Valentina Trousers block

Поділитися
Вставка
  • Опубліковано 1 лют 2025

КОМЕНТАРІ • 46

  • @cequejecoutequoi
    @cequejecoutequoi 3 роки тому +1

    Oh ! that's wonderful. A big big thank you to you, Sir, for this excellent work.
    Your video taught me 3 skills.
    1- How to optimize the "Increments" in "Variable table".
    2-How to correctly draw a Trousers basic block.
    3-How to better use the tool "Point intersect line and axis". It was all really a lot.
    So thank you also, for the surprise of the download link of the file. Your excellent gift will allow me to progress further with valentina.
    Good continuation !
    Hoping that Translate will have correctly translated my comment.
    Oh ! c'est magnifique. Un grand grand merci à vous, Monsieur, pour cet excellent travail.
    Votre vidéo m'a enseigné 3 compétences.
    1- Comment optimiser les "Increments" dans "Variable table".
    2-Comment tracer correctement un Trousers basic block.
    3-Comment mieux uliliser l'outil "Point intersect line and axis". Tout cela était dejà vraiment beaucoup.
    Alors merci aussi, pour la surprise du lien tèlèchargement du fichier. Votre excellent cadeau va me permettre de progresser d'avantage avec valentina.
    Bonne continuation !
    En espérant que Translate aura traduit correctement mon commentaire.

    • @stindedesign
      @stindedesign  3 роки тому +1

      Thanks a lot. I'm very happy of your words.

  • @Shannon-Townsend
    @Shannon-Townsend 4 роки тому

    Great Tutorial! Thank you so much for this video and the downloadable block.

  • @markvaladares6427
    @markvaladares6427 3 роки тому

    Yes so what are the layout changes you made? In the case of A8 the line width was not correct so what did you change it to? In the video this is at 24:05

    • @stindedesign
      @stindedesign  3 роки тому

      The error was that I forgot to change the line from solid to none, when I created the node. The values are correct.

  • @tecnica-de-voz
    @tecnica-de-voz 5 років тому +1

    Thank you for taking the time to create this great video. Is there any way to duplicate an existing pattern piece within the same project? one of my patterns is pretty much the same as another one except for a small variation and I don't wanna start all over the pattern piece from scratch. Thank you.

    • @stindedesign
      @stindedesign  5 років тому +3

      The easiest way is to save as another copy of the design and make the modifications in the new copy. I usually make the basic or minimum design as a base. Using the base for the alterations speeds up the design.

    • @tecnica-de-voz
      @tecnica-de-voz 5 років тому

      @@stindedesign Thank you very much for the advise. It makes perfect sense. Have a great day!!!

  • @ShikhaHaladker
    @ShikhaHaladker 6 років тому +2

    Can you please make a video on the detailing part. I know you are supposed to go only in a clockwise drection, but when darts and armhole curves for bodices, I always get stuck and the detailing gets all weird.
    Thank you!

    • @stindedesign
      @stindedesign  6 років тому +1

      Hi, I have planned to make more videos and detailing will be in it. When, I cannot guarantee, but I will.

    • @ShikhaHaladker
      @ShikhaHaladker 6 років тому

      @@stindedesign I'm still learning my way around with the software and most of the tutorials are in another langage so I was having some difficulty. Thank you!

    • @BlagovestDachev
      @BlagovestDachev 6 років тому

      Yes, please. This would be awesome!

    • @ShikhaHaladker
      @ShikhaHaladker 6 років тому

      @@stindedesign Alright, Thank you!

  • @SatoriDance
    @SatoriDance 2 роки тому

    Thank you for your video! I've never used the variables table for measurements, only a Tape measurement profile. I'm not sure I quite understand the difference between the two and why (or when) you would use one instead of the other. Is that something you would be willing to clarify?

    • @stindedesign
      @stindedesign  2 роки тому +1

      The clearest definition is that Tape values are personal measurements and the variables table is for pattern related values.

  • @markvaladares6427
    @markvaladares6427 3 роки тому

    Thankyou so much for responding. A8 is (front panel waist width front) which you got by taking (front hook width-0.5= 5.6-0.5= 5.1cm) and A9 is (front panel width) which you got by taking (hip line/4-0= 7.6/4-0 =1.9cm) later on when you make the corrections it isn't shown on the video. Can you message me the changes you made to get the new values. Waiting for your response. Thankyou

    • @stindedesign
      @stindedesign  3 роки тому

      The valueas are
      A8 #FrontPanelWaistWidthFront
      A9 #FrontPanelWidth
      The corrections I made in the video were layout changes. In the case of A8 the line width was not correct.
      If you need more, can you pinpoint the exact time in the video.

  • @markvaladares6427
    @markvaladares6427 3 роки тому

    okay. thanks. do you have a basic body block on valentina?

    • @stindedesign
      @stindedesign  3 роки тому

      I haven't made any video about it.

  • @markvaladares6427
    @markvaladares6427 3 роки тому

    What are the 2 corrections you made At A8 and A9? You did not show us how to correct it too. Otherwise the video is wonderful

    • @stindedesign
      @stindedesign  3 роки тому

      Thanks being so through.
      I’m not sure what was wrong in the video. However, all the values in the video are correct. I verified those in the original Valentina file.

  • @mariovenuto5
    @mariovenuto5 4 роки тому

    Greaat!!!! Thank you very much!!! Have you other tutorial? pleaseeeee :)) Thank you very much!

    • @stindedesign
      @stindedesign  4 роки тому +1

      Yes, I have planned to do more. Hopefully, in a few months.

    • @mariovenuto5
      @mariovenuto5 4 роки тому

      @@stindedesign Ohh fantastic! I will be very happy!! :)

  • @sandracabra9738
    @sandracabra9738 7 років тому

    Does valentina work for creting new designs? Patterns without the instructions to create them? Also, how to turn current paper patterns into valentina? Thank you very much!

    • @stindedesign
      @stindedesign  7 років тому

      The key benefit of Valentina is the ability to scale the pattern. For the scaling the relations between the lines and points must be defined.
      The Valentina could be used just for drawing tool by using fixed values in all places. The scaling is not possible.
      Normally all lines are in relation to the body values and the pattern scales with the new measurements.
      The paper pattern is difficult to convert to a real pattern, because the relations to the body is not known.

    • @sandracabra9738
      @sandracabra9738 7 років тому

      Thank you very much,yes, the capability to scale is amazing, I figured that was the main competency. Thank you again for clarifying.

  • @josereino779
    @josereino779 7 років тому +1

    Just curious, are these men's or women's trousers?

    • @stindedesign
      @stindedesign  7 років тому

      These are for both. Changing the parameters it fit men and women.

    • @josereino779
      @josereino779 7 років тому

      Stinde Design Ok, thank you very much! I just bought a Müller & Sohn ebook on skirts and trousers to check it out!

    • @stindedesign
      @stindedesign  7 років тому

      Good, you will find the pattern in the book.

    • @stindedesign
      @stindedesign  7 років тому

      The pattern fits for both, by adjusting the values correctly. In men trousers is more ease. I'm using the same for both.

  • @wojtekmejor
    @wojtekmejor 7 років тому +1

    Great tutorial! And great pattern.
    Can't open the file though. I get the message:
    "Exception: Invalid version. Maximum supported version is 0.2.4"
    Which version are you using? I have 0.4.5
    Do you have the file updated to a newer version?

    • @wojtekmejor
      @wojtekmejor 7 років тому

      Ok, I managed to fix the problem. I'm very happy to use the pattern now!:)

  • @Glovanaabe
    @Glovanaabe 4 роки тому

    how do I knw the values to use

    • @stindedesign
      @stindedesign  4 роки тому +1

      The measurement values are from the person you are making the trousers. The other adjustable values like hem height come from the design.

    • @Glovanaabe
      @Glovanaabe 4 роки тому

      @@stindedesign thank you

  • @amilcargonzalez3615
    @amilcargonzalez3615 5 років тому

    thanks for taking the time but I did not understand a single thing XD

    • @stindedesign
      @stindedesign  5 років тому

      I'm so sorry, if it was not understandable

  • @resident_spirit
    @resident_spirit 6 років тому

    I'm getting so angry watching this. Why aren't you using your mouse? No one can see your keyboard!

    • @stindedesign
      @stindedesign  6 років тому +1

      I'm using mouse all the time, because Valentina cannot be used with keyboard. Can't you see the mouse?

    • @resident_spirit
      @resident_spirit 6 років тому

      Stinde Design At the beginning you were using your shift key. And it seems like you continued to do so to access menus. I am not even 15 minutes into your video and have to stop following. Too bad because it looked interesting.

    • @stindedesign
      @stindedesign  6 років тому +1

      The shift-click or two finger click are the ways in MAC to click 'right' mouse button. In Windows and Linux just click right mouse button. Every time the menu appears in the drawing the 'right' mouse button is clicked. I think it is very visible.