@andrewthompson4093 hey man, what did it turn out to be? Cause I have the same issue, replaced batteries twice. Thank you
Hola lo puedes traducir en español
Great information. Acoustics on it are horrible however.
It wasn’t centered
مرحباً أرجو إضافة الترجمة إلى اللغة العربية
Okay then, from now on instead of saying "positive side" I'm saying "battery nipple".
They’re American/Canadian what do you expect? Have to have everything spelled out to them in the most simplest way🤪
Very good job - overall. However, the speaker needs to learn to speak up and denunciate much better. There's just too many words he says that are not understandable.
Trash! I bought one and it doesn't work right at all!!
Does the ABL inhibit the forward focus ring?
No it does not.