Yes a needle valve always has that effect. You've got it. Even worse, a needle valve on the rod-end port can actually intensify the pressure from the blind-end port, due to the difference in surface areas on the opposing sides of the piston. This pressure can rise to a damaging level if all factors of the system design and the cylinder usage are not accounted for correctly. I hope that answer helped. Thanks for writing. - Carl
Hi, good animation! Many thanks. Could you please advise what we would have if we place a throttle between DC and check valves? From my point of view we would have issue with check, wouldn't we?
Hi Anubisdota. Not a stupid question at all! We build these simulations from scratch, one at a time. They're built using the same technology as websites (HTML, JavaScript, SVG). So, unfortunately, there's no software package available to help you build your own animations. Of course, if you're looking for more learning resources, we've got 265 (and counting) on our site: www.lunchboxsessions.com. Good luck in your learning journey!
Hello. I have the same problem with my hydraulic top link on my tractor. Is it right to install a needle valve after the dpoc valve on the rod side? And how can i choose the right needle valve?
Hi Prasad. We build the simulations ourselves. We used to build them in Adobe Flash, but now we just use the features of the web browser (SVG and JavaScript). You can learn more about these simulations on our company website: www.cdiginc.com/live-schematic
We've got some information about how we make these simulations here on our website: www.lunchboxsessions.com/help/what-software-do-you-use-to-make-the-simulations
We've got some information about how we make these simulations here on our website: www.lunchboxsessions.com/help/what-software-do-you-use-to-make-the-simulations
Very professional but easily to understand animation
Awesome channel and videos. Thanks for sharing!
Nicely explained !!
Thank from Vietnam!
Thanks to your channel. 유압을 공부하는데, 최고의 강의를 보여주네요. 감사합니다.
Very Good explaination.
Hi, at 1:57, can you tell why that non uniform extending was observed despite the check valve being in a fixed envelope?
Wow, this video just saved me big time!
Hi. Does this needle valve also increase temperatures due to the restrictions imposed to the system?
Yes a needle valve always has that effect. You've got it. Even worse, a needle valve on the rod-end port can actually intensify the pressure from the blind-end port, due to the difference in surface areas on the opposing sides of the piston. This pressure can rise to a damaging level if all factors of the system design and the cylinder usage are not accounted for correctly. I hope that answer helped. Thanks for writing. - Carl
thank you sir , i learned a lot from this video .
nice
Hi, good animation! Many thanks. Could you please advise what we would have if we place a throttle between DC and check valves? From my point of view we would have issue with check, wouldn't we?
Thanks🙏🙇
Hi sorry if its a stupid question but what software are you guys using and is there any way I can get my hands on it?
Hi Anubisdota. Not a stupid question at all! We build these simulations from scratch, one at a time. They're built using the same technology as websites (HTML, JavaScript, SVG). So, unfortunately, there's no software package available to help you build your own animations. Of course, if you're looking for more learning resources, we've got 265 (and counting) on our site: www.lunchboxsessions.com. Good luck in your learning journey!
You can use Automation studio, it does the samething
Very helpful...tnx!
Hello. I have the same problem with my hydraulic top link on my tractor. Is it right to install a needle valve after the dpoc valve on the rod side? And how can i choose the right needle valve?
which software you have used for simulation?
Hi Prasad. We build the simulations ourselves. We used to build them in Adobe Flash, but now we just use the features of the web browser (SVG and JavaScript). You can learn more about these simulations on our company website: www.cdiginc.com/live-schematic
what is the animation software the you are using ?
We've got some information about how we make these simulations here on our website: www.lunchboxsessions.com/help/what-software-do-you-use-to-make-the-simulations
what is the name of this nice simulation software ?
We've got some information about how we make these simulations here on our website: www.lunchboxsessions.com/help/what-software-do-you-use-to-make-the-simulations
I don't own a hydraulic system, but thank you anyway :)